On 8/29/23 20:00, Hui Liu via B4 Relay wrote:I didn't get your mean. would you please explain it?
From: Hui Liu <quic_huliu@xxxxxxxxxxx>
Removed the call logic of disable and enable regulator
in reset function. Enable the regulator in qcom_pmic_typec_start
function and disable it in qcom_pmic_typec_stop function to
avoid unbalanced regulator disable warnings.
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
Please drop.
Yes, The codes are same between V3 and V4, I just update the commit log as Bryan said. How about I resend the V4 and update the cover letter like "Fixed the commit log"
Fixes: a4422ff22142 ("usb: typec: qcom: Add Qualcomm PMIC Type-C driver")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
---
Changes in v4:
- Removed regulator_enable and regulator_diable from
pmic_typec_pdphy_reset function. And enable regulator in
... because I do not see the above change, and way too much changed
in the code since I sent a Reviewed-by: to make it appropriate
to keep it.
Actually, I don't see a difference between v3 and v4 of your patch.
Guenter
qcom_pmic_typec_pdphy_start function and disable it in
qcom_pmic_typec_pdphy_stop function.
- Link to v3: https://lore.kernel.org/r/20230828-qcom-tcpc-v3-1-e95b7afa34d9@xxxxxxxxxxx
Changes in v3:
- Take Bryan's proposal to remove enable/disable operation in pdphy
enable and pdphy disable function, then enable regulator in pdphy start
function and disable it in pdphy stop function.
- Link to v2: https://lore.kernel.org/r/20230824-qcom-tcpc-v2-1-3dd8c3424564@xxxxxxxxxxx
Changes in v2:
- Add Fixes tag
- Link to v1: https://lore.kernel.org/r/20230823-qcom-tcpc-v1-1-fa81a09ca056@xxxxxxxxxxx
---
drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
index bb0b8479d80f..52c81378e36e 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.c
@@ -381,10 +381,6 @@ static int qcom_pmic_typec_pdphy_enable(struct pmic_typec_pdphy *pmic_typec_pdph
struct device *dev = pmic_typec_pdphy->dev;
int ret;
- ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
- if (ret)
- return ret;
-
/* PD 2.0, DR=TYPEC_DEVICE, PR=TYPEC_SINK */
ret = regmap_update_bits(pmic_typec_pdphy->regmap,
pmic_typec_pdphy->base + USB_PDPHY_MSG_CONFIG_REG,
@@ -422,8 +418,6 @@ static int qcom_pmic_typec_pdphy_disable(struct pmic_typec_pdphy *pmic_typec_pdp
ret = regmap_write(pmic_typec_pdphy->regmap,
pmic_typec_pdphy->base + USB_PDPHY_EN_CONTROL_REG, 0);
- regulator_disable(pmic_typec_pdphy->vdd_pdphy);
-
return ret;
}
@@ -447,6 +441,10 @@ int qcom_pmic_typec_pdphy_start(struct pmic_typec_pdphy *pmic_typec_pdphy,
int i;
int ret;
+ ret = regulator_enable(pmic_typec_pdphy->vdd_pdphy);
+ if (ret)
+ return ret;
+
pmic_typec_pdphy->tcpm_port = tcpm_port;
ret = pmic_typec_pdphy_reset(pmic_typec_pdphy);
@@ -467,6 +465,8 @@ void qcom_pmic_typec_pdphy_stop(struct pmic_typec_pdphy *pmic_typec_pdphy)
disable_irq(pmic_typec_pdphy->irq_data[i].irq);
qcom_pmic_typec_pdphy_reset_on(pmic_typec_pdphy);
+
+ regulator_disable(pmic_typec_pdphy->vdd_pdphy);
}
struct pmic_typec_pdphy *qcom_pmic_typec_pdphy_alloc(struct device *dev)
---
base-commit: bbb9e06d2c6435af9c62074ad7048910eeb2e7bc
change-id: 20230822-qcom-tcpc-d41954ac65fa
Best regards,