[PATCH v2 18/23] arm64: dts: colibri-imx8x: Move gpio-keys to som level
From: Philippe Schenker
Date: Tue Mar 14 2023 - 06:26:48 EST
From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
SODIMM_45 that is connected to "&lsio_gpio3 10" is defined in the
Colibri standard to be a wakeup pin.
Move this to the SoM level device-tree and keep it disabled by default
but do enable it again on the carrier-board.
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
---
(no changes since v1)
.../dts/freescale/imx8x-colibri-eval-v3.dtsi | 16 +++-------------
arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 15 +++++++++++++++
2 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index 14d479b50656..7264d784ae72 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -17,20 +17,10 @@ clk16m: clock-16mhz {
#clock-cells = <0>;
clock-frequency = <16000000>;
};
+};
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpiokeys>;
-
- key-wakeup {
- label = "Wake-Up";
- gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
- linux,code = <KEY_WAKEUP>;
- debounce-interval = <10>;
- wakeup-source;
- };
- };
+&colibri_gpio_keys {
+ status = "okay";
};
&i2c1 {
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index 1e41965e2d01..ff5ad88febc8 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -8,6 +8,21 @@ chosen {
stdout-path = &lpuart3;
};
+ colibri_gpio_keys: gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiokeys>;
+ status = "disabled";
+
+ key-wakeup {
+ debounce-interval = <10>;
+ gpios = <&lsio_gpio3 10 GPIO_ACTIVE_HIGH>;
+ label = "Wake-Up";
+ linux,code = <KEY_WAKEUP>;
+ wakeup-source;
+ };
+ };
+
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-name = "+V3.3";
--
2.39.2