Re: [RFC PATCH net] net: dsa: mt7530: move PLL setup out of port 6 pad configuration

[Russell King (Oracle)]

On Sat, Mar 04, 2023 at 03:54:54PM +0300, arinc9.unal@xxxxxxxxx wrote:
> From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> 
> Move the PLL setup of the MT7530 switch out of the pad configuration of
> port 6 to mt7530_setup, after reset.
> 
> This fixes the improper initialisation of the switch when only port 5 is
> used as a CPU port.
> 
> Add supported phy modes of port 5 on the PLL setup.
> 
> Remove now incorrect comment regarding P5 as GMAC5.

If this is what is necessary, you're taking some of the configuration
out of phylink's control, effectively making port 6 a fixed-interface
mode port. In that case, there should only ever be one interface
mode set in port 6's supported_interface mask, so that phylink knows
that no other interface modes can be selected for that port.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!