Re: [PATCH 3/3] arm64: dts: qcom: Add board id for lazor/limozeen

[Krzysztof Kozlowski]

On 02/08/2023 11:57, Sheng-Liang Pan wrote:
> add BRD_ID(0, Z, 0) = 10 for new board with ALC5682i-VS
> 
> Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
> 
>  arch/arm64/boot/dts/qcom/Makefile             |  5 ++
>  ...sc7180-trogdor-lazor-limozeen-nots-r10.dts | 39 +++++++++++++
>  .../sc7180-trogdor-lazor-limozeen-nots-r9.dts |  4 +-
>  .../sc7180-trogdor-lazor-limozeen-r10.dts     | 55 +++++++++++++++++++
>  .../qcom/sc7180-trogdor-lazor-limozeen-r9.dts |  4 +-
>  .../dts/qcom/sc7180-trogdor-lazor-r10-kb.dts  | 33 +++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r10-lte.dts | 37 +++++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r10.dts     | 29 ++++++++++
>  .../dts/qcom/sc7180-trogdor-lazor-r9-kb.dts   |  4 +-
>  .../dts/qcom/sc7180-trogdor-lazor-r9-lte.dts  |  4 +-
>  .../boot/dts/qcom/sc7180-trogdor-lazor-r9.dts |  4 +-
>  11 files changed, 208 insertions(+), 10 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-r10.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-kb.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10-lte.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r10.dts
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 337abc4ceb17..73e745fb1ff0 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -109,11 +109,16 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r3-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-kb.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r9-lte.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10-kb.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-r10-lte.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-r10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r4.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r5.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r9.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-lazor-limozeen-nots-r10.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-parade.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-lte-ti.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-pazquel-parade.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> new file mode 100644
> index 000000000000..63602feceea6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-limozeen-nots-r10.dts
> @@ -0,0 +1,39 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Lazor Limozeen board device tree source
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +/dts-v1/;
> +
> +#include "sc7180.dtsi"
> +#include "sc7180-trogdor-parade-ps8640.dtsi"
> +#include "sc7180-trogdor-lazor.dtsi"
> +#include "sc7180-trogdor-lte-sku.dtsi"
> +
> +/ {
> +	model = "Google Lazor Limozeen without Touchscreen (rev10+, rt5682s)";
> +	compatible = "google,lazor-sku6", "google,lazor-sku18", "qcom,sc7180";
> +};
> +
> +/delete-node/&ap_ts;
> +
> +&panel {
> +	compatible = "edp-panel";
> +};
> +
> +&sdhc_2 {
> +	status = "okay";
> +};
> +
> +&alc5682 {
> +	compatible = "realtek,rt5682s";
> +	realtek,dmic1-clk-pin = <2>;
> +	realtek,dmic-clk-rate-hz = <2048000>;
> +};
> +
> +&sound {

Overrides are ordered by name.

Best regards,
Krzysztof