Re: [PATCH v1 RESEND] usb: dwc3: core: configure TX/RX threshold for DWC3_IP

[Thinh Nguyen]

On Mon, Aug 07, 2023, Stanley Chang wrote:
> In Synopsys's dwc3 data book:
> To avoid underrun and overrun during the burst, in a high-latency bus
> system (like USB), threshold and burst size control is provided through
> GTXTHRCFG and GRXTHRCFG registers.
> 
> In Realtek DHC SoC, DWC3 USB 3.0 uses AHB system bus. When dwc3 is
> connected with USB 2.5G Ethernet, there will be overrun problem.
> Therefore, setting TX/RX thresholds can avoid this issue.
> 
> Signed-off-by: Stanley Chang <stanley_chang@xxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/core.c | 33 +++++++++++++++++++++++++++++++++
>  drivers/usb/dwc3/core.h |  5 +++++
>  2 files changed, 38 insertions(+)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index f6689b731718..a0a54e5c4ad9 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1262,6 +1262,39 @@ static int dwc3_core_init(struct dwc3 *dwc)
>  		}
>  	}
>  
> +	if (DWC3_IP_IS(DWC3)) {
> +		u8 rx_thr_num = dwc->rx_thr_num_pkt_prd;
> +		u8 rx_maxburst = dwc->rx_max_burst_prd;
> +		u8 tx_thr_num = dwc->tx_thr_num_pkt_prd;
> +		u8 tx_maxburst = dwc->tx_max_burst_prd;

These are meant for periodic settings. You're overloading them for
non-periodic settings.

BR,
Thinh

> +
> +		if (rx_thr_num && rx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GRXTHRCFG);
> +			reg |= DWC3_GRXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC3_GRXTHRCFG_RXPKTCNT(~0);
> +			reg |= DWC3_GRXTHRCFG_RXPKTCNT(rx_thr_num);
> +
> +			reg &= ~DWC3_GRXTHRCFG_MAXRXBURSTSIZE(~0);
> +			reg |= DWC3_GRXTHRCFG_MAXRXBURSTSIZE(rx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GRXTHRCFG, reg);
> +		}
> +
> +		if (tx_thr_num && tx_maxburst) {
> +			reg = dwc3_readl(dwc->regs, DWC3_GTXTHRCFG);
> +			reg |= DWC3_GTXTHRCFG_PKTCNTSEL;
> +
> +			reg &= ~DWC3_GTXTHRCFG_TXPKTCNT(~0);
> +			reg |= DWC3_GTXTHRCFG_TXPKTCNT(tx_thr_num);
> +
> +			reg &= ~DWC3_GTXTHRCFG_MAXTXBURSTSIZE(~0);
> +			reg |= DWC3_GTXTHRCFG_MAXTXBURSTSIZE(tx_maxburst);
> +
> +			dwc3_writel(dwc->regs, DWC3_GTXTHRCFG, reg);
> +		}
> +	}
> +
>  	return 0;
>  
>  err_power_off_phy:
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index 8b1295e4dcdd..5480fcb59bcb 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -211,6 +211,11 @@
>  #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24)
>  #define DWC3_GRXTHRCFG_PKTCNTSEL BIT(29)
>  
> +/* Global TX Threshold Configuration Register */
> +#define DWC3_GTXTHRCFG_MAXTXBURSTSIZE(n) (((n) & 0xff) << 16)
> +#define DWC3_GTXTHRCFG_TXPKTCNT(n) (((n) & 0xf) << 24)
> +#define DWC3_GTXTHRCFG_PKTCNTSEL BIT(29)
> +
>  /* Global RX Threshold Configuration Register for DWC_usb31 only */
>  #define DWC31_GRXTHRCFG_MAXRXBURSTSIZE(n)	(((n) & 0x1f) << 16)
>  #define DWC31_GRXTHRCFG_RXPKTCNT(n)		(((n) & 0x1f) << 21)
> -- 
> 2.34.1
>