[GIT PULL] thermal for v6.5-rc1

From: Daniel Lezcano
Date: Mon Jun 26 2023 - 11:33:11 EST

Next message: Lee Jones: "Re: [PATCH] mfd: Switch two more drivers back to use struct i2c_driver::probe"
Previous message: Dmitry Osipenko: "Re: [PATCH v13 03/10] drm/shmem-helper: Add pages_pin_count field"
Next in thread: Rafael J. Wysocki: "Re: [GIT PULL] thermal for v6.5-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Rafael,

please consider the following changes since commit 0bb619f9227aa370330d2b309733d74750705053:

thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures (2023-06-15 18:07:48 +0200)

are available in the Git repository at:

ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/thermal/linux.git tags/thermal-v6.5-rc1

for you to fetch changes up to 57c9eaa4de537e6f08819d9214de502cac5a989c:

thermal/drivers/qcom/temp-alarm: Use dev_err_probe (2023-06-26 12:10:22 +0200)

----------------------------------------------------------------
- Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
Dybcio)

- Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)

- Add DT bindings for QCom ipq9574 (Praveenkumar I)

- Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)

- Allow selecting the bang-bang governor as default (Thierry Reding)

- Refactor and prepare the code to set the scene for RCar Gen4
(Wolfram Sang)

- Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
calibration for the MSM8909 platform (Stephan Gerhold)

- Revert a patch introducing a wrong usage of devm_of_iomap() on the
Mediatek platform (Ricardo Cañuelo)

- Fix the clock vs reset ordering in order to conform to the
documentation on the sun8i (Christophe JAILLET)

- Prevent setting up undocumented registers, enable the only described
sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)

- Add DT bindings and support for the Armada AP807 (Alex Leibovich)

- Update the mlx5 driver with the recent thermal changes (Daniel
Lezcano)

- Convert to platform remove callback returning void on STM32 (Uwe
Kleine-König)

- Add an error information printing for devm_thermal_add_hwmon_sysfs()
and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
Qoriq, Mediateka and QCom (Yangtao Li)

- Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)

- Use the dev_err_probe() function in the QCom tsens alarm driver
(Luca Weiss)

----------------------------------------------------------------
Alex Leibovich (2):
dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
thermal/drivers/armada: Add support for AP807 thermal data

Chen-Yu Tsai (2):
thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors
thermal/drivers/generic-adc: Register thermal zones as hwmon sensors

Christophe JAILLET (1):
thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe()

Daniel Lezcano (1):
net/mlx5: Update the driver with the recent thermal changes

Konrad Dybcio (2):
dt-bindings: thermal: tsens: Add QCM2290
dt-bindings: thermal: tsens: Add compatible for SM6375

Luca Weiss (1):
thermal/drivers/qcom/temp-alarm: Use dev_err_probe

Matti Lehtimäki (2):
dt-bindings: thermal: tsens: Add compatible for MSM8226
thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226

Pankit Garg (1):
thermal/drivers/qoriq: No need to program site adjustment register

Peng Fan (2):
thermal/drivers/qoriq: Only enable supported sensors
thermal/drivers/qoriq: Support version 2.1

Praveenkumar I (1):
dt-bindings: thermal: tsens: Add ipq9574 compatible

Ricardo Cañuelo (1):
Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid resource leak in mtk_thermal_probe"

Stefan Wahren (1):
dt-bindings: thermal: convert bcm2835-thermal bindings to YAML

Stephan Gerhold (6):
thermal/drivers/qcom/tsens: Drop unused legacy structs
thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values
thermal/drivers/qcom/tsens-v0_1: Add mdm9607 correction offsets
dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
thermal/drivers/qcom/tsens-v0_1: Add MSM8909 data

Thierry Reding (1):
thermal: Allow selecting the bang-bang governor as default

Uwe Kleine-König (1):
thermal/drivers/stm32: Convert to platform remove callback returning void

Wolfram Sang (3):
drivers/thermal/rcar_gen3_thermal: introduce 'info' structure
drivers/thermal/rcar_gen3_thermal: refactor reading fuses into seprarate function
drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4

Yangtao Li (10):
thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs()
thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe()
thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe()
drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel()
thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone()
thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor()
thermal/drivers/qcom: Remove redundant msg at probe time
thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start()

.../devicetree/bindings/thermal/armada-thermal.txt | 1 +
.../bindings/thermal/brcm,bcm2835-thermal.txt | 41 ------
.../bindings/thermal/brcm,bcm2835-thermal.yaml | 48 +++++++
.../devicetree/bindings/thermal/qcom-tsens.yaml | 32 ++---
drivers/net/ethernet/mellanox/mlx5/core/thermal.c | 15 ++-
drivers/thermal/Kconfig | 8 ++
drivers/thermal/amlogic_thermal.c | 3 +-
drivers/thermal/armada_thermal.c | 32 ++++-
drivers/thermal/imx8mm_thermal.c | 3 +-
drivers/thermal/imx_sc_thermal.c | 3 +-
drivers/thermal/k3_bandgap.c | 3 +-
drivers/thermal/mediatek/auxadc_thermal.c | 14 +-
drivers/thermal/mediatek/lvts_thermal.c | 4 +
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 4 +-
drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 38 +++---
drivers/thermal/qcom/tsens-v0_1.c | 126 ++++++++++++------
drivers/thermal/qcom/tsens-v1.c | 22 ----
drivers/thermal/qcom/tsens.c | 26 +++-
drivers/thermal/qcom/tsens.h | 6 +-
drivers/thermal/qoriq_thermal.c | 52 ++++----
drivers/thermal/rcar_gen3_thermal.c | 141 +++++++++++++++------
drivers/thermal/st/st_thermal.c | 4 +-
drivers/thermal/st/st_thermal.h | 2 +-
drivers/thermal/st/st_thermal_memmap.c | 6 +-
drivers/thermal/sun8i_thermal.c | 59 +++------
drivers/thermal/tegra/tegra30-tsensor.c | 3 +-
drivers/thermal/thermal-generic-adc.c | 4 +
drivers/thermal/thermal_core.h | 2 +
drivers/thermal/thermal_hwmon.c | 5 +-
drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 3 +-
30 files changed, 415 insertions(+), 295 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt
create mode 100644 Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.yaml

--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Next message: Lee Jones: "Re: [PATCH] mfd: Switch two more drivers back to use struct i2c_driver::probe"
Previous message: Dmitry Osipenko: "Re: [PATCH v13 03/10] drm/shmem-helper: Add pages_pin_count field"
Next in thread: Rafael J. Wysocki: "Re: [GIT PULL] thermal for v6.5-rc1"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]