[RFC PATCH v1] usb/phy add sprd ums512 usbphy
From: Cixi Geng
Date: Sun Mar 12 2023 - 13:22:15 EST
From: Cixi Geng <cixi.geng1@xxxxxxxxxx>
This driver is support USB2 phy for Spreadtrum UMS512 SOC's,
Signed-off-by: Cixi Geng <cixi.geng1@xxxxxxxxxx>
---
drivers/usb/phy/Kconfig | 10 +
drivers/usb/phy/Makefile | 1 +
drivers/usb/phy/phy-sprd-ums512.c | 511 ++++++++++++++++++++++++++++++
drivers/usb/phy/phy-sprd-ums512.h | 39 +++
4 files changed, 561 insertions(+)
create mode 100644 drivers/usb/phy/phy-sprd-ums512.c
create mode 100644 drivers/usb/phy/phy-sprd-ums512.h
diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
index 5f629d7cad64..fa5564e6f3a3 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -158,6 +158,16 @@ config USB_TEGRA_PHY
This driver provides PHY support for the USB controllers found
on NVIDIA Tegra SoC's.
+config USB_SPRD_UMS512_PHY
+ tristate "Spreadtrum ums512 USB2 PHY Driver"
+ depends on ARCH_SPRD || COMPILE_TEST
+ select USB_PHY
+ select EXTCON_USB_GPIO
+ help
+ Enable this to support the SPRD ums512 USB2 PHY that is part of SOC.
+ This driver takes care of all the PHY functionality, normally paired with
+ DesignWare USB20 (DRD) Controller.
+
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM || ARM64 || COMPILE_TEST
diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
index e5d619b4d8f6..ce45ee0f12a8 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
@@ -22,4 +22,5 @@ obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
+obj-$(CONFIG_USB_SPRD_UMS512_PHY) += phy-sprd-ums512.o
obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
diff --git a/drivers/usb/phy/phy-sprd-ums512.c b/drivers/usb/phy/phy-sprd-ums512.c
new file mode 100644
index 000000000000..025f45e8d509
--- /dev/null
+++ b/drivers/usb/phy/phy-sprd-ums512.c
@@ -0,0 +1,511 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for Unisoc USB PHY driver
+ *
+ * Copyright (C) 2023 Unisoc Inc.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/phy.h>
+#include <uapi/linux/usb/charger.h>
+
+#include "phy-sprd-ums512.h"
+
+struct sprd_hsphy {
+ struct device *dev;
+ struct usb_phy phy;
+ struct regulator *vdd;
+ struct regmap *hsphy_glb;
+ struct regmap *ana_g2;
+ struct regmap *pmic;
+ u32 vdd_vol;
+ atomic_t reset;
+ atomic_t inited;
+ bool is_host;
+};
+
+#define TUNEHSAMP_2_6MA (3 << 25)
+#define TFREGRES_TUNE_VALUE (0x14 << 19)
+#define SC2730_CHARGE_STATUS 0x1b9c
+#define BIT_CHG_DET_DONE BIT(11)
+#define BIT_SDP_INT BIT(7)
+#define BIT_DCP_INT BIT(6)
+#define BIT_CDP_INT BIT(5)
+
+static enum usb_charger_type sc27xx_charger_detect(struct regmap *regmap)
+{
+ enum usb_charger_type type;
+ u32 status = 0, val;
+ int ret, cnt = 10;
+
+ do {
+ ret = regmap_read(regmap, SC2730_CHARGE_STATUS, &val);
+ if (ret)
+ return UNKNOWN_TYPE;
+
+ if (val & BIT_CHG_DET_DONE) {
+ status = val & (BIT_CDP_INT | BIT_DCP_INT | BIT_SDP_INT);
+ break;
+ }
+
+ msleep(200);
+ } while (--cnt > 0);
+
+ switch (status) {
+ case BIT_CDP_INT:
+ type = CDP_TYPE;
+ break;
+ case BIT_DCP_INT:
+ type = DCP_TYPE;
+ break;
+ case BIT_SDP_INT:
+ type = SDP_TYPE;
+ break;
+ default:
+ type = UNKNOWN_TYPE;
+ }
+
+ return type;
+}
+
+static inline void sprd_hsphy_enable(struct sprd_hsphy *sprd_phy)
+{
+ u32 reg, msk;
+
+ /* enable usb module */
+ reg = msk = (MASK_AON_APB_OTG_UTMI_EB | MASK_AON_APB_ANA_EB);
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_APB_EB1, msk, reg);
+ reg = msk = MASK_AON_APB_CGM_OTG_REF_EN |
+ MASK_AON_APB_CGM_DPHY_REF_EN;
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_CGM_REG1, msk, reg);
+}
+
+static inline void sprd_hsphy_power_down(struct sprd_hsphy *sprd_phy)
+{
+ u32 reg, msk;
+
+ /* usb power down */
+ reg = msk = (MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_L |
+ MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_S);
+ regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_BATTER_PLL, msk, reg);
+}
+
+static inline void sprd_hsphy_reset_core(struct sprd_hsphy *sprd_phy)
+{
+ u32 reg, msk;
+
+ /* Reset PHY */
+ reg = msk = MASK_AON_APB_OTG_PHY_SOFT_RST | MASK_AON_APB_OTG_UTMI_SOFT_RST;
+
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_APB_RST1, msk, reg);
+ /* USB PHY reset need to delay 20ms~30ms */
+ usleep_range(20000, 30000);
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_APB_RST1, msk, 0);
+}
+
+static int sprd_hostphy_set(struct usb_phy *u_phy, int on)
+{
+ struct sprd_hsphy *sprd_phy = container_of(u_phy, struct sprd_hsphy, phy);
+ u32 reg, msk;
+ int ret = 0;
+
+ if (on) {
+ msk = MASK_AON_APB_USB2_PHY_IDDIG;
+ ret |= regmap_update_bits(sprd_phy->hsphy_glb,
+ REG_AON_APB_OTG_PHY_CTRL, msk, 0);
+
+ msk = MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DMPULLDOWN |
+ MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DPPULLDOWN;
+ ret |= regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_REG_SEL_CFG_0,
+ msk, msk);
+
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DMPULLDOWN |
+ MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DPPULLDOWN;
+ ret |= regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL2,
+ msk, msk);
+
+ reg = 0x200;
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_RESERVED;
+ ret |= regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1,
+ msk, reg);
+ sprd_phy->is_host = true;
+ } else {
+ reg = msk = MASK_AON_APB_USB2_PHY_IDDIG;
+ ret |= regmap_update_bits(sprd_phy->hsphy_glb,
+ REG_AON_APB_OTG_PHY_CTRL, msk, reg);
+
+ msk = MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DMPULLDOWN |
+ MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DPPULLDOWN;
+ ret |= regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_REG_SEL_CFG_0,
+ msk, msk);
+
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DMPULLDOWN |
+ MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DPPULLDOWN;
+ ret |= regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL2,
+ msk, 0);
+
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_RESERVED;
+ ret |= regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1,
+ msk, 0);
+ sprd_phy->is_host = false;
+ }
+ return ret;
+}
+
+static int sprd_hsphy_init(struct usb_phy *u_phy)
+{
+ struct sprd_hsphy *sprd_phy = container_of(u_phy, struct sprd_hsphy, phy);
+ u32 reg, msk;
+ int ret;
+
+ if (atomic_read(&sprd_phy->inited)) {
+ dev_dbg(u_phy->dev, "%s is already inited!\n", __func__);
+ return 0;
+ }
+
+ /* Turn On VDD */
+ regulator_set_voltage(sprd_phy->vdd, sprd_phy->vdd_vol, sprd_phy->vdd_vol);
+ if (!regulator_is_enabled(sprd_phy->vdd)) {
+ ret = regulator_enable(sprd_phy->vdd);
+ if (ret)
+ return ret;
+ }
+
+ sprd_hsphy_enable(sprd_phy);
+ regmap_update_bits(sprd_phy->ana_g2, REG_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW,
+ MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW_EN, 0);
+
+ /* usb phy power */
+ msk = (MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_L |
+ MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_S);
+ regmap_update_bits(sprd_phy->ana_g2, REG_ANLG_PHY_G2_ANALOG_USB20_USB20_BATTER_PLL,
+ msk, 0);
+
+ /* usb vbus valid */
+ reg = msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_OTG_PHY_TEST, msk, reg);
+
+ reg = msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
+ regmap_update_bits(sprd_phy->ana_g2, REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1,
+ msk, reg);
+
+ /* for SPRD phy utmi_width sel */
+ reg = msk = MASK_AON_APB_UTMI_WIDTH_SEL;
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_OTG_PHY_CTRL, msk, reg);
+
+ reg = msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DATABUS16_8;
+ regmap_update_bits(sprd_phy->ana_g2, REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1,
+ msk, reg);
+
+ reg = TUNEHSAMP_2_6MA;
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TUNEHSAMP;
+ regmap_update_bits(sprd_phy->ana_g2, REG_ANLG_PHY_G2_ANALOG_USB20_USB20_TRIMMING,
+ msk, reg);
+
+ reg = TFREGRES_TUNE_VALUE;
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TFREGRES;
+ regmap_update_bits(sprd_phy->ana_g2, REG_ANLG_PHY_G2_ANALOG_USB20_USB20_TRIMMING,
+ msk, reg);
+
+ if (!atomic_read(&sprd_phy->reset)) {
+ sprd_hsphy_reset_core(sprd_phy);
+ atomic_set(&sprd_phy->reset, 1);
+ }
+
+ atomic_set(&sprd_phy->inited, 1);
+
+ return 0;
+}
+
+static void sprd_hsphy_shutdown(struct usb_phy *u_phy)
+{
+ struct sprd_hsphy *sprd_phy = container_of(u_phy, struct sprd_hsphy, phy);
+ u32 reg, msk;
+
+ if (!atomic_read(&sprd_phy->inited)) {
+ dev_dbg(sprd_phy->dev, "%s is already shut down\n", __func__);
+ return;
+ }
+
+ /* usb vbus */
+ msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_OTG_PHY_TEST, msk, 0);
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
+ regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1, msk, 0);
+
+ sprd_hsphy_power_down(sprd_phy);
+ regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW,
+ msk, reg);
+
+ /* usb cgm ref */
+ msk = MASK_AON_APB_CGM_OTG_REF_EN |
+ MASK_AON_APB_CGM_DPHY_REF_EN;
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_CGM_REG1, msk, 0);
+
+ if (regulator_is_enabled(sprd_phy->vdd))
+ regulator_disable(sprd_phy->vdd);
+
+ atomic_set(&sprd_phy->inited, 0);
+ atomic_set(&sprd_phy->reset, 0);
+}
+
+static ssize_t vdd_voltage_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct sprd_hsphy *sprd_phy = dev_get_drvdata(dev);
+
+ if (!sprd_phy)
+ return -EINVAL;
+
+ return sprintf(buf, "%d\n", sprd_phy->vdd_vol);
+}
+
+static ssize_t vdd_voltage_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct sprd_hsphy *sprd_phy = dev_get_drvdata(dev);
+ u32 vol;
+
+ if (!sprd_phy)
+ return -EINVAL;
+
+ if (kstrtouint(buf, 16, &vol) < 0)
+ return -EINVAL;
+
+ if (vol < 1200000 || vol > 3750000) {
+ dev_err(dev, "Invalid voltage value %d\n", vol);
+ return -EINVAL;
+ }
+ sprd_phy->vdd_vol = vol;
+
+ return size;
+}
+static DEVICE_ATTR_RW(vdd_voltage);
+
+static struct attribute *usb_hsphy_attrs[] = {
+ &dev_attr_vdd_voltage.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(usb_hsphy);
+
+static int sprd_hsphy_vbus_notify(struct notifier_block *nb,
+ unsigned long event, void *data)
+{
+ struct usb_phy *u_phy = container_of(nb, struct usb_phy, vbus_nb);
+ struct sprd_hsphy *sprd_phy = container_of(u_phy, struct sprd_hsphy, phy);
+ u32 reg, msk;
+
+ if (sprd_phy->is_host || u_phy->last_event == USB_EVENT_ID) {
+ dev_info(sprd_phy->dev, "USB PHY is host mode\n");
+ return 0;
+ }
+
+ if (event) {
+ /* usb vbus valid */
+ reg = msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
+ regmap_update_bits(sprd_phy->hsphy_glb,
+ REG_AON_APB_OTG_PHY_TEST, msk, reg);
+
+ reg = msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
+ regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1, msk, reg);
+ usb_phy_set_charger_state(u_phy, USB_CHARGER_PRESENT);
+ } else {
+ /* usb vbus invalid */
+ msk = MASK_AON_APB_OTG_VBUS_VALID_PHYREG;
+ regmap_update_bits(sprd_phy->hsphy_glb, REG_AON_APB_OTG_PHY_TEST,
+ msk, 0);
+ msk = MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT;
+ regmap_update_bits(sprd_phy->ana_g2,
+ REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1, msk, 0);
+ usb_phy_set_charger_state(u_phy, USB_CHARGER_ABSENT);
+ }
+
+ return 0;
+}
+
+static enum usb_charger_type sprd_hsphy_charger_detect(struct usb_phy *u_phy)
+{
+ struct sprd_hsphy *sprd_phy = container_of(u_phy, struct sprd_hsphy, phy);
+
+ return sc27xx_charger_detect(sprd_phy->pmic);
+}
+
+static int sprd_hsphy_probe(struct platform_device *pdev)
+{
+ struct device_node *regmap_np;
+ struct platform_device *regmap_pdev;
+ struct sprd_hsphy *sprd_phy;
+ struct device *dev = &pdev->dev;
+ int ret;
+ struct usb_otg *otg;
+
+ sprd_phy = devm_kzalloc(dev, sizeof(*sprd_phy), GFP_KERNEL);
+ if (!sprd_phy)
+ return -ENOMEM;
+
+ regmap_np = of_find_compatible_node(NULL, NULL, "sprd,sc27xx-syscon");
+ if (!regmap_np) {
+ dev_err(dev, "unable to get syscon node\n");
+ return -ENODEV;
+ }
+
+ regmap_pdev = of_find_device_by_node(regmap_np);
+ if (!regmap_pdev) {
+ dev_err(dev, "unable to get syscon platform device\n");
+ ret = -ENODEV;
+ goto device_node_err;
+ }
+
+ sprd_phy->pmic = dev_get_regmap(regmap_pdev->dev.parent, NULL);
+ if (!sprd_phy->pmic) {
+ dev_err(dev, "unable to get pmic regmap device\n");
+ ret = -ENODEV;
+ goto platform_device_err;
+ }
+
+ ret = of_property_read_u32(dev->of_node, "sprd,vdd-voltage",
+ &sprd_phy->vdd_vol);
+ if (ret < 0) {
+ dev_err(dev, "unable to read ssphy vdd voltage\n");
+ goto platform_device_err;
+ }
+
+ sprd_phy->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(sprd_phy->vdd)) {
+ dev_err(dev, "unable to get ssphy vdd supply\n");
+ ret = PTR_ERR(sprd_phy->vdd);
+ goto platform_device_err;
+ }
+
+ ret = regulator_set_voltage(sprd_phy->vdd, sprd_phy->vdd_vol, sprd_phy->vdd_vol);
+ if (ret < 0) {
+ dev_err(dev, "fail to set ssphy vdd voltage at %dmV\n", sprd_phy->vdd_vol);
+ goto platform_device_err;
+ }
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg) {
+ ret = -ENOMEM;
+ goto platform_device_err;
+ }
+
+ sprd_phy->ana_g2 = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "sprd,syscon-anag2");
+ if (IS_ERR(sprd_phy->ana_g2)) {
+ dev_err(&pdev->dev, "ap USB anag2 syscon failed!\n");
+ ret = PTR_ERR(sprd_phy->ana_g2);
+ goto platform_device_err;
+ }
+
+ sprd_phy->hsphy_glb = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "sprd,syscon-enable");
+ if (IS_ERR(sprd_phy->hsphy_glb)) {
+ dev_err(&pdev->dev, "ap USB aon apb syscon failed!\n");
+ ret = PTR_ERR(sprd_phy->hsphy_glb);
+ goto platform_device_err;
+ }
+
+ sprd_hsphy_enable(sprd_phy);
+
+ sprd_hsphy_power_down(sprd_phy);
+
+ sprd_phy->phy.dev = dev;
+ sprd_phy->phy.label = "sprd-hsphy";
+ sprd_phy->phy.otg = otg;
+ sprd_phy->phy.init = sprd_hsphy_init;
+ sprd_phy->phy.shutdown = sprd_hsphy_shutdown;
+ sprd_phy->phy.set_vbus = sprd_hostphy_set;
+ sprd_phy->phy.type = USB_PHY_TYPE_USB2;
+ sprd_phy->phy.vbus_nb.notifier_call = sprd_hsphy_vbus_notify;
+ sprd_phy->phy.charger_detect = sprd_hsphy_charger_detect;
+ otg->usb_phy = &sprd_phy->phy;
+
+ platform_set_drvdata(pdev, sprd_phy);
+
+ ret = usb_add_phy_dev(&sprd_phy->phy);
+ if (ret) {
+ dev_err(dev, "fail to add phy\n");
+ goto platform_device_err;
+ }
+
+ ret = sysfs_create_groups(&dev->kobj, usb_hsphy_groups);
+ if (ret)
+ dev_warn(dev, "failed to create usb hsphy attributes\n");
+
+ if (extcon_get_state(sprd_phy->phy.edev, EXTCON_USB) > 0)
+ usb_phy_set_charger_state(&sprd_phy->phy, USB_CHARGER_PRESENT);
+
+ dev_info(dev, "sprd usb phy probe ok !\n");
+
+platform_device_err:
+device_node_err:
+ of_node_put(regmap_np);
+
+ return ret;
+}
+
+static int sprd_hsphy_remove(struct platform_device *pdev)
+{
+ struct sprd_hsphy *sprd_phy = platform_get_drvdata(pdev);
+
+ sysfs_remove_groups(&pdev->dev.kobj, usb_hsphy_groups);
+ usb_remove_phy(&sprd_phy->phy);
+ if (regulator_is_enabled(sprd_phy->vdd))
+ regulator_disable(sprd_phy->vdd);
+
+ return 0;
+}
+
+static const struct of_device_id sprd_hsphy_match[] = {
+ { .compatible = "sprd,ums512-phy"},
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, sprd_hsphy_match);
+
+static struct platform_driver sprd_hsphy_driver = {
+ .probe = sprd_hsphy_probe,
+ .remove = sprd_hsphy_remove,
+ .driver = {
+ .name = "sprd-hsphy",
+ .of_match_table = sprd_hsphy_match,
+ },
+};
+
+static int __init sprd_hsphy_driver_init(void)
+{
+ return platform_driver_register(&sprd_hsphy_driver);
+}
+
+static void __exit sprd_hsphy_driver_exit(void)
+{
+ platform_driver_unregister(&sprd_hsphy_driver);
+}
+
+late_initcall(sprd_hsphy_driver_init);
+module_exit(sprd_hsphy_driver_exit);
+
+MODULE_DESCRIPTION("UNISOC USB PHY driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/phy/phy-sprd-ums512.h b/drivers/usb/phy/phy-sprd-ums512.h
new file mode 100644
index 000000000000..903da0573eae
--- /dev/null
+++ b/drivers/usb/phy/phy-sprd-ums512.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0+ OR MIT */
+/*
+ * Spreadtrum UMS512 SOC USB registers file
+ *
+ * Copyright C 2022, Spreadtrum Communications Inc.
+ */
+
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DATABUS16_8 0x10000000
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DMPULLDOWN 0x8
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_DPPULLDOWN 0x10
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW_EN 0x1
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_L 0x8
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_PS_PD_S 0x10
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_RESERVED 0xffff
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TFREGRES 0x1f80000
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_TUNEHSAMP 0x6000000
+#define MASK_ANLG_PHY_G2_ANALOG_USB20_USB20_VBUSVLDEXT 0x10000
+#define MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DMPULLDOWN 0x2
+#define MASK_ANLG_PHY_G2_DBG_SEL_ANALOG_USB20_USB20_DPPULLDOWN 0x4
+#define MASK_AON_APB_ANA_EB 0x1000
+#define MASK_AON_APB_CGM_DPHY_REF_EN 0x400
+#define MASK_AON_APB_CGM_OTG_REF_EN 0x1000
+#define MASK_AON_APB_OTG_PHY_SOFT_RST 0x200
+#define MASK_AON_APB_OTG_UTMI_EB 0x100
+#define MASK_AON_APB_OTG_UTMI_SOFT_RST 0x100
+#define MASK_AON_APB_OTG_VBUS_VALID_PHYREG 0x1000000
+#define MASK_AON_APB_USB2_PHY_IDDIG 0x8
+#define MASK_AON_APB_UTMI_WIDTH_SEL 0x40000000
+#define REG_ANLG_PHY_G2_ANALOG_USB20_USB20_BATTER_PLL 0x005c
+#define REG_ANLG_PHY_G2_ANALOG_USB20_USB20_ISO_SW 0x0070
+#define REG_ANLG_PHY_G2_ANALOG_USB20_USB20_TRIMMING 0x0064
+#define REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL1 0x0058
+#define REG_ANLG_PHY_G2_ANALOG_USB20_USB20_UTMI_CTL2 0x0060
+#define REG_ANLG_PHY_G2_ANALOG_USB20_REG_SEL_CFG_0 0x0074
+#define REG_AON_APB_APB_EB1 0x0004
+#define REG_AON_APB_APB_RST1 0x0010
+#define REG_AON_APB_CGM_REG1 0x0138
+#define REG_AON_APB_OTG_PHY_CTRL 0x0208
+#define REG_AON_APB_OTG_PHY_TEST 0x0204
--
2.34.1