Re: [PATCH net-next 1/1] drivers/phylib: fix coverity issue
From: Jacob Keller
Date: Tue Jan 17 2023 - 18:59:45 EST
On 1/17/2023 1:47 PM, Piergiorgio Beruto wrote:
> Coverity reported the following:
>
> *** CID 1530573: (UNINIT)
> drivers/net/phy/phy-c45.c:1036 in genphy_c45_plca_set_cfg()
> 1030 return ret;
> 1031
> 1032 val = ret;
> 1033 }
> 1034
> 1035 if (plca_cfg->node_cnt >= 0)
> vvv CID 1530573: (UNINIT)
> vvv Using uninitialized value "val".
> 1036 val = (val & ~MDIO_OATC14_PLCA_NCNT) |
> 1037 (plca_cfg->node_cnt << 8);
> 1038
> 1039 if (plca_cfg->node_id >= 0)
> 1040 val = (val & ~MDIO_OATC14_PLCA_ID) |
> 1041 (plca_cfg->node_id);
> drivers/net/phy/phy-c45.c:1076 in genphy_c45_plca_set_cfg()
> 1070 return ret;
> 1071
> 1072 val = ret;
> 1073 }
> 1074
> 1075 if (plca_cfg->burst_cnt >= 0)
> vvv CID 1530573: (UNINIT)
> vvv Using uninitialized value "val".
> 1076 val = (val & ~MDIO_OATC14_PLCA_MAXBC) |
> 1077 (plca_cfg->burst_cnt << 8);
> 1078
> 1079 if (plca_cfg->burst_tmr >= 0)
> 1080 val = (val & ~MDIO_OATC14_PLCA_BTMR) |
> 1081 (plca_cfg->burst_tmr);
>
> This is not actually creating a real problem because the path leading to
> 'val' being used uninitialized will eventually override the full content
> of that variable before actually using it for writing the register.
> However, the fix is simple and comes at basically no cost.
>
Makes sense, and its better to be clear, and prevent the introduction of
a bug later if somehow it refactored such that the value is not
re-initialized before use in that case.
Reviewed-by: Jacob Keller <jacob.e.keller@xxxxxxxxx>
> Signed-off-by: Piergiorgio Beruto <piergiorgio.beruto@xxxxxxxxx>
> Reported-by: coverity-bot <keescook+coverity-bot@xxxxxxxxxxxx>
> Addresses-Coverity-ID: 1530573 ("UNINIT")
> Fixes: 493323416fed ("drivers/net/phy: add helpers to get/set PLCA configuration")
> ---
> drivers/net/phy/phy-c45.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
> index cff83220595c..9f9565a4819d 100644
> --- a/drivers/net/phy/phy-c45.c
> +++ b/drivers/net/phy/phy-c45.c
> @@ -999,8 +999,8 @@ EXPORT_SYMBOL_GPL(genphy_c45_plca_get_cfg);
> int genphy_c45_plca_set_cfg(struct phy_device *phydev,
> const struct phy_plca_cfg *plca_cfg)
> {
> + u16 val = 0;
> int ret;
> - u16 val;
>
> // PLCA IDVER is read-only
> if (plca_cfg->version >= 0)