RE: [EXT] Re: [PATCH 1/2 v8] dt-bindings: watchdog: marvell GTI system watchdog driver

[Bharat Bhushan]

Hi Conor,

Please see inline 

> -----Original Message-----
> From: Conor Dooley <conor@xxxxxxxxxx>
> Sent: Saturday, May 27, 2023 1:07 AM
> To: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> Cc: wim@xxxxxxxxxxxxxxxxxx; linux@xxxxxxxxxxxx; robh+dt@xxxxxxxxxx;
> krzysztof.kozlowski+dt@xxxxxxxxxx; linux-watchdog@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Sunil Kovvuri
> Goutham <sgoutham@xxxxxxxxxxx>
> Subject: [EXT] Re: [PATCH 1/2 v8] dt-bindings: watchdog: marvell GTI system
> watchdog driver
> 
> External Email
> 
> ----------------------------------------------------------------------
> Yo Bharat,
> 
> On Fri, May 26, 2023 at 11:56:25AM +0530, Bharat Bhushan wrote:
> > Add binding documentation for the Marvell GTI system watchdog driver.
> >
> > Signed-off-by: Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> > ---
> > v8:
> >   - Compatible name as per soc name
> 
> I am sorry, but I do not understand this.

I mean to say replaced soc family name from compatible with actual soc names

> 
> >
> >  .../watchdog/marvell,octeontx2-wdt.yaml       | 73 +++++++++++++++++++
> >  1 file changed, 73 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yam
> > l
> > b/Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt.yam
> > l
> > new file mode 100644
> > index 000000000000..3c642359d960
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/watchdog/marvell,octeontx2-wdt
> > +++ .yaml
> > @@ -0,0 +1,73 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devicetree.org/schemas/watchdog/marvell,octeontx2-wdt.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Marvell Global Timer (GTI) system watchdog
> > +
> > +allOf:
> > +  - $ref: watchdog.yaml#
> 
> From v7:
> Put allOf after maintainers:.

Thanks for pointing, I am sorry, missed almost all comments on v7. Will resolve this and below as well in next version

> 
> > +
> > +maintainers:
> > +  - Bharat Bhushan <bbhushan2@xxxxxxxxxxx>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - marvell,cn9670-wdt
> > +      - marvell,cn9880-wdt
> > +      - marvell,cnf9535-wdt
> > +      - marvell,cn10624-wdt
> > +      - marvell,cn10308-wdt
> > +      - marvell,cnf10518-wdt
> 
> static const struct of_device_id gti_wdt_of_match[] = {
>        { .compatible = "marvell,cn9670-wdt", .data = &match_data_octeontx2},
>        { .compatible = "marvell,cn9880-wdt", .data = &match_data_octeontx2},
>        { .compatible = "marvell,cnf9535-wdt", .data = &match_data_octeontx2},
>        { .compatible = "marvell,cn10624-wdt", .data = &match_data_cn10k},
>        { .compatible = "marvell,cn10308-wdt", .data = &match_data_cn10k},
>        { .compatible = "marvell,cnf10518-wdt", .data = &match_data_cn10k},
> 
> This is a fat hint that you should be using fallback compatibles here.
> You even had a fallback setup in your last revision, but you seem to have
> removed it alongside the removal of the wildcards. Why did you do that?

Not sure I understand this comment, Compatible in last version was as below:

+ properties:
+ compatible:
+    oneOf:
+      - const: marvell,octeontx2-wdt
+      - items:
+          - enum:
+              - marvell,octeontx2-95xx-wdt
+              - marvell,octeontx2-96xx-wdt
+              - marvell,octeontx2-98xx-wdt
+          - const: marvell,octeontx2-wdt
+      - const: marvell,cn10k-wdt
+      - items:
+          - enum:
+              - marvell,cn10kx-wdt
+              - marvell,cnf10kx-wdt
+          - const: marvell,cn10k-wdt

By fallback do you mean " const: marvell,cn10k-wdt" and " const: marvell,octeontx2-wdt" ? If yes I removed because "octeontx2" and "cn10k" are soc family name and no a specific soc.

Thanks
-Bharat

> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    minItems: 1
> 
> From v7:
> maxItems instead. You see it is different than above properties?
> 
> > +
> > +  clock-names:
> > +    minItems: 1
> 
> From v7:
> Need to define names.
> 
> Cheers,
> Conor.