Re: [PATCH v1 1/3] wifi: brcm80211: drop struct brcmf_p2p_scan_le

[Franky Lin]

On Tue, Aug 1, 2023 at 10:57 AM Petr Tesarik
<petrtesarik@xxxxxxxxxxxxxxx> wrote:
>
> On 8/1/2023 5:36 PM, Petr Tesarik wrote:
> > From: Petr Tesarik <petr.tesarik.ext@xxxxxxxxxx>
> >
> > The 'S' scan method is not implemented. The type member is always written
> > as 'E' and never read. Consequently, struct brcmf_p2p_scan_le can be
> > replaced with struct brcmf_escan_params_le.
>
> Seeing that Hans has already fixed the actual issue with the flex array,
> this whole series is not needed.
>
> But maybe this simplification has some value on its own?

I don't think this change would work.

> Petr T
>
> > Signed-off-by: Petr Tesarik <petr.tesarik.ext@xxxxxxxxxx>
> > ---
> >  .../broadcom/brcm80211/brcmfmac/p2p.c         | 38 ++++---------------
> >  1 file changed, 8 insertions(+), 30 deletions(-)
> >
> > diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> > index d4492d02e4ea..915f95760470 100644
> > --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> > +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
> > @@ -123,23 +123,6 @@ enum brcmf_p2p_disc_state {
> >       WL_P2P_DISC_ST_SEARCH
> >  };
> >
> > -/**
> > - * struct brcmf_p2p_scan_le - P2P specific scan request.
> > - *
> > - * @type: type of scan method requested (values: 'E' or 'S').
> > - * @reserved: reserved (ignored).
> > - * @eparams: parameters used for type 'E'.
> > - * @sparams: parameters used for type 'S'.
> > - */
> > -struct brcmf_p2p_scan_le {
> > -     u8 type;
> > -     u8 reserved[3];
> > -     union {
> > -             struct brcmf_escan_params_le eparams;
> > -             struct brcmf_scan_params_le sparams;
> > -     };
> > -};
> > -
> >  /**
> >   * struct brcmf_p2p_pub_act_frame - WiFi P2P Public Action Frame
> >   *
> > @@ -646,14 +629,14 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
> >  {
> >       struct brcmf_pub *drvr = p2p->cfg->pub;
> >       s32 ret = 0;
> > -     s32 memsize = offsetof(struct brcmf_p2p_scan_le,
> > -                            eparams.params_le.channel_list);
> > +     s32 memsize = offsetof(struct brcmf_escan_params_le,
> > +                            params_le.channel_list);
> >       s32 nprobes;
> >       s32 active;
> >       u32 i;
> >       u8 *memblk;
> >       struct brcmf_cfg80211_vif *vif;
> > -     struct brcmf_p2p_scan_le *p2p_params;
> > +     struct brcmf_escan_params_le *eparams;
> >       struct brcmf_scan_params_le *sparams;
> >
> >       memsize += num_chans * sizeof(__le16);
> > @@ -667,8 +650,8 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
> >               ret = -EINVAL;
> >               goto exit;
> >       }
> > -     p2p_params = (struct brcmf_p2p_scan_le *)memblk;
> > -     sparams = &p2p_params->eparams.params_le;
> > +     eparams = (struct brcmf_escan_params_le *)memblk;
> > +     sparams = &eparams->params_le;
> >
> >       switch (search_state) {
> >       case WL_P2P_DISC_ST_SEARCH:
> > @@ -698,11 +681,6 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
> >
> >       brcmf_p2p_set_discover_state(vif->ifp, search_state, 0, 0);
> >
> > -     /*
> > -      * set p2p scan parameters.
> > -      */
> > -     p2p_params->type = 'E';
> > -
> >       /* determine the scan engine parameters */
> >       sparams->bss_type = DOT11_BSSTYPE_ANY;
> >       sparams->scan_type = BRCMF_SCANTYPE_ACTIVE;
> > @@ -747,9 +725,9 @@ static s32 brcmf_p2p_escan(struct brcmf_p2p_info *p2p, u32 num_chans,
> >               sparams->channel_list[i] = cpu_to_le16(chanspecs[i]);
> >
> >       /* set the escan specific parameters */
> > -     p2p_params->eparams.version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
> > -     p2p_params->eparams.action =  cpu_to_le16(WL_ESCAN_ACTION_START);
> > -     p2p_params->eparams.sync_id = cpu_to_le16(0x1234);
> > +     eparams->version = cpu_to_le32(BRCMF_ESCAN_REQ_VERSION);
> > +     eparams->action =  cpu_to_le16(WL_ESCAN_ACTION_START);
> > +     eparams->sync_id = cpu_to_le16(0x1234);
> >       /* perform p2p scan on primary device */
> >       ret = brcmf_fil_bsscfg_data_set(vif->ifp, "p2p_scan", memblk, memsize);

Firmware is expecting struct brcmf_p2p_scan_le as the parameter for
"p2p_scan" iovar.

Regards,
- Franky

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature