Re: [PATCH V2 ethtool] hns3: add support dump registers for hns3 driver

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to ethtool/ethtool.git (master)
by Michal Kubecek <mkubecek@xxxxxxx>:

On Tue, 29 Aug 2023 14:56:56 +0800 you wrote:
> Add support pretty printer for the registers of hns3 driver.
> This printer supports PF and VF, and is compatible with hns3
> drivers of earlier versions.
> 
> Sample output:
> 
> $ ethtool -d eth1
> [cmdq_regs]
>   comm_nic_csq_baseaddr_l : 0x48168000
>   comm_nic_csq_baseaddr_h : 0x00000000
>   comm_nic_csq_depth      : 0x00000080
>   comm_nic_csq_tail       : 0x00000050
>   comm_nic_csq_head       : 0x00000050
>   comm_nic_crq_baseaddr_l : 0x48170000
>   comm_nic_crq_baseaddr_h : 0x00000000
>   comm_nic_crq_depth      : 0x00000080
>   comm_nic_crq_tail       : 0x00000000
>   comm_nic_crq_head       : 0x00000000
>   comm_vector0_cmdq_src   : 0x00000000
>   comm_cmdq_intr_sts      : 0x00000000
>   comm_cmdq_intr_en       : 0x00000002
>   comm_cmdq_intr_gen      : 0x00000000
> [common_regs]
>   misc_vector_base    : 0x00000001
>   pf_other_int        : 0x00000040
>   misc_reset_sts      : 0x00000000
>   misc_vector_int_sts : 0x00000000
>   global_reset        : 0x00000000
>   fun_rst_ing         : 0x00000000
>   gro_en              : 0x00000001
> ...
> 
> [...]

Here is the summary with links:
  - [V2,ethtool] hns3: add support dump registers for hns3 driver
    https://git.kernel.org/pub/scm/network/ethtool/ethtool.git/commit/?id=a1f71f85d02e

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html