On 04/08/2023 13:44, Tomi Valkeinen wrote:
The driver has a few places where it does:
if (thing_is_enabled_in_config)
update_thing_bit_in_hw()
This means that if the thing is _not_ enabled, the bit never gets
cleared. This affects the h/vsyncs and continuous DSI clock bits.
I guess the idea was to keep the reset value unless it needs to be flipped.
Fix the driver to always update the bit.
Fixes: ff1ca6397b1d ("drm/bridge: Add tc358768 driver")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/bridge/tc358768.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358768.c b/drivers/gpu/drm/bridge/tc358768.c
index bc97a837955b..b668f77673c3 100644
--- a/drivers/gpu/drm/bridge/tc358768.c
+++ b/drivers/gpu/drm/bridge/tc358768.c
@@ -794,8 +794,8 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
val |= BIT(i + 1);
tc358768_write(priv, TC358768_HSTXVREGEN, val);
- if (!(mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS))
- tc358768_write(priv, TC358768_TXOPTIONCNTRL, 0x1);
+ tc358768_write(priv, TC358768_TXOPTIONCNTRL,
+ (mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) ? 0 : BIT(0));
/* TXTAGOCNT[26:16] RXTASURECNT[10:0] */
val = tc358768_to_ns((lptxcnt + 1) * dsibclk_nsk * 4);
@@ -861,11 +861,12 @@ static void tc358768_bridge_pre_enable(struct drm_bridge *bridge)
tc358768_write(priv, TC358768_DSI_HACT, hact);
/* VSYNC polarity */
- if (!(mode->flags & DRM_MODE_FLAG_NVSYNC))
- tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5), BIT(5));
+ tc358768_update_bits(priv, TC358768_CONFCTL, BIT(5),
+ (mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIT(5) : 0);
Was this the reverse before and should be:
(mode->flags & DRM_MODE_FLAG_PVSYNC) ? 0 : BIT(5)