Re: [PATCH v2 2/3] dt-bindings: display: panel: Add panels based on ILITEK ILI9806E

[Rob Herring]

On Thu, 10 Aug 2023 16:41:15 +0200, Luca Ceresoli wrote:
> Add bindings for LCD panels based on the ILITEK ILI9806E RGB controller
> connected over SPI and the "ShenZhen New Display Co NDS040480800-V3"
> 480x800 panel based on it.
> 
> Signed-off-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>
> 
> ---
> 
> Changes in v2:
>  - remove T: line form MAINTAINERS entry
>  - reference spi-peripheral-props.yaml
>  - add 'maxItems: 1' to reg
>  - use unevaluatedProperties
>  - remove out of scope backlight node
> ---
>  .../display/panel/ilitek,ili9806e.yaml        | 63 +++++++++++++++++++
>  MAINTAINERS                                   |  5 ++
>  2 files changed, 68 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230810144116.855951-2-luca.ceresoli@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.