Re: [PATCH 1/2 v8] dt-bindings: watchdog: marvell GTI system watchdog driver

[Conor Dooley]

Yo Bharat,

On Fri, May 26, 2023 at 11:56:25AM +0530, Bharat Bhushan wrote:
> Add binding documentation for the Marvell GTI system
> watchdog driver.
> 
> Signed-off-by: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> ---
> v8:
>   - Compatible name as per soc name

I am sorry, but I do not understand this.

> 
>  .../watchdog/marvell,octeontx2-wdt.yaml       | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yaml
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yaml b/Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yaml
> new file mode 100644
> index 000000000000..3c642359d960
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/marvell,octeontx2-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Marvell Global Timer (GTI) system watchdog
> +
> +allOf:
> +  - $ref: watchdog.yaml#

From v7:
Put allOf after maintainers:.

> +
> +maintainers:
> +  - Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - marvell,cn9670-wdt
> +      - marvell,cn9880-wdt
> +      - marvell,cnf9535-wdt
> +      - marvell,cn10624-wdt
> +      - marvell,cn10308-wdt
> +      - marvell,cnf10518-wdt

static const struct of_device_id gti_wdt_of_match[] = {
       { .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
       { .compatible = "marvell,cn9880-wdt", .data = &match_data_octeontx2},
       { .compatible = "marvell,cnf9535-wdt", .data = &match_data_octeontx2},
       { .compatible = "marvell,cn10624-wdt", .data = &match_data_cn10k},
       { .compatible = "marvell,cn10308-wdt", .data = &match_data_cn10k},
       { .compatible = "marvell,cnf10518-wdt", .data = &match_data_cn10k},

This is a fat hint that you should be using fallback compatibles here.
You even had a fallback setup in your last revision, but you seem to
have removed it alongside the removal of the wildcards. Why did you do
that?

> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1

From v7:
maxItems instead. You see it is different than above properties?

> +
> +  clock-names:
> +    minItems: 1

From v7:
Need to define names.

Cheers,
Conor.

Attachment: signature.asc
Description: PGP signature