Re: [PATCH v6 1/3] dt-bindings: Add beaglecc1352

[Ayush Singh]

> > driver.
> >
> > Signed-off-by: Ayush Singh <ayushdevel1325@xxxxxxxxx>
> > ---
> >   .../devicetree/bindings/net/ti,cc1352p7.yaml  | 48 +++++++++++++++++++
> >   MAINTAINERS                                   |  6 +++
> >   2 files changed, 54 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> > new file mode 100644
> > index 000000000000..57bc2c43e5b1
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/net/ti,cc1352p7.yaml
> > @@ -0,0 +1,48 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/net/ti,cc1352p7.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Texas Instruments Simplelink CC1352P7 wireless MCU
> > +
> > +description:
> > +  The cc1352p7 mcu can be connected via SPI or UART.
> If over SPI, then the binding is incomplete. This is fine for now, I guess.
>
> Best regards,
> Krzysztof

Well, I added the line about SPI because the data sheet states that 
CC1352P7 can be connected over SPI or UART when used as wireless MCU. 
But yes, I do not have much knowledge about SPI itself, so the bindings 
might be incomplete for SPI usage. Should I remove it or leave it be?


Sincerely,

Ayush Singh