Re: [RFC/PATCHSET 0/8] perf record: Implement BPF sample filter (v3)

From: Jiri Olsa
Date: Tue Mar 07 2023 - 17:35:46 EST

Next message: NeilBrown: "Re: [regression] Bug 217074 - upgrading to kernel 6.1.12 from 5.15.x can no longer assemble software raid0"
Previous message: Christian Marangi: "[net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node"
In reply to: Namhyung Kim: "Re: [RFC/PATCHSET 0/8] perf record: Implement BPF sample filter (v3)"
Next in thread: Namhyung Kim: "Re: [RFC/PATCHSET 0/8] perf record: Implement BPF sample filter (v3)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Feb 22, 2023 at 03:01:33PM -0800, Namhyung Kim wrote:
> Hello,
>
> There have been requests for more sophisticated perf event sample
> filtering based on the sample data. Recently the kernel added BPF
> programs can access perf sample data and this is the userspace part
> to enable such a filtering.
>
> This still has some rough edges and needs more improvements. But
> I'd like to share the current work and get some feedback for the
> directions and idea for further improvements.
>
> v3 changes)
> * fix build error on old kernels/vmlinux (Arnaldo)
> * move the logic to evlist__apply_filters (Jiri)
> * improve error message for bad input

had same issue to compile it without BUILD_BPF_SKEL=1 as Adrian
reported, but with that fixed it looks good

Acked-by: Jiri Olsa <jolsa@xxxxxxxxxx>

thanks,
jirka

>
> v2 changes)
> * fix build error with the misc field (Jiri)
> * add a destructor for filter expr (Ian)
> * remove 'bpf:' prefix (Arnaldo)
> * add '||' operator
>
> The required kernel changes are now in the mainline tree (for v6.3).
> perf record has --filter option to set filters on the last specified
> event in the command line. It worked only for tracepoints and Intel
> PT events so far. This patchset extends it to use BPF in order to
> enable the general sample filters for any events.
>
> A new filter expression parser was added (using flex/bison) to process
> the filter string. Right now, it only accepts very simple expressions
> separated by comma. I'd like to keep the filter expression as simple
> as possible.
>
> It requires samples satisfy all the filter expressions otherwise it'd
> drop the sample. IOW filter expressions are connected with logical AND
> operations unless they used "||" explicitly. So if user has something
> like 'A, B || C, D', then BOTH A and D should be true AND either B or C
> also needs to be true.
>
> Essentially the BPF filter expression is:
>
> <term> <operator> <value> (("," | "||") <term> <operator> <value>)*
>
> The <term> can be one of:
> ip, id, tid, pid, cpu, time, addr, period, txn, weight, phys_addr,
> code_pgsz, data_pgsz, weight1, weight2, weight3, ins_lat, retire_lat,
> p_stage_cyc, mem_op, mem_lvl, mem_snoop, mem_remote, mem_lock,
> mem_dtlb, mem_blk, mem_hops
>
> The <operator> can be one of:
> ==, !=, >, >=, <, <=, &
>
> The <value> can be one of:
> <number> (for any term)
> na, load, store, pfetch, exec (for mem_op)
> l1, l2, l3, l4, cxl, io, any_cache, lfb, ram, pmem (for mem_lvl)
> na, none, hit, miss, hitm, fwd, peer (for mem_snoop)
> remote (for mem_remote)
> na, locked (for mem_locked)
> na, l1_hit, l1_miss, l2_hit, l2_miss, any_hit, any_miss, walk, fault (for mem_dtlb)
> na, by_data, by_addr (for mem_blk)
> hops0, hops1, hops2, hops3 (for mem_hops)
>
> I plan to improve it with range expressions like for ip or addr and it
> should support symbols like the existing addr-filters. Also cgroup
> should understand and convert cgroup names to IDs.
>
> Let's take a look at some examples. The following is to profile a user
> program on the command line. When the frequency mode is used, it starts
> with a very small period (i.e. 1) and adjust it on every interrupt (NMI)
> to catch up the given frequency.
>
> $ ./perf record -- ./perf test -w noploop
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.263 MB perf.data (4006 samples) ]
>
> $ ./perf script -F pid,period,event,ip,sym | head
> 36695 1 cycles: ffffffffbab12ddd perf_event_exec
> 36695 1 cycles: ffffffffbab12ddd perf_event_exec
> 36695 5 cycles: ffffffffbab12ddd perf_event_exec
> 36695 46 cycles: ffffffffbab12de5 perf_event_exec
> 36695 1163 cycles: ffffffffba80a0eb x86_pmu_disable_all
> 36695 1304 cycles: ffffffffbaa19507 __hrtimer_get_next_event
> 36695 8143 cycles: ffffffffbaa186f9 __run_timers
> 36695 69040 cycles: ffffffffbaa0c393 rcu_segcblist_ready_cbs
> 36695 355117 cycles: 4b0da4 noploop
> 36695 321861 cycles: 4b0da4 noploop
>
> If you want to skip the first few samples that have small periods, you
> can do like this (note it requires root due to BPF).
>
> $ sudo ./perf record -e cycles --filter 'period > 10000' -- ./perf test -w noploop
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 0.262 MB perf.data (3990 samples) ]
>
> $ sudo ./perf script -F pid,period,event,ip,sym | head
> 39524 58253 cycles: ffffffffba97dac0 update_rq_clock
> 39524 232657 cycles: 4b0da2 noploop
> 39524 210981 cycles: 4b0da2 noploop
> 39524 282882 cycles: 4b0da4 noploop
> 39524 392180 cycles: 4b0da4 noploop
> 39524 456058 cycles: 4b0da4 noploop
> 39524 415196 cycles: 4b0da2 noploop
> 39524 462721 cycles: 4b0da4 noploop
> 39524 526272 cycles: 4b0da2 noploop
> 39524 565569 cycles: 4b0da4 noploop
>
> Maybe more useful example is when it deals with precise memory events.
> On AMD processors with IBS, you can filter only memory load with L1
> dTLB is missed like below.
>
> $ sudo ./perf record -ad -e ibs_op//p \
> > --filter 'mem_op == load, mem_dtlb > l1_hit' sleep 1
> [ perf record: Woken up 1 times to write data ]
> [ perf record: Captured and wrote 1.338 MB perf.data (15 samples) ]
>
> $ sudo ./perf script -F data_src | head
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 49080142 |OP LOAD|LVL L1 hit|SNP N/A|TLB L2 hit|LCK N/A|BLK N/A
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 51088842 |OP LOAD|LVL L3 or Remote Cache (1 hop) hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
> 49080442 |OP LOAD|LVL L2 hit|SNP N/A|TLB L2 hit|LCK N/A|BLK N/A
> 51080242 |OP LOAD|LVL LFB/MAB hit|SNP N/A|TLB L2 miss|LCK N/A|BLK N/A
>
> You can also check the number of dropped samples in LOST_SAMPLES events
> using perf report --stat command.
>
> $ sudo ./perf report --stat
>
> Aggregated stats:
> TOTAL events: 16066
> MMAP events: 22 ( 0.1%)
> COMM events: 4166 (25.9%)
> EXIT events: 1 ( 0.0%)
> THROTTLE events: 816 ( 5.1%)
> UNTHROTTLE events: 613 ( 3.8%)
> FORK events: 4165 (25.9%)
> SAMPLE events: 15 ( 0.1%)
> MMAP2 events: 6133 (38.2%)
> LOST_SAMPLES events: 1 ( 0.0%)
> KSYMBOL events: 69 ( 0.4%)
> BPF_EVENT events: 57 ( 0.4%)
> FINISHED_ROUND events: 3 ( 0.0%)
> ID_INDEX events: 1 ( 0.0%)
> THREAD_MAP events: 1 ( 0.0%)
> CPU_MAP events: 1 ( 0.0%)
> TIME_CONV events: 1 ( 0.0%)
> FINISHED_INIT events: 1 ( 0.0%)
> ibs_op//p stats:
> SAMPLE events: 15
> LOST_SAMPLES events: 3991
>
> Note that the total aggregated stats show 1 LOST_SAMPLES event but
> per event stats show 3991 events because it's the actual number of
> dropped samples while the aggregated stats has the number of record.
> Maybe we need to change the per-event stats to 'LOST_SAMPLES count'
> to avoid the confusion.
>
> The code is available at 'perf/bpf-filter-v3' branch in my tree.
>
> git://git.kernel.org/pub/scm/linux/kernel/git/namhyung/linux-perf.git
>
> Any feedback is welcome.
>
> Thanks,
> Namhyung
>
> Namhyung Kim (8):
> perf bpf filter: Introduce basic BPF filter expression
> perf bpf filter: Implement event sample filtering
> perf record: Add BPF event filter support
> perf record: Record dropped sample count
> perf bpf filter: Add 'pid' sample data support
> perf bpf filter: Add more weight sample data support
> perf bpf filter: Add data_src sample data support
> perf bpf filter: Add logical OR operator
>
> tools/lib/perf/include/perf/event.h | 2 +
> tools/perf/Documentation/perf-record.txt | 15 +-
> tools/perf/Makefile.perf | 2 +-
> tools/perf/builtin-record.c | 38 ++--
> tools/perf/util/Build | 16 ++
> tools/perf/util/bpf-filter.c | 135 +++++++++++++++
> tools/perf/util/bpf-filter.h | 49 ++++++
> tools/perf/util/bpf-filter.l | 159 +++++++++++++++++
> tools/perf/util/bpf-filter.y | 78 +++++++++
> tools/perf/util/bpf_counter.c | 3 +-
> tools/perf/util/bpf_skel/sample-filter.h | 27 +++
> tools/perf/util/bpf_skel/sample_filter.bpf.c | 172 +++++++++++++++++++
> tools/perf/util/evlist.c | 25 ++-
> tools/perf/util/evsel.c | 2 +
> tools/perf/util/evsel.h | 7 +-
> tools/perf/util/parse-events.c | 8 +-
> tools/perf/util/session.c | 3 +-
> 17 files changed, 706 insertions(+), 35 deletions(-)
> create mode 100644 tools/perf/util/bpf-filter.c
> create mode 100644 tools/perf/util/bpf-filter.h
> create mode 100644 tools/perf/util/bpf-filter.l
> create mode 100644 tools/perf/util/bpf-filter.y
> create mode 100644 tools/perf/util/bpf_skel/sample-filter.h
> create mode 100644 tools/perf/util/bpf_skel/sample_filter.bpf.c
>
>
> base-commit: f9fa0778ee7349a9aa3d2ea10e9f2ab843a0b44e
> --
> 2.39.2.637.g21b0678d19-goog
>

Next message: NeilBrown: "Re: [regression] Bug 217074 - upgrading to kernel 6.1.12 from 5.15.x can no longer assemble software raid0"
Previous message: Christian Marangi: "[net-next PATCH 10/11] dt-bindings: net: phy: Document support for LEDs node"
In reply to: Namhyung Kim: "Re: [RFC/PATCHSET 0/8] perf record: Implement BPF sample filter (v3)"
Next in thread: Namhyung Kim: "Re: [RFC/PATCHSET 0/8] perf record: Implement BPF sample filter (v3)"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]