Re: [PATCH] ARM: dts: n900: switch accelerometer to iio driver

[Krzysztof Kozlowski]

On 27/12/2022 23:38, Sicelo A. Mhlongo wrote:
> Since 8a7449d68670a8f9033d57b9e7997af77a900d53, lis302dl is supported by an iio

Use commit SHA ("title") format, as suggested by checkpatch.

> driver. Make the switch, to accommodate modern userspace, even though the iio
> interface lacks some of the extended features of the older driver
> 
> Signed-off-by: Sicelo A. Mhlongo <absicsz@xxxxxxxxx>
> ---
>  arch/arm/boot/dts/omap3-n900.dts | 53 +++++---------------------------
>  1 file changed, 8 insertions(+), 45 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
> index 6ba2e8f81973..94fa1d492fb4 100644
> --- a/arch/arm/boot/dts/omap3-n900.dts
> +++ b/arch/arm/boot/dts/omap3-n900.dts
> @@ -767,56 +767,19 @@ &i2c3 {
>  
>  	clock-frequency = <400000>;
>  
> -	lis302dl: lis3lv02d@1d {
> -		compatible = "st,lis3lv02d";
> +	lis302dl: lis302dl@1d {

That's not really explained in commit msg and does not look related to
your goal. If changing - in separate patch - make the node name generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +		compatible = "st,lis302dl";
>  		reg = <0x1d>;
>  
> -		Vdd-supply = <&vaux1>;
> -		Vdd_IO-supply = <&vio>;
> +		vdd-supply = <&vaux1>;
> +		vddio-supply = <&vio>;

Does not look related/explained in commit msg.

>  
>  		interrupt-parent = <&gpio6>;
> -		interrupts = <21 20>; /* 181 and 180 */
> -
> -		/* click flags */
> -		st,click-single-x;
> -		st,click-single-y;
> -		st,click-single-z;
> -
> -		/* Limits are 0.5g * value */
> -		st,click-threshold-x = <8>;
> -		st,click-threshold-y = <8>;
> -		st,click-threshold-z = <10>;
> -
> -		/* Click must be longer than time limit */
> -		st,click-time-limit = <9>;
> -
> -		/* Kind of debounce filter */
> -		st,click-latency = <50>;
> -
> -		/* Interrupt line 2 for click detection */
> -		st,irq2-click;
> -
> -		st,wakeup-x-hi;
> -		st,wakeup-y-hi;
> -		st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
> -
> -		st,wakeup2-z-hi;
> -		st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
> -
> -		st,hipass1-disable;
> -		st,hipass2-disable;
> -
> -		st,axis-x = <1>;    /* LIS3_DEV_X */
> -		st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
> -		st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
> -
> -		st,min-limit-x = <(-32)>;
> -		st,min-limit-y = <3>;
> -		st,min-limit-z = <3>;
> +		interrupts = <21 IRQ_TYPE_EDGE_RISING>, <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */

Does not fit in 80-wrap length.

>  
> -		st,max-limit-x = <(-3)>;
> -		st,max-limit-y = <32>;
> -		st,max-limit-z = <32>;
> +		mount-matrix =	 "-1",  "0",  "0",
> +				  "0",  "1",  "0",
> +				  "0",  "0",  "1";
>  	};
>  
>  	cam1: camera@3e {

Best regards,
Krzysztof