Re: [RFC PATCH 2/2] usb: dwc3: Support 'snps,gadget-keep-connect-sys-sleep' feature

[Roger Quadros]

On 12/04/2023 23:59, Thinh Nguyen wrote:
> On Wed, Apr 12, 2023, Roger Quadros wrote:
>>
>>
>> On 06/04/2023 04:38, Thinh Nguyen wrote:
>>> On Wed, Apr 05, 2023, Roger Quadros wrote:
>>>>
>>>>
>>>> On 05/04/2023 00:53, Thinh Nguyen wrote:
>>>>>
>>>>> I may have misunderstood your platform implementation. My understanding
>>>>> is that it can only detect VBUS and that it can only resume on VBUS
>>>>> valid.
>>>>>
>>>>> Does the "LINESTATE" here gets asserted if say there's a LFPS detection?
>>>>
>>>> Yes. The wake up logic on the SoC is snooping the UTMI lines from the PHY and on any
>>>> change it can detect and wake up the SoC.
>>>>
>>>
>>> Are you referring to the utmi_linestate signal? Isn't that for usb2
>>> speed only? Does your platform support usb3 speed?
>>
>> The wake-up on deepSleep feature is only supported for USB2 on this particular SoC.
>>
> 
> I mean can your platform operate in usb3 speed. If that's the case, then
> how do you plan to handle it here.

No, this SoC can only support up to USB2 speed.

> 
> Also, when you tested this in highspeed, did you observe successful
> resume? Or did the host have to perform a port reset?

I definitely didn't see a disconnect. Not sure about port reset.
I will check and get back.

cheers,
-roger