Re: [PATCH] sh: hd64461: fix virq offsets

[John Paul Adrian Glaubitz]

Hi!

On Sun, 2023-07-09 at 14:56 +0200, Artur Rojek wrote:
> On 2023-07-09 14:48, John Paul Adrian Glaubitz wrote:
> > Hi Artur!
> > 
> > On Sun, 2023-07-09 at 14:13 +0200, Artur Rojek wrote:
> > > A recent change to start counting SuperH IRQ #s from 16 breaks support
> > > for the Hitachi HD64461 companion chip.
> > > 
> > > Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
> > > accommodate for the new virq numbering rules.
> > > 
> > > Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")
> > > Signed-off-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
> > > ---
> > >  arch/sh/cchips/Kconfig        | 4 ++--
> > >  arch/sh/include/asm/hd64461.h | 2 +-
> > >  2 files changed, 3 insertions(+), 3 deletions(-)
> > > 
> > > diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
> > > index efde2edb5627..9659a0bc58de 100644
> > > --- a/arch/sh/cchips/Kconfig
> > > +++ b/arch/sh/cchips/Kconfig
> > > @@ -29,9 +29,9 @@ endchoice
> > >  config HD64461_IRQ
> > >  	int "HD64461 IRQ"
> > >  	depends on HD64461
> > > -	default "36"
> > > +	default "52"
> > >  	help
> > > -	  The default setting of the HD64461 IRQ is 36.
> > > +	  The default setting of the HD64461 IRQ is 52.
> > > 
> > >  	  Do not change this unless you know what you are doing.
> > > 
> > > diff --git a/arch/sh/include/asm/hd64461.h 
> > > b/arch/sh/include/asm/hd64461.h
> > > index afb24cb034b1..6d85db6cf54b 100644
> > > --- a/arch/sh/include/asm/hd64461.h
> > > +++ b/arch/sh/include/asm/hd64461.h
> > > @@ -229,7 +229,7 @@
> > >  #define	HD64461_NIMR		HD64461_IO_OFFSET(0x5002)
> > > 
> > >  #define	HD64461_IRQBASE		OFFCHIP_IRQ_BASE
> > > -#define	OFFCHIP_IRQ_BASE	64
> > > +#define	OFFCHIP_IRQ_BASE	80
> > >  #define	HD64461_IRQ_NUM		16
> > > 
> > >  #define	HD64461_IRQ_UART	(HD64461_IRQBASE+5)
> > 
> > I think it would be better to write this as (64 + 16) for consistency
> > with the other changes made by Sergey.
>
> Sure, I will send v2 with this change, although the same can't be
> applied to HD64461_IRQ value above, so some inconsistency will exist
> either way.
> 

That's okay, that's the user-facing part ;-).

Btw, did you verify that the default assigned IRQ is actually changed from
36 to 52 when the machine boots?

Adrian

-- 
 .''`.  John Paul Adrian Glaubitz
: :' :  Debian Developer
`. `'   Physicist
  `-    GPG: 62FF 8A75 84E0 2956 9546  0006 7426 3B37 F5B5 F913