Re: [GIT PULL] thermal for v6.5-rc1

[Rafael J. Wysocki]

Hi Daniel,

On Mon, Jun 26, 2023 at 5:33 PM Daniel Lezcano
<daniel.lezcano@xxxxxxxxxx> wrote:
>
> Hi Rafael,
>
> please consider the following changes since commit
> 0bb619f9227aa370330d2b309733d74750705053:
>
>    thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures
> (2023-06-15 18:07:48 +0200)
>
> are available in the Git repository at:
>
>
> ssh://git@xxxxxxxxxxxxxxxxxxx/pub/scm/linux/kernel/git/thermal/linux.git
> tags/thermal-v6.5-rc1
>
> for you to fetch changes up to 57c9eaa4de537e6f08819d9214de502cac5a989c:
>
>    thermal/drivers/qcom/temp-alarm: Use dev_err_probe (2023-06-26
> 12:10:22 +0200)
>
> ----------------------------------------------------------------
> - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad
>    Dybcio)
>
> - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki)
>
> - Add DT bindings for QCom ipq9574 (Praveenkumar I)
>
> - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren)
>
> - Allow selecting the bang-bang governor as default (Thierry Reding)
>
> - Refactor and prepare the code to set the scene for RCar Gen4
>    (Wolfram Sang)
>
> - Cleanup and fixes for the QCom tsens drivers. Add DT bindings and
>    calibration for the MSM8909 platform (Stephan Gerhold)
>
> - Revert a patch introducing a wrong usage of devm_of_iomap() on the
>    Mediatek platform (Ricardo Cañuelo)
>
> - Fix the clock vs reset ordering in order to conform to the
>    documentation on the sun8i (Christophe JAILLET)
>
> - Prevent setting up undocumented registers, enable the only described
>    sensors and add the version 2.1 on the Qoriq sensor (Peng Fan)
>
> - Add DT bindings and support for the Armada AP807 (Alex Leibovich)
>
> - Update the mlx5 driver with the recent thermal changes (Daniel
>    Lezcano)
>
> - Convert to platform remove callback returning void on STM32 (Uwe
>    Kleine-König)
>
> - Add an error information printing for devm_thermal_add_hwmon_sysfs()
>    and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra,
>    Qoriq, Mediateka and QCom (Yangtao Li)
>
> - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai)
>
> - Use the dev_err_probe() function in the QCom tsens alarm driver
>    (Luca Weiss)
>
> ----------------------------------------------------------------
> Alex Leibovich (2):
>        dt-bindings: armada-thermal: Add armada-ap807-thermal compatible
>        thermal/drivers/armada: Add support for AP807 thermal data
>
> Chen-Yu Tsai (2):
>        thermal/drivers/mediatek/lvts_thermal: Register thermal zones as
> hwmon sensors
>        thermal/drivers/generic-adc: Register thermal zones as hwmon sensors
>
> Christophe JAILLET (1):
>        thermal/drivers/sun8i: Fix some error handling paths in
> sun8i_ths_probe()
>
> Daniel Lezcano (1):
>        net/mlx5: Update the driver with the recent thermal changes
>
> Konrad Dybcio (2):
>        dt-bindings: thermal: tsens: Add QCM2290
>        dt-bindings: thermal: tsens: Add compatible for SM6375
>
> Luca Weiss (1):
>        thermal/drivers/qcom/temp-alarm: Use dev_err_probe
>
> Matti Lehtimäki (2):
>        dt-bindings: thermal: tsens: Add compatible for MSM8226
>        thermal/drivers/qcom/tsens-v0_1: Add support for MSM8226
>
> Pankit Garg (1):
>        thermal/drivers/qoriq: No need to program site adjustment register
>
> Peng Fan (2):
>        thermal/drivers/qoriq: Only enable supported sensors
>        thermal/drivers/qoriq: Support version 2.1
>
> Praveenkumar I (1):
>        dt-bindings: thermal: tsens: Add ipq9574 compatible
>
> Ricardo Cañuelo (1):
>        Revert "thermal/drivers/mediatek: Use devm_of_iomap to avoid
> resource leak in mtk_thermal_probe"
>
> Stefan Wahren (1):
>        dt-bindings: thermal: convert bcm2835-thermal bindings to YAML
>
> Stephan Gerhold (6):
>        thermal/drivers/qcom/tsens: Drop unused legacy structs
>        thermal/drivers/qcom/tsens-v0_1: Fix mdm9607 slope values
>        thermal/drivers/qcom/tsens-v0_1: Add mdm9607 correction offsets
>        dt-bindings: thermal: qcom-tsens: Drop redundant compatibles
>        dt-bindings: thermal: qcom-tsens: Add MSM8909 compatible
>        thermal/drivers/qcom/tsens-v0_1: Add MSM8909 data
>
> Thierry Reding (1):
>        thermal: Allow selecting the bang-bang governor as default
>
> Uwe Kleine-König (1):
>        thermal/drivers/stm32: Convert to platform remove callback
> returning void
>
> Wolfram Sang (3):
>        drivers/thermal/rcar_gen3_thermal: introduce 'info' structure
>        drivers/thermal/rcar_gen3_thermal: refactor reading fuses into
> seprarate function
>        drivers/thermal/rcar_gen3_thermal: add reading fuses for Gen4
>
> Yangtao Li (10):
>        thermal/hwmon: Add error information printing for
> devm_thermal_add_hwmon_sysfs()
>        thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register()
>        thermal/drivers/amlogic: Remove redundant msg in
> amlogic_thermal_probe()
>        thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe()
> and imx_sc_thermal_probe()
>        drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe()
>        thermal/drivers/tegra: Remove redundant msg in
> tegra_tsensor_register_channel()
>        thermal/drivers/qoriq: Remove redundant msg in
> qoriq_tmu_register_tmu_zone()
>        thermal/drivers/ti-soc: Remove redundant msg in
> ti_thermal_expose_sensor()
>        thermal/drivers/qcom: Remove redundant msg at probe time
>        thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in
> lvts_ctrl_start()

Pulled and added to the thermal branch of linux-pm.git.

Thanks!