[PATCH 05/18] arm64: dts: qcom: ipq6018: Add/remove some newlines
From: Konrad Dybcio
Date: Sat Dec 31 2022 - 07:59:40 EST
Some lines were broken very aggresively, presumably to fit under 80 chars
and some places could have used a newline, particularly between subsequent
nodes. Address all that and remove redundant comments near PCIe ranges
while at it so as not to exceed 100 chars needlessly.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index 5452bb85f8e1..6b4f653239ab 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -102,26 +102,31 @@ opp-864000000 {
opp-microvolt = <725000>;
clock-latency-ns = <200000>;
};
+
opp-1056000000 {
opp-hz = /bits/ 64 <1056000000>;
opp-microvolt = <787500>;
clock-latency-ns = <200000>;
};
+
opp-1320000000 {
opp-hz = /bits/ 64 <1320000000>;
opp-microvolt = <862500>;
clock-latency-ns = <200000>;
};
+
opp-1440000000 {
opp-hz = /bits/ 64 <1440000000>;
opp-microvolt = <925000>;
clock-latency-ns = <200000>;
};
+
opp-1608000000 {
opp-hz = /bits/ 64 <1608000000>;
opp-microvolt = <987500>;
clock-latency-ns = <200000>;
};
+
opp-1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1062500>;
@@ -131,8 +136,7 @@ opp-1800000000 {
pmuv8: pmu {
compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) |
- IRQ_TYPE_LEVEL_HIGH)>;
+ interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
psci: psci {
@@ -734,24 +738,18 @@ pcie0: pci@20000000 {
phys = <&pcie_phy0>;
phy-names = "pciephy";
- ranges = <0x81000000 0 0x20200000 0 0x20200000
- 0 0x10000>, /* downstream I/O */
- <0x82000000 0 0x20220000 0 0x20220000
- 0 0xfde0000>; /* non-prefetchable memory */
+ ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>,
+ <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 75
- IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 78
- IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 79
- IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 83
- IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
<&gcc GCC_PCIE0_AXI_M_CLK>,
--
2.39.0