Re: [RFC PATCH net] net: dsa: mt7530: move PLL setup out of port 6 pad configuration

[Arınç ÜNAL]

On 4.03.2023 16:04, Russell King (Oracle) wrote:
> On Sat, Mar 04, 2023 at 03:54:54PM +0300, arinc9.unal@xxxxxxxxx wrote:
> > From: Arınç ÜNAL <arinc.unal@xxxxxxxxxx>
> >
> > Move the PLL setup of the MT7530 switch out of the pad configuration of
> > port 6 to mt7530_setup, after reset.
> >
> > This fixes the improper initialisation of the switch when only port 5 is
> > used as a CPU port.
> >
> > Add supported phy modes of port 5 on the PLL setup.
> >
> > Remove now incorrect comment regarding P5 as GMAC5.
>
> If this is what is necessary, you're taking some of the configuration
> out of phylink's control, effectively making port 6 a fixed-interface
> mode port. In that case, there should only ever be one interface
> mode set in port 6's supported_interface mask, so that phylink knows
> that no other interface modes can be selected for that port.

Thanks for the heads up Russell.

Arınç