Re: [RESEND PATCH v5 0/2] Add LED driver for flash module in QCOM PMICs

[Lee Jones]

On Thu, 05 Jan 2023, Fenglin Wu wrote:

> Hi Pavel, Jones,
> 
> Can you help to review the new flash LED driver changes for Qcom flash LED
> module when you are available? It's pending for while.
> Thanks

The patches I have in my inbox are from last week.

Please be patient - my backlog is presently very large.

You're 'on the list'.

> On 2022/12/27 16:15, Fenglin Wu wrote:
> > Initial driver and binding document changes for supporting flash LED
> > module in Qualcomm Technologies, Inc. PMICs.
> > 
> > Changes in V5:
> >    1. Add MODULE_DEVICE_TABLE for auto-loading.
> > 
> > Changes in V4:
> >    1. Added Tested-By tag.
> >    2. Addressed review comments in the binding change and added
> >       Reviewed-by tag.
> > 
> > Changes in V3:
> >    1. Updated the driver to use regmap_field for register access.
> >    2. Adressed the review comments in binding document change.
> > 
> > Changes in V2:
> >    1. Addressed review comments in binding change, thanks Krzysztof!
> >    2. Updated driver to address the compilation issue reported by
> >       kernel test robot.
> > 
> > Fenglin Wu (2):
> >    leds: flash: add driver to support flash LED module in QCOM PMICs
> >    dt-bindings: leds: add QCOM flash LED controller
> > 
> >   .../bindings/leds/qcom,spmi-flash-led.yaml    | 116 +++
> >   drivers/leds/flash/Kconfig                    |  15 +
> >   drivers/leds/flash/Makefile                   |   1 +
> >   drivers/leds/flash/leds-qcom-flash.c          | 701 ++++++++++++++++++
> >   4 files changed, 833 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/leds/qcom,spmi-flash-led.yaml
> >   create mode 100644 drivers/leds/flash/leds-qcom-flash.c
> > 

-- 
Lee Jones [李琼斯]