Re: [PATCH v1 1/3] dt-bindings: clock: Add StarFive JH7110 PLL clock generator

[Xingyu Wu]

On 2023/2/22 17:11, Krzysztof Kozlowski wrote:
> On 21/02/2023 15:11, Xingyu Wu wrote:
>> Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.
> 
> Just one sentence... not explaining anything around ABI break. Nope.
> 
>> 
>> Signed-off-by: Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
>> ---
>>  .../bindings/clock/starfive,jh7110-pll.yaml   | 45 +++++++++++++++++++
>>  .../dt-bindings/clock/starfive,jh7110-crg.h   | 12 ++---
>>  2 files changed, 52 insertions(+), 5 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>> new file mode 100644
>> index 000000000000..8fd18e6c2e9b
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>> @@ -0,0 +1,45 @@
>> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive JH7110 PLL Clock Generator
>> +
>> +maintainers:
>> +  - Xingyu Wu <xingyu.wu@xxxxxxxxxxxxxxxx>
>> +
>> +properties:
>> +  compatible:
>> +    const: starfive,jh7110-pll
>> +
>> +  clocks:
>> +    maxItems: 1
>> +      - description: Main Oscillator (24 MHz)
> 
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).

Remove the ' - ' before 'description' and pass the dt_binding_check.

> 
>> +
>> +  '#clock-cells':
>> +    const: 1
>> +    description:
>> +      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
>> +
>> +  starfive,sysreg:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> 
> That's not how the property is modeled... look at other code.

Remove the '-array'.

> 
>> +    description:
>> +      the phandle to System Register Controller syscon node.
>> +
>> +required:
>> +  - compatible
>> +  - clocks
>> +  - '#clock-cells'
>> +  - starfive,sysreg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    pllclk: pll-clock-controller {
>> +      compatible = "starfive,jh7110-pll";
>> +      clocks = <&osc>;
>> +      #clock-cells = <1>;
>> +      starfive,sysreg = <&sys_syscon>;
>> +    };
>> diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
>> index 5e4f21ca0642..086a6ddcf380 100644
>> --- a/include/dt-bindings/clock/starfive,jh7110-crg.h
>> +++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
>> @@ -6,6 +6,12 @@
>>  #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>>  #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>>  
>> +/* PLL clocks */
>> +#define JH7110_CLK_PLL0_OUT			0
>> +#define JH7110_CLK_PLL1_OUT			1
>> +#define JH7110_CLK_PLL2_OUT			2
>> +#define JH7110_PLLCLK_END			3
>> +
>>  /* SYSCRG clocks */
>>  #define JH7110_SYSCLK_CPU_ROOT			0
>>  #define JH7110_SYSCLK_CPU_CORE			1
>> @@ -198,11 +204,7 @@
>>  #define JH7110_SYSCLK_TDM_TDM_INV		188
>>  #define JH7110_SYSCLK_JTAG_CERTIFICATION_TRNG	189
>>  
>> -#define JH7110_SYSCLK_PLL0_OUT			190
>> -#define JH7110_SYSCLK_PLL1_OUT			191
>> -#define JH7110_SYSCLK_PLL2_OUT			192
>> -
> 
> 
> NAK. ABI break. You have entire commit msg to explain this and avoid
> questions from reviewers.
> 

Discussed with Hal.Feng to delete this part and move it to driver in his next patch series.

Best regards,
Xingyu Wu