Yes agreed. Will update this in V3
On 17.02.2023 14:41, Devi Priya wrote:
The subject is.. weird.. something like:
clk: qcom: apss-ipq-pll: add support for IPQ9574
would have made more sense, as you're not enabling the clock
driver, and certainly not *in* the SoC.
Okay
Add the compatible and configuration valuesGenerally the lines in commit messages should be broken at 70-75
chars, not 40.
yes, it isfor A73 Huayra PLL found on IPQ9574Is Praveenkumar's last name "I"?
Co-developed-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
Signed-off-by: Praveenkumar I <quic_ipkumar@xxxxxxxxxxx>
Sure, thanks
Signed-off-by: Devi Priya <quic_devipriy@xxxxxxxxxxx>Otherwise the code looks good, I think.
---
Best Regards,
Konrad
Changes in V2:
- Rebased the changes on the below series which refactors the
driver to accommodate Huayra & Stromer Plus PLLs
https://lore.kernel.org/linux-arm-msm/20230217083308.12017-2-quic_kathirav@xxxxxxxxxxx/
- Changed the hex value in ipq9574_pll_config to lowercase
- Dropped the mailbox driver changes as ipq9574 mailbox is
compatible with ipq6018
drivers/clk/qcom/apss-ipq-pll.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c
index cf4f0d340cbf..ce28d882ee78 100644
--- a/drivers/clk/qcom/apss-ipq-pll.c
+++ b/drivers/clk/qcom/apss-ipq-pll.c
@@ -111,6 +111,18 @@ static const struct alpha_pll_config ipq8074_pll_config = {
.test_ctl_hi_val = 0x4000,
};
+static const struct alpha_pll_config ipq9574_pll_config = {
+ .l = 0x3b,
+ .config_ctl_val = 0x200d4828,
+ .config_ctl_hi_val = 0x6,
+ .early_output_mask = BIT(3),
+ .aux2_output_mask = BIT(2),
+ .aux_output_mask = BIT(1),
+ .main_output_mask = BIT(0),
+ .test_ctl_val = 0x0,
+ .test_ctl_hi_val = 0x4000,
+};
+
struct apss_pll_data {
int pll_type;
struct clk_alpha_pll *pll;
@@ -135,6 +147,12 @@ static struct apss_pll_data ipq6018_pll_data = {
.pll_config = &ipq6018_pll_config,
};
+static struct apss_pll_data ipq9574_pll_data = {
+ .pll_type = CLK_ALPHA_PLL_TYPE_HUAYRA,
+ .pll = &ipq_pll_huayra,
+ .pll_config = &ipq9574_pll_config,
+};
+
static const struct regmap_config ipq_pll_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -180,6 +198,7 @@ static const struct of_device_id apss_ipq_pll_match_table[] = {
{ .compatible = "qcom,ipq5332-a53pll", .data = &ipq5332_pll_data },
{ .compatible = "qcom,ipq6018-a53pll", .data = &ipq6018_pll_data },
{ .compatible = "qcom,ipq8074-a53pll", .data = &ipq8074_pll_data },
+ { .compatible = "qcom,ipq9574-a73pll", .data = &ipq9574_pll_data },
{ }
};
MODULE_DEVICE_TABLE(of, apss_ipq_pll_match_table);