Re: [RESEND PATCH v5 0/2] Add LED driver for flash module in QCOM PMICs

[Fenglin Wu]

Hi Pavel, Jones,

Can you help to review the new flash LED driver changes for Qcom flash 
LED module when you are available? It's pending for while.
Thanks

Fenglin

On 2022/12/27 16:15, Fenglin Wu wrote:
> Initial driver and binding document changes for supporting flash LED
> module in Qualcomm Technologies, Inc. PMICs.
>
> Changes in V5:
>    1. Add MODULE_DEVICE_TABLE for auto-loading.
>
> Changes in V4:
>    1. Added Tested-By tag.
>    2. Addressed review comments in the binding change and added
>       Reviewed-by tag.
>
> Changes in V3:
>    1. Updated the driver to use regmap_field for register access.
>    2. Adressed the review comments in binding document change.
>
> Changes in V2:
>    1. Addressed review comments in binding change, thanks Krzysztof!
>    2. Updated driver to address the compilation issue reported by
>       kernel test robot.
>
> Fenglin Wu (2):
>    leds: flash: add driver to support flash LED module in QCOM PMICs
>    dt-bindings: leds: add QCOM flash LED controller
>
>   .../bindings/leds/qcom,spmi-flash-led.yaml    | 116 +++
>   drivers/leds/flash/Kconfig                    |  15 +
>   drivers/leds/flash/Makefile                   |   1 +
>   drivers/leds/flash/leds-qcom-flash.c          | 701 ++++++++++++++++++
>   4 files changed, 833 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
>   create mode 100644 drivers/leds/flash/leds-qcom-flash.c