Re: [PATCH v2 7/7] arm64: dts: qcom: sa8775p: add the GPU IOMMU node

[Konrad Dybcio]

On 6.04.2023 22:07, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> 
> Add the GPU IOMMU for sa8775p-based platforms.
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sa8775p.dtsi | 36 +++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> index f799cb5abb87..f46c1a73abdb 100644
> --- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
> @@ -7,6 +7,7 @@
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
> +#include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
>  #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
>  #include <dt-bindings/power/qcom-rpmpd.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
> @@ -605,6 +606,41 @@ gpucc: clock-controller@3d90000 {
>  			#power-domain-cells = <1>;
>  		};
>  
> +		kgsl_smmu: iommu@3da0000 {
> +			compatible = "qcom,sa8775p-smmu-500", "qcom,smmu-500", "arm,mmu-500";
No "qcom,adreno"? Does this one not support per-process pagetables?
Do you have a working GPU setup to confirm that?

Konrad
> +			reg = <0x0 0x03da0000 0x0 0x20000>;
> +			#iommu-cells = <2>;
> +			#global-interrupts = <2>;
> +			dma-coherent;
> +			power-domains = <&gpucc GPU_CC_CX_GDSC>;
> +			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
> +				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
> +				 <&gpucc GPU_CC_AHB_CLK>,
> +				 <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
> +				 <&gpucc GPU_CC_CX_GMU_CLK>,
> +				 <&gpucc GPU_CC_HUB_CX_INT_CLK>,
> +				 <&gpucc GPU_CC_HUB_AON_CLK>;
> +			clock-names = "gcc_gpu_memnoc_gfx_clk",
> +				      "gcc_gpu_snoc_dvm_gfx_clk",
> +				      "gpu_cc_ahb_clk",
> +				      "gpu_cc_hlos1_vote_gpu_smmu_clk",
> +				      "gpu_cc_cx_gmu_clk",
> +				      "gpu_cc_hub_cx_int_clk",
> +				      "gpu_cc_hub_aon_clk";
> +			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
>  		pdc: interrupt-controller@b220000 {
>  			compatible = "qcom,sa8775p-pdc", "qcom,pdc";
>  			reg = <0x0 0x0b220000 0x0 0x30000>,