[PATCH 5/5] arm64: dts: qcom: sdm630: move DSI opp-table into DSI node

[Krzysztof Kozlowski]

The soc node is supposed to have only device nodes with MMIO addresses,
so move the DSI OPP into the DSI controller node to fix:

  sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'}
    From schema: dtschema/schemas/simple-bus.yaml

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 38 ++++++++++++++--------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 5add1951d963..ef63aa86ad67 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1450,25 +1450,6 @@ mmcc: clock-controller@c8c0000 {
 					<0>;
 		};
 
-		dsi_opp_table: opp-table-dsi {
-			compatible = "operating-points-v2";
-
-			opp-131250000 {
-				opp-hz = /bits/ 64 <131250000>;
-				required-opps = <&rpmpd_opp_svs>;
-			};
-
-			opp-210000000 {
-				opp-hz = /bits/ 64 <210000000>;
-				required-opps = <&rpmpd_opp_svs_plus>;
-			};
-
-			opp-262500000 {
-				opp-hz = /bits/ 64 <262500000>;
-				required-opps = <&rpmpd_opp_nom>;
-			};
-		};
-
 		mdss: display-subsystem@c900000 {
 			compatible = "qcom,mdss";
 			reg = <0x0c900000 0x1000>,
@@ -1610,6 +1591,25 @@ dsi0: dsi@c994000 {
 
 				status = "disabled";
 
+				dsi_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-131250000 {
+						opp-hz = /bits/ 64 <131250000>;
+						required-opps = <&rpmpd_opp_svs>;
+					};
+
+					opp-210000000 {
+						opp-hz = /bits/ 64 <210000000>;
+						required-opps = <&rpmpd_opp_svs_plus>;
+					};
+
+					opp-262500000 {
+						opp-hz = /bits/ 64 <262500000>;
+						required-opps = <&rpmpd_opp_nom>;
+					};
+				};
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
-- 
2.34.1