Re: [PATCH v3 2/2] gpio: fxl6408: add I2C GPIO expander driver

[Francesco Dolcini]

On Mon, Mar 13, 2023 at 07:35:20PM +0200, Andy Shevchenko wrote:
> On Mon, Mar 13, 2023 at 7:09 PM Francesco Dolcini <francesco@xxxxxxxxxx> wrote:
> >
> > From: Emanuele Ghidoli <emanuele.ghidoli@xxxxxxxxxxx>
> >
> > Add minimal driver for Fairchild FXL6408 8-bit I2C-controlled GPIO expander
> > using the generic regmap based GPIO driver (GPIO_REGMAP).
> >
> > The driver implements setting the GPIO direction, reading inputs
> > and writing outputs.
> >
> > In addition to that the FXL6408 has the following functionalities:
> > - allows to monitor input ports for data transitions with an interrupt pin
> > - all inputs can be configured with pull-up or pull-down resistors
> 
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

Thanks for the review, appreciated.

> > +#include <linux/err.h>
> > +#include <linux/gpio/regmap.h>
> > +#include <linux/kernel.h>
> > +#include <linux/i2c.h>
> 
> Seems unordered?

Whoops :-/

Bartosz: if you or others have additional comments I'll change this for
sure, if not up to you - please let me know.

Francesco