Re: [PATCH v6 1/3] dt-bindings: Add beaglecc1352

[Krzysztof Kozlowski]

On 02/10/2023 20:24, Ayush Singh wrote:
> Add DT bindings for BeaglePlay CC1352 co-processor.
> 

Thank you for your patch. There is something to discuss/improve.

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching. For example:
dt-bindings: net:


> The BeaglePlay has a CC1352 co-processor. This co-processor is connected
> to the main AM62 (running Linux) over UART. In the BeagleConnect
> Technology, CC1352 is responsible for handling 6LoWPAN communication
> with beagleconnect freedom nodes as well as their discovery
> 
> This commit adds net/ti,cc1352p7. It is used by gb-beagleplay greybus

A nit: I pointed you to the documentation explaining not to use "This
commit adds". It's v6 and the wording is back. Instead drop both
sentences - they are pointless in this context. First one repeats
previous text, second describes driver, but we do not talk here about
drivers.

> driver.
> 
> Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx>
> ---
>  .../devicetree/bindings/net/ti,cc1352p7.yaml  | 48 +++++++++++++++++++
>  MAINTAINERS                                   |  6 +++
>  2 files changed, 54 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> new file mode 100644
> index 000000000000..57bc2c43e5b1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments Simplelink CC1352P7 wireless MCU
> +
> +description:
> +  The cc1352p7 mcu can be connected via SPI or UART.

If over SPI, then the binding is incomplete. This is fine for now, I guess.

> +
> +maintainers:
> +  - Ayush Singh <ayushdevel1325@xxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: ti,cc1352p7
> +
> +  clocks:
> +    maxItems: 2

Instead please list the items like:

clocks:
  items:
    - description: High-Foo-bar
    - description: Low-Foo-bar

> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  power-gpios:
> +    maxItems: 3
> +    description:
> +      The device has three power rails that are exposed on external pins VDDS,
> +      VDDR and DCOUPL.

No, power rails are not GPIOs. You need supplies, so:
vdds-supply: true
vddr-supply: true
dcoupl-supply: true

Look also at:
Documentation/devicetree/bindings/gpio/gpio-consumer-common.yaml
which explicitly allows only one powerdown GPIO.

> +

Best regards,
Krzysztof