Re: [RFC PATCH 2/2] usb: dwc3: Support 'snps,gadget-keep-connect-sys-sleep' feature

[Thinh Nguyen]

On Wed, Apr 12, 2023, Roger Quadros wrote:
> 
> 
> On 06/04/2023 04:38, Thinh Nguyen wrote:
> > On Wed, Apr 05, 2023, Roger Quadros wrote:
> >>
> >>
> >> On 05/04/2023 00:53, Thinh Nguyen wrote:
> >>>
> >>> I may have misunderstood your platform implementation. My understanding
> >>> is that it can only detect VBUS and that it can only resume on VBUS
> >>> valid.
> >>>
> >>> Does the "LINESTATE" here gets asserted if say there's a LFPS detection?
> >>
> >> Yes. The wake up logic on the SoC is snooping the UTMI lines from the PHY and on any
> >> change it can detect and wake up the SoC.
> >>
> > 
> > Are you referring to the utmi_linestate signal? Isn't that for usb2
> > speed only? Does your platform support usb3 speed?
> 
> The wake-up on deepSleep feature is only supported for USB2 on this particular SoC.
> 

I mean can your platform operate in usb3 speed. If that's the case, then
how do you plan to handle it here.

Also, when you tested this in highspeed, did you observe successful
resume? Or did the host have to perform a port reset?

Thanks,
Thinh