Re: [PATCH 5/5] arm64: dts: qcom: sdm630: move DSI opp-table into DSI node

[Konrad Dybcio]

On 24.03.2023 21:22, Krzysztof Kozlowski wrote:
> The soc node is supposed to have only device nodes with MMIO addresses,
> so move the DSI OPP into the DSI controller node to fix:
> 
>   sda660-inforce-ifc6560.dtb: soc: opp-table-dsi: {'compatible': ['operating-points-v2'], ... should not be valid under {'type': 'object'}
>     From schema: dtschema/schemas/simple-bus.yaml
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Nit: you also changed its node name and didn't mention that, but I
don't see that as anything major so it's gtg as-is

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/sdm630.dtsi | 38 ++++++++++++++--------------
>  1 file changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> index 5add1951d963..ef63aa86ad67 100644
> --- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -1450,25 +1450,6 @@ mmcc: clock-controller@c8c0000 {
>  					<0>;
>  		};
>  
> -		dsi_opp_table: opp-table-dsi {
> -			compatible = "operating-points-v2";
> -
> -			opp-131250000 {
> -				opp-hz = /bits/ 64 <131250000>;
> -				required-opps = <&rpmpd_opp_svs>;
> -			};
> -
> -			opp-210000000 {
> -				opp-hz = /bits/ 64 <210000000>;
> -				required-opps = <&rpmpd_opp_svs_plus>;
> -			};
> -
> -			opp-262500000 {
> -				opp-hz = /bits/ 64 <262500000>;
> -				required-opps = <&rpmpd_opp_nom>;
> -			};
> -		};
> -
>  		mdss: display-subsystem@c900000 {
>  			compatible = "qcom,mdss";
>  			reg = <0x0c900000 0x1000>,
> @@ -1610,6 +1591,25 @@ dsi0: dsi@c994000 {
>  
>  				status = "disabled";
>  
> +				dsi_opp_table: opp-table {
> +					compatible = "operating-points-v2";
> +
> +					opp-131250000 {
> +						opp-hz = /bits/ 64 <131250000>;
> +						required-opps = <&rpmpd_opp_svs>;
> +					};
> +
> +					opp-210000000 {
> +						opp-hz = /bits/ 64 <210000000>;
> +						required-opps = <&rpmpd_opp_svs_plus>;
> +					};
> +
> +					opp-262500000 {
> +						opp-hz = /bits/ 64 <262500000>;
> +						required-opps = <&rpmpd_opp_nom>;
> +					};
> +				};
> +
>  				ports {
>  					#address-cells = <1>;
>  					#size-cells = <0>;