[PATCH v2 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Add the GPU IOMMU for sa8775p-based platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 36 +++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index f799cb5abb87..f46c1a73abdb 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
+#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
 #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -605,6 +606,41 @@ gpucc: clock-controller@3d90000 {
 			#power-domain-cells = <1>;
 		};
 
+		kgsl_smmu: iommu@3da0000 {
+			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
+			reg = <0x0 0x03da0000 0x0 0x20000>;
+			#iommu-cells = <2>;
+			#global-interrupts = <2>;
+			dma-coherent;
+			power-domains = <&gpucc GPU_CC_CX_GDSC>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
+				 <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
+				 <&gpucc GPU_CC_HUB_AON_CLK>;
+			clock-names = "gcc_gpu_memnoc_gfx_clk",
+				      "gcc_gpu_snoc_dvm_gfx_clk",
+				      "gpu_cc_ahb_clk",
+				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
+				      "gpu_cc_cx_gmu_clk",
+				      "gpu_cc_hub_cx_int_clk",
+				      "gpu_cc_hub_aon_clk";
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
-- 
2.37.2