Re: [PATCH v1 1/3] wifi: brcm80211: drop struct brcmf_p2p_scan_le

[Petr Tesarik]

On 8/1/2023 5:36 PM, Petr Tesarik wrote:
> From: Petr Tesarik <petr.tesarik.ext@xxxxxxxxxx>
> 
> The 'S' scan method is not implemented. The type member is always written
> as 'E' and never read. Consequently, struct brcmf_p2p_scan_le can be
> replaced with struct brcmf_escan_params_le.

Seeing that Hans has already fixed the actual issue with the flex array,
this whole series is not needed.

But maybe this simplification has some value on its own?

Petr T

> Signed-off-by: Petr Tesarik <petr.tesarik.ext@xxxxxxxxxx>
> ---
>  .../broadcom/brcm80211/brcmfmac/p2p.c         | 38 ++++---------------
>  1 file changed, 8 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> index d4492d02e4ea..915f95760470 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> @@ -123,23 +123,6 @@ enum brcmf_p2p_disc_state {
>  	WL_P2P_DISC_ST_SEARCH
>  };
>  
> -/**
> - * struct brcmf_p2p_scan_le - P2P specific scan request.
> - *
> - * @type: type of scan method requested (values: 'E' or 'S').
> - * @reserved: reserved (ignored).
> - * @eparams: parameters used for type 'E'.
> - * @sparams: parameters used for type 'S'.
> - */
> -struct brcmf_p2p_scan_le {
> -	u8 type;
> -	u8 reserved[3];
> -	union {
> -		struct brcmf_escan_params_le eparams;
> -		struct brcmf_scan_params_le sparams;
> -	};
> -};
> -
>  /**
>   * struct brcmf_p2p_pub_act_frame - WiFi P2P Public Action Frame
>   *
> @@ -646,14 +629,14 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
>  {
>  	struct brcmf_pub *drvr = p2p->cfg->pub;
>  	s32 ret = 0;
> -	s32 memsize = offsetof(struct brcmf_p2p_scan_le,
> -			       eparams.params_le.channel_list);
> +	s32 memsize = offsetof(struct brcmf_escan_params_le,
> +			       params_le.channel_list);
>  	s32 nprobes;
>  	s32 active;
>  	u32 i;
>  	u8 *memblk;
>  	struct brcmf_cfg80211_vif *vif;
> -	struct brcmf_p2p_scan_le *p2p_params;
> +	struct brcmf_escan_params_le *eparams;
>  	struct brcmf_scan_params_le *sparams;
>  
>  	memsize += num_chans * sizeof(__le16);
> @@ -667,8 +650,8 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
>  		ret = -EINVAL;
>  		goto exit;
>  	}
> -	p2p_params = (struct brcmf_p2p_scan_le *)memblk;
> -	sparams = &p2p_params->eparams.params_le;
> +	eparams = (struct brcmf_escan_params_le *)memblk;
> +	sparams = &eparams->params_le;
>  
>  	switch (search_state) {
>  	case WL_P2P_DISC_ST_SEARCH:
> @@ -698,11 +681,6 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
>  
>  	brcmf_p2p_set_discover_state(vif->ifp, search_state, 0, 0);
>  
> -	/*
> -	 * set p2p scan parameters.
> -	 */
> -	p2p_params->type = 'E';
> -
>  	/* determine the scan engine parameters */
>  	sparams->bss_type = DOT11_BSSTYPE_ANY;
>  	sparams->scan_type = BRCMF_SCANTYPE_ACTIVE;
> @@ -747,9 +725,9 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
>  		sparams->channel_list[i] = cpu_to_le16(chanspecs[i]);
>  
>  	/* set the escan specific parameters */
> -	p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
> -	p2p_params->eparams.action =  cpu_to_le16(WL_ESCAN_ACTION_START);
> -	p2p_params->eparams.sync_id = cpu_to_le16(0x1234);
> +	eparams->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
> +	eparams->action =  cpu_to_le16(WL_ESCAN_ACTION_START);
> +	eparams->sync_id = cpu_to_le16(0x1234);
>  	/* perform p2p scan on primary device */
>  	ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize);
>  	if (!ret)