[PATCH v1 12/14] arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage to 0.81V

[Martin Kepplinger]

From: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>

0.8V is outside of the operating voltage specified for imx8mq, see
chapter 3.1.4 "Operating ranges" of the IMX8MDQLQCEC document.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index f557632f574fa..7e70663cffa30 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -841,7 +841,7 @@ buck1_reg: BUCK1 {
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <880000>;
 				rohm,dvs-idle-voltage = <820000>;
-				rohm,dvs-suspend-voltage = <800000>;
+				rohm,dvs-suspend-voltage = <810000>;
 				regulator-always-on;
 			};
 
-- 
2.30.2