[PATCH 4/6] arm64: dts: qcom: msm8976: Declare and use SDC1 pins

[Marijn Suijten]

Add the pinctrl states for SDC1 and use them on sdhc_1.

Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8976.dtsi | 55 +++++++++++++++++++++++++++
 1 file changed, 55 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8976.dtsi b/arch/arm64/boot/dts/qcom/msm8976.dtsi
index 05dcb30b0779..7d4c7548882c 100644
--- a/arch/arm64/boot/dts/qcom/msm8976.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8976.dtsi
@@ -508,6 +508,56 @@ tlmm: pinctrl@1000000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
+			sdc1_off_state: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_on_state: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
 			spi1_default: spi0-default-state {
 				spi-pins {
 					pins = "gpio0", "gpio1", "gpio3";
@@ -680,6 +730,11 @@ sdhc_1: mmc@7824000 {
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&rpmcc RPM_SMD_XO_CLK_SRC>;
 			clock-names = "iface", "core", "xo";
+
+			pinctrl-0 = <&sdc1_on_state>;
+			pinctrl-1 = <&sdc1_off_state>;
+			pinctrl-names = "default", "sleep";
+
 			status = "disabled";
 		};
 
-- 
2.39.0