Re: [PATCH v4] usb: typec: qcom: Update the logic of regulator enable and disable

[Guenter Roeck]

On 8/29/23 20:00, Hui Liu via B4 Relay wrote:
> From: Hui Liu <quic_huliu@xxxxxxxxxxx>
>
> Removed the call logic of disable and enable regulator
> in reset function. Enable the regulator in qcom_pmic_typec_start
> function and disable it in qcom_pmic_typec_stop function to
> avoid unbalanced regulator disable warnings.
>
> Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>

Please drop.

> Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Acked-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
> ---
> Changes in v4:
> - Removed regulator_enable and regulator_diable from
> pmic_typec_pdphy_reset function. And enable regulator in

... because I do not see the above change, and way too much changed
in the code since I sent a Reviewed-by: to make it appropriate
to keep it.

Actually, I don't see a difference between v3 and v4 of your patch.

Guenter

> qcom_pmic_typec_pdphy_start function and disable it in
> qcom_pmic_typec_pdphy_stop function.
> - Link to v3: https://lore.kernel.org/r/20230828-qcom-tcpc-v3-1-e95b7afa34d9@xxxxxxxxxxx
>
> Changes in v3:
> - Take Bryan's proposal to remove enable/disable operation in pdphy
> enable and pdphy disable function, then enable regulator in pdphy start
> function and disable it in pdphy stop function.
> - Link to v2: https://lore.kernel.org/r/20230824-qcom-tcpc-v2-1-3dd8c3424564@xxxxxxxxxxx
>
> Changes in v2:
> - Add Fixes tag
> - Link to v1: https://lore.kernel.org/r/20230823-qcom-tcpc-v1-1-fa81a09ca056@xxxxxxxxxxx
> ---
>   drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c | 12 ++++++------
>   1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
> index bb0b8479d80f..52c81378e36e 100644
> --- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
> +++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
> @@ -381,10 +381,6 @@ static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdph
>   	struct device *dev = pmic_typec_pdphy->dev;
>   	int ret;
>   
> -	ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
> -	if (ret)
> -		return ret;
> -
>   	/* PD 2.0, DR=TYPEC_DEVICE, PR=TYPEC_SINK */
>   	ret = regmap_update_bits(pmic_typec_pdphy->regmap,
>   				 pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG,
> @@ -422,8 +418,6 @@ static int qcom_pmic_typec_pdphy_disable(struct pmic_typec_pdphy *pmic_typec_pdp
>   	ret = regmap_write(pmic_typec_pdphy->regmap,
>   			   pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, 0);
>   
> -	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
> -
>   	return ret;
>   }
>   
> @@ -447,6 +441,10 @@ int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
>   	int i;
>   	int ret;
>   
> +	ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
> +	if (ret)
> +		return ret;
> +
>   	pmic_typec_pdphy->tcpm_port = tcpm_port;
>   
>   	ret = pmic_typec_pdphy_reset(pmic_typec_pdphy);
> @@ -467,6 +465,8 @@ void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy)
>   		disable_irq(pmic_typec_pdphy->irq_data[i].irq);
>   
>   	qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy);
> +
> +	regulator_disable(pmic_typec_pdphy->vdd_pdphy);
>   }
>   
>   struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev)
>
> ---
> base-commit: bbb9e06d2c6435af9c62074ad7048910eeb2e7bc
> change-id: 20230822-qcom-tcpc-d41954ac65fa
>
> Best regards,