[PATCH v2 3/4] dt-bindings: clock: Add gate-clock

[David Yang]

Add DT bindings documentation for gate-clock, which can gate its output.

Signed-off-by: David Yang <mmyangfl@xxxxxxxxx>
---
 .../devicetree/bindings/clock/gate-clock.yaml | 58 +++++++++++++++++++
 1 file changed, 58 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/gate-clock.yaml

diff --git a/Documentation/devicetree/bindings/clock/gate-clock.yaml b/Documentation/devicetree/bindings/clock/gate-clock.yaml
new file mode 100644
index 000000000000..3c993cb7e9bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/gate-clock.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/gate-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Clock which can gate its output
+
+maintainers:
+  - David Yang <mmyangfl@xxxxxxxxx>
+
+description: |
+  Clock which can gate its output.
+
+  The registers map is retrieved from the parental dt-node. So the clock node
+  should be represented as a sub-node of a "clock-controller" node.
+
+  See also: linux/clk-provider.h
+
+properties:
+  compatible:
+    const: gate-clock
+
+  '#clock-cells':
+    const: 0
+
+  clocks:
+    maxItems: 1
+    description: Parent clock.
+
+  offset:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Offset in the register map for the control register (in bytes).
+
+  bits:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Bit index which controls the output.
+
+  clock-output-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - '#clock-cells'
+  - offset
+  - bits
+
+additionalProperties: false
+
+examples:
+  - |
+    gate-clock@cc.3 {
+      compatible = "gate-clock";
+      #clock-cells = <0>;
+      offset = <0xcc>;
+      bits = <3>;
+      clock-output-names = "my-clk";
+    };
-- 
2.39.2