Re: [PATCH v2 2/2] iio: adc: ads7038: Add driver support for 12bit ADC

From: Jonathan Cameron
Date: Thu Oct 05 2023 - 12:43:17 EST

On Thu, 5 Oct 2023 05:54:55 +0200
werneazc@xxxxxxxxx wrote:

> From: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>
>
> The driver is designed to support both, ADS7038 and ADS7138, but the
> implementation of the device access is limited to ADS7038 (SPI). The
> ADS7138 is accessed via I2C.
>
> The driver has a regmap and a core file that abstracts device access.
> Currently, the driver does support manual mode only.
>
> Signed-off-by: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>

Hi Andre,

Thanks for your driver.

Some comments inline. Main one is that I'm not that keen to see the
complexity to support the additional part in here, without the support for
that part being in the same patch series. We have a long history of
people proposing generic layers then only ending up with one upstream
user of them! I'm sure that doesn't apply here, but it does govern the policy
which is that we add complexity and abstraction when it's useful and generally
not before.

Thanks,

Jonathan
> ---
> -v2: Correct "-Wmissing-prototypes" warning for 'ads7038_read_raw' (add
> missing static).
> ---
> MAINTAINERS | 10 +
> drivers/iio/adc/Kconfig | 22 ++
> drivers/iio/adc/Makefile | 3 +
> drivers/iio/adc/ti-ads7038-core.c | 137 +++++++
> drivers/iio/adc/ti-ads7038-regmap.c | 91 +++++
> drivers/iio/adc/ti-ads7038-spi.c | 375 +++++++++++++++++++
> drivers/iio/adc/ti-ads7038.h | 551 ++++++++++++++++++++++++++++
> 7 files changed, 1189 insertions(+)
> create mode 100644 drivers/iio/adc/ti-ads7038-core.c
> create mode 100644 drivers/iio/adc/ti-ads7038-regmap.c
> create mode 100644 drivers/iio/adc/ti-ads7038-spi.c
> create mode 100644 drivers/iio/adc/ti-ads7038.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 35977b269d5e..dace0a03987e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -21252,6 +21252,16 @@ T: git https://github.com/jcmvbkbc/linux-xtensa.git
> F: arch/xtensa/
> F: drivers/irqchip/irq-xtensa-*
>
> +TEXAS INSTRUMENT'S ADS7038 ADC DRIVER
> +M: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>
> +L: linux-iio@xxxxxxxxxxxxxxx
> +S: Maintained
> +F: Documentation/devicetree/bindings/iio/adc/ti,ads7038.yaml
> +F: drivers/iio/adc/ti-ads7038.h
> +F: drivers/iio/adc/ti-ads7038-core.c
> +F: drivers/iio/adc/ti-ads7038-regmap.c
> +F: drivers/iio/adc/ti-ads7038-spi.c
> +
> TEXAS INSTRUMENTS ASoC DRIVERS
> M: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
> L: alsa-devel@xxxxxxxxxxxxxxxx (moderated for non-subscribers)
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 517b3db114b8..b3a2f27ecd69 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -1239,6 +1239,28 @@ config TI_ADS1015
> This driver can also be built as a module. If so, the module will be
> called ti-ads1015.
>
> +config TI_ADS7038
> + tristate "Texas Instruments ADS7038 ADC driver"
> + depends on (I2C || SPI_MASTER)
> + select REGMAP
> + select TI_ADS7038_SPI if (SPI_MASTER)

No need for brackets. Whilst I don't care strongly - in many cases
we flip the logic and it makes particular sense here as the part numbers
are different.

So I'd have this module as a hidden option (drop the text after tristate)
and select it from the SPI and I2C device specific modules. That way
they can be picked by their actual part numbers.


> + help
> + Say yes here to build support for TI ADS7038 12BIT ADC.
> +
> + To compile this driver as a module, choose M here: the core module
> + will be called ti-ads7038 and you will also get ti-ads7038-spi for SPI support.
> +
> +config TI_ADS7038_SPI
> + tristate
> + depends on TI_ADS7038
> + depends on SPI_MASTER
> + select REGMAP
> + help
> + Say yes here to build support for TI ADS7038 12BIT ADC (SPI connected).
> +
> + To compile this driver as a module, choose M here: the core module
> + will be called ti-ads7038 and you will also get ti-ads7038-spi for SPI support.
> +
> config TI_ADS7924
> tristate "Texas Instruments ADS7924 ADC"
> depends on I2C
> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> index 2facf979327d..6aa355ab24de 100644
> --- a/drivers/iio/adc/Makefile
> +++ b/drivers/iio/adc/Makefile
> @@ -111,6 +111,9 @@ obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
> obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
> obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
> obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
> +obj-$(CONFIG_TI_ADS7038) += ti-ads7038.o
> +ti-ads7038-objs := ti-ads7038-core.o ti-ads7038-regmap.o
> +obj-$(CONFIG_TI_ADS7038_SPI) += ti-ads7038-spi.o
> obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o
> obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
> obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
> diff --git a/drivers/iio/adc/ti-ads7038-core.c b/drivers/iio/adc/ti-ads7038-core.c
> new file mode 100644
> index 000000000000..345ecb4e33d8
> --- /dev/null
> +++ b/drivers/iio/adc/ti-ads7038-core.c
> @@ -0,0 +1,137 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/* This driver supports TI 12Bit ADC devices
> + *
> + * - ADS7038 with SPI interface
> + * - ADS7138 with I2C interface (future)
> + *
> + * Copyright (C) 2023 SYS TEC electronic AG
> + * Author: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>
> + */
> +#include <linux/device.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>

I doubt you use anything from in here...

> +#include <linux/iio/types.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include "linux/regulator/consumer.h"
> +
> +#include "ti-ads7038.h"
> +
> +#define ADS7038_V_CHAN(_chan, _addr) \
> + { \
> + .type = IIO_VOLTAGE, \
> + .indexed = 1, \
> + .address = _addr, \
> + .channel = _chan, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE), \
> + .scan_index = _addr, \
> + .scan_type = { \
> + .sign = 's', \
> + .realbits = 12, \
> + .storagebits = 16, \
> + .shift = 4, \
> + .endianness = IIO_CPU, \

You haven't done buffered mode yet so don't add this info yet.
However, whilst here we rarely do endian conversion in the driver
for the buffered flow - instead just set this to IIO_BE and pass
the raw reads through.

> + }, \
> + .datasheet_name = "AIN"#_chan, \
> + }
> +
> +static const struct iio_chan_spec ads7038_channels[] = {
> + ADS7038_V_CHAN(0, AIN0), ADS7038_V_CHAN(1, AIN1),
> + ADS7038_V_CHAN(2, AIN2), ADS7038_V_CHAN(3, AIN3),
> + ADS7038_V_CHAN(4, AIN4), ADS7038_V_CHAN(5, AIN5),
> + ADS7038_V_CHAN(6, AIN6), ADS7038_V_CHAN(7, AIN7),
> +};
> +
> +static int ads7038_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2,
> + long mask)
> +{
> + unsigned int ret;
> + struct ads7038_ch_meas_result tmp_val;
> + struct ads7038_data *const data = (struct ads7038_data *)iio_priv(indio_dev);

No need for cast, also const doesn't do anything terribly useful beyond
make the line longer so drop it.

> + struct ads7038_info *const info = (struct ads7038_info *)data->info;
> +
> + ret = info->read_channel(indio_dev, chan->channel, &tmp_val);
> +
> + if (ret < 0) {
> + dev_err(&indio_dev->dev, "Read channel returned with error %d", ret);
> + return ret;
> + }

Only read the channel if you actually use the value...

> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + *val = tmp_val.raw;
> +
> + ret = IIO_VAL_INT;
return IIO_VAL_INT;

as nothing to do after the switch.

> + break;
> + case IIO_CHAN_INFO_SCALE:
> + ret = regulator_get_voltage(data->reg);
> + if (ret < 0)
> + break;
> +
> + *val = ret / 1000; /* uV -> mV */
> + *val2 = (1 << chan->scan_type.realbits) - 1;
> +
> + ret = IIO_VAL_FRACTIONAL;
> + break;
> + default:
> + ret = -EINVAL;
> + break;
> + }
> +
> + return ret;
> +}
> +
> +static const struct iio_info ads7038_iio_info = {
> + .read_raw = ads7038_read_raw,
> +};
> +
> +int ads7038_common_probe(struct device *parent, const struct ads7038_info *info,
> + struct regmap *const regmap,
> + struct regulator *const ref_voltage_reg,
> + const char *name, int irq)
> +{
> + struct ads7038_data *data;
> + struct iio_dev *indio_dev;
> +
> + indio_dev = devm_iio_device_alloc(parent, sizeof(struct ads7038_data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + indio_dev->name = name;
> + indio_dev->channels = ads7038_channels;
> + indio_dev->num_channels = ARRAY_SIZE(ads7038_channels);
> + indio_dev->info = &ads7038_iio_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + data = (struct ads7038_data *)iio_priv(indio_dev);

iio_priv() returns a void *, not cast should be needed.

> + mutex_init(&data->lock);
> + data->dev = parent;
> + data->info = info;
> + data->regmap = regmap;
> + data->reg = ref_voltage_reg;
> +
> + /* Link general device driver with IIO device driver data */
> + dev_set_drvdata(parent, indio_dev);
> +
> + iio_device_register(indio_dev);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ads7038_common_probe);
> +
> +int ads7038_common_remove(struct device *parent)
> +{
> + struct iio_dev *indio_dev = (struct iio_dev *)dev_get_drvdata(parent);
> +
> + iio_device_unregister(indio_dev);

Use devm_iio_device_register() and get rid of this remove function.

> +
> + return 0;
> +}
> +EXPORT_SYMBOL(ads7038_common_remove);
> +
> +MODULE_AUTHOR("Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ADS7038 and ADS7138 core driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ti-ads7038-regmap.c b/drivers/iio/adc/ti-ads7038-regmap.c
> new file mode 100644
> index 000000000000..d10ca3122681
> --- /dev/null
> +++ b/drivers/iio/adc/ti-ads7038-regmap.c
> @@ -0,0 +1,91 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/* This driver supports TI 12Bit ADC devices
> + *
> + * - ADS7038 with SPI interface
> + * - ADS7138 with I2C interface (future)

I'm not sure why this deserves it's own file. If it's
specific to the SPI part then put it in the SPI file. If general,
put it in the common file.

> + *
> + * Copyright (C) 2023 SYS TEC electronic AG
> + * Author: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>
> + */
> +#include <linux/bitops.h>
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include "ti-ads7038.h"
> +
> +static const struct regmap_range ads7038_noaccess_ranges[] = {
> + regmap_reg_range(0x06, 0x06), regmap_reg_range(0x08, 0x08),
> + regmap_reg_range(0x0A, 0x0A), regmap_reg_range(0x0C, 0x0C),
> + regmap_reg_range(0x0E, 0x0F), regmap_reg_range(0x15, 0x15),
> + regmap_reg_range(0x19, 0x19), regmap_reg_range(0x1B, 0x1B),
> + regmap_reg_range(0x1D, 0x1D), regmap_reg_range(0x1F, 0x1F),
> + regmap_reg_range(0x40, 0x5F), regmap_reg_range(0x70, 0x7F),
> + regmap_reg_range(0xB0, 0xC2), regmap_reg_range(0xC4, 0xC4),
> + regmap_reg_range(0xC6, 0xC6), regmap_reg_range(0xC8, 0xC8),
> + regmap_reg_range(0xCA, 0xCA), regmap_reg_range(0xCC, 0xCC),
> + regmap_reg_range(0xCE, 0xCE), regmap_reg_range(0xD0, 0xD0),
> + regmap_reg_range(0xD2, 0xE8), regmap_reg_range(0xEA, 0xEA),
> +};
> +
> +static const struct regmap_range ads7038_readable_ranges[] = {
> + regmap_reg_range(0x00, 0x00), /*This is a dummy entry to provide a valid access pointer */
Space after /*

What doesn't work if you don't provide anything at all for yes_ranges?
I assume it's not accessed by regmap if n_yes_ranges = 0.

> +};
> +
> +static const struct regmap_access_table ads7038_readable_table = {
> + .yes_ranges = ads7038_readable_ranges,
> + .n_yes_ranges = 0, /* regmap.c: In case zero "yes ranges" are supplied, any reg is OK */
> + .no_ranges = ads7038_noaccess_ranges,
> + .n_no_ranges = ARRAY_SIZE(ads7038_noaccess_ranges),
> +};
> +
> +static const struct regmap_range ads7038_volatile_ranges[] = {
> + regmap_reg_range(ADS7038_SYSTEM_STATUS_REG, ADS7038_SYSTEM_STATUS_REG),
> + regmap_reg_range(ADS7038_GPI_VALUE_REG, ADS7038_GPI_VALUE_REG),
> + regmap_reg_range(ADS7038_EVENT_FLAG_REG, ADS7038_EVENT_FLAG_REG),
> + regmap_reg_range(ADS7038_MAX_CH0_LSB_REG, ADS7038_MAX_CH7_MSB_REG),
> + regmap_reg_range(ADS7038_MIN_CH0_LSB_REG, ADS7038_MIN_CH7_MSB_REG),
> + regmap_reg_range(ADS7038_RECENT_CH0_LSB_REG,
> + ADS7038_RECENT_CH7_MSB_REG),
> +};
> +
> +static const struct regmap_access_table ads7038_volatile_table = {
> + .yes_ranges = ads7038_volatile_ranges,
> + .n_yes_ranges = ARRAY_SIZE(ads7038_volatile_ranges),
> + .no_ranges = ads7038_noaccess_ranges,
> + .n_no_ranges = ARRAY_SIZE(ads7038_noaccess_ranges),
> +};
> +
> +/* It is okay to include noaccess registers in range, because they have been proven at first. */
> +static const struct regmap_range ads7038_writable_range[] = {
> + regmap_reg_range(ADS7038_SYSTEM_STATUS_REG, ADS7038_GPO_VALUE_REG),
> + regmap_reg_range(ADS7038_SEQUENCE_CFG_REG, ADS7038_ALERT_PIN_CFG_REG),
> + regmap_reg_range(ADS7038_EVENT_HIGH_FLAG_REG, ADS7038_LOW_TH_CH7_REG),
> + regmap_reg_range(ADS7038_GPO0_TRIG_EVENT_SEL_REG,
> + ADS7038_GPO_VALUE_TRIG_REG),
> +};
> +
> +static const struct regmap_access_table ads7038_writable_table = {
> + .yes_ranges = ads7038_writable_range,
> + .n_yes_ranges = ARRAY_SIZE(ads7038_writable_range),
> + .no_ranges = ads7038_noaccess_ranges,
> + .n_no_ranges = ARRAY_SIZE(ads7038_noaccess_ranges),
> +};
> +
> +const struct regmap_config ads7038_regmap_config = {
> + .name = "ads7038",
> + .reg_bits = ADS7038_REGISTER_SIZE,
> + .val_bits = ADS7038_REGISTER_SIZE,
> +
> + .wr_table = &ads7038_writable_table,
> + .rd_table = &ads7038_readable_table,
> + .volatile_table = &ads7038_volatile_table,
> +
> + .max_register = ADS7038_REG_ADDRESS_MAX,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +EXPORT_SYMBOL(ads7038_regmap_config);
Exports in IIO are all namespaced. Almost all GPL as well.

EXPORT_SYMBOL_NS_GPL(ads7038_regmap_config, IIO_ADS7038);

> +
> +MODULE_AUTHOR("Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ADS7038 SPI bus driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ti-ads7038-spi.c b/drivers/iio/adc/ti-ads7038-spi.c
> new file mode 100644
> index 000000000000..e26884afb9c6
> --- /dev/null
> +++ b/drivers/iio/adc/ti-ads7038-spi.c
> @@ -0,0 +1,375 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * This driver supports TI 12Bit ADC devices
> + *
> + * - ADS7038 with SPI interface
> + *
> + * Copyright (C) 2023 SYS TEC electronic AG
> + * Author: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>
> + */
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/spi/spi.h>
> +#include <linux/types.h>
> +
> +#include "ti-ads7038.h"
> +
> +#define ADS7038_OPCODE_NOOP 0x00
> +#define ADS7038_OPCODE_REGREAD 0x10
> +#define ADS7038_OPCODE_REGWRITE 0x08
> +#define ADS7038_OPCODE_SETBIT 0x18
> +#define ADS7038_OPCODE_CLEATBIT 0x20
> +
> +/*
> + * The bitwidth for ADC channel results differ
> + * by setting average and status
> + * in the dedicated configuration registers.
> + */
> +#define ADS7038_NO_AVG_NO_STAT 12 /* bits */
> +#define ADS7038_NO_AVG_STAT 16 /* bits */
> +#define ADS7038_AVG_NO_STAT 16 /* bits */
> +#define ADS7038_AVG_STAT 20 /* bits */
> +
> +#define ADS7038_SPI_FRAME_SIZE_REG 3 /* bytes */
> +#define ADS7038_SPI_FRAME_SIZE_CHAN_MAX 2 /* elements */
> +
> +static int ads7038_regmap_spi_read(void *context, unsigned int reg,
> + unsigned int *val)
> +{
> + struct device *const dev = (struct device *)context;
context is void * so you shouldn't need to cast it.
Unlikely we care locally about the const

struct device *dev = context;

> + struct spi_device *const spi = to_spi_device(dev);

Likewise, const is probably fine but it's hurting readablity a bit
here so I'd not bother.

> + int ret;
> + const u8 tx_buf[ADS7038_SPI_FRAME_SIZE_REG] = {
> + [0] = ADS7038_OPCODE_REGREAD,
> + [1] = (u8)(reg & GENMASK(7, 0)),
> + [2] = 0, /* dummy data */
> + };
> + u8 rx_buf[ADS7038_SPI_FRAME_SIZE_REG] = { 0 };
> +
> + /* Data contains 8bit address and 8bit register data */
> + struct spi_transfer xfer[] = {
> + {
> + .tx_buf = tx_buf,
Indent these another tab.
.tx_buf = tx_buf,
etc to make it easier to read.

> + .rx_buf = NULL,
> + .len = ADS7038_SPI_FRAME_SIZE_REG,
> + .bits_per_word = ADS7038_REGISTER_SIZE,
> + .cs_change = 1,
> + },
> + {
> + .tx_buf = NULL,
> + .rx_buf = rx_buf,
> + .len = ADS7038_SPI_FRAME_SIZE_REG,
> + .bits_per_word = ADS7038_REGISTER_SIZE,
> + },
> + };
> +
> + if (!val)
> + return -EINVAL;
> +
> + ret = spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
> +
> + if (ret != 0)
> + return ret;
> +
> + *val = (unsigned int)rx_buf[0];
Do you need the cast?

> +
> + return ret;
return 0;
as we know it's 0 here so good to make that clear.

> +}
> +
> +static int ads7038_regmap_spi_write(void *context, unsigned int reg,
> + unsigned int val)
> +{
> + unsigned int ret;
> + unsigned int regval;
> + struct device *const dev = (struct device *)context;
> + struct spi_device *const spi = to_spi_device(dev);
> + struct iio_dev *const indio_dev =
> + (struct iio_dev *)dev_get_drvdata(dev);
> + struct ads7038_data *const data =
> + (struct ads7038_data *)iio_priv(indio_dev);
> + const u8 buf[ADS7038_SPI_FRAME_SIZE_REG] = {
> + [0] = ADS7038_OPCODE_REGWRITE,
> + [1] = (u8)(reg & GENMASK(7, 0)),
> + [2] = (u8)(val & GENMASK(7, 0)),
> + };
> +
> + struct spi_transfer xfer[] = {
> + {.tx_buf = buf,
> + .rx_buf = NULL,
> + .len = ARRAY_SIZE(buf) },
> + };
> +
> + ret = spi_sync_transfer(spi, xfer, ARRAY_SIZE(xfer));
> +
> + if (ret != 0)
> + goto error;
> +
> + /* If status or avaraging is used, the length for the spi output frame changes. */
> + if (reg == ADS7038_DATA_CFG_REG || reg == ADS7038_OSR_CFG_REG) {
> + ret = ads7038_regmap_spi_read(context, ADS7038_DATA_CFG_REG, &regval);
> + if (ret != 0)
> + goto error;
> +
> + data->faverage = (regval & ADS7038_DATA_CFG_APPEND_STATUS) ? 1 : 0;

This is done at wrong level. If you want to stash these flags then do it at the caller
who will know that reg was one of these two and can check the value.

It has nothing to do with regmap that I can see.


> +
> + ret = ads7038_regmap_spi_read(context, ADS7038_OSR_CFG_REG, &regval);
> + if (ret != 0)
> + goto error;
> +
> + data->fstatus = (regval & ADS7038_OSR_CFG_OSR) ? 1 : 0;
> + }
> +
> +error:
> + return ret;
> +}
> +
> +static int ads7038_read_reg(struct device *dev, const unsigned int reg,
> + unsigned int *val)
> +{
> + int ret;
> + struct iio_dev *const indio_dev = (struct iio_dev *)dev_get_drvdata(dev);
> + struct ads7038_data *const data = (struct ads7038_data *)iio_priv(indio_dev);
> + struct regmap *const map = data->regmap;
> +
> + ret = regmap_read(map, reg, val);

I don't see why you need this callback. The core driver code should have the regmap
available - so it can use it without jumping through these hoops.

> +
> + return ret;
> +}
> +
> +static int ads7038_write_reg(struct device *dev, const unsigned int reg,
> + unsigned int val)
> +{
> + struct iio_dev *const indio_dev = (struct iio_dev *)dev_get_drvdata(dev);
> + struct ads7038_data *const data = (struct ads7038_data *)iio_priv(indio_dev);
> + struct regmap *const map = data->regmap;
> + int ret;
> +
> + ret = regmap_write(map, reg, val);

Same for this.

> +
> + return ret;
> +}
> +
> +static int ads7038_set_mode_manual(struct spi_device *dev,
> + struct ads7038_data *const data)

> +{
> + int ret;
> + struct regmap *const map = data->regmap;
> + const unsigned int regs[] = { ADS7038_OPMODE_CFG_REG,
> + ADS7038_SEQUENCE_CFG_REG
> + };
> + unsigned int reg_values[2] = { 0 };
> + unsigned int idx;
> +
> + /* Registers need to be read first to adapt configuration bits. */
> + for (idx = 0; idx < ARRAY_SIZE(regs); ++idx) {
> + ret = regmap_read(map, regs[idx], &reg_values[idx]);
> + if (ret != 0) {
> + dev_dbg(&dev->dev,
> + "Cannot read value from register %02X.\n",
> + regs[idx]);
> + break;
> + }
> + }
> +
> + if (ret != 0)
> + goto out;
> +
> + reg_values[0] &= ~ADS7038_OPMODE_CFG_CONV_MODE;
> + reg_values[0] |= ADS7038_OPMODE_CFG_CONV_MODE_MANUAL;
> + reg_values[0] &= ~ADS7038_SEQUENCE_CFG_SEQ_MODE;
> + reg_values[0] |= ADS7038_SEQUENCE_CFG_SEQ_MODE_MANUAL;
> +
> + for (idx = 0; idx < ARRAY_SIZE(regs); ++idx) {
> + ret = regmap_write(map, regs[idx], reg_values[idx]);
> + if (ret != 0) {
> + dev_dbg(&dev->dev,
> + "Cannot write value to register %02X.\n",
> + regs[idx]);
> + break;
> + }
> + }
> +
> +out:
> + return ret;
> +}
> +
> +static int ads7038_read_channel(struct iio_dev *indio_dev,
> + const enum MANUAL_CHID chan,
> + struct ads7038_ch_meas_result *const res)
> +{
> + int ret;
> + struct ads7038_data *const data = (struct ads7038_data *)iio_priv(indio_dev);
> + struct spi_device *const spi_dev = to_spi_device(data->dev);
> + enum FUNC_MODE *const current_mode = &data->func_mode;
> + const u8 chan_buf[ADS7038_SPI_FRAME_SIZE_REG] = {
> + [0] = ADS7038_OPCODE_REGWRITE,
> + [1] = ADS7038_CHANNEL_SEL_REG,
> + [2] = chan,
> + };
> + u16 rx_buf[ADS7038_SPI_FRAME_SIZE_CHAN_MAX] = { 0 };
> +
> + /*
> + * Fixup: If the channel not changes between sequential reads, the first
> + * SPI frame is not necessary. This can be handled separately.
> + */
> + struct spi_transfer xfer[] = {
> + {
> + .tx_buf = chan_buf,
> + .rx_buf = NULL,
> + .len = ARRAY_SIZE(chan_buf),
> + .bits_per_word = ADS7038_REGISTER_SIZE,
> + .tx_nbits = SPI_NBITS_SINGLE,
> + .cs_change = 1,
> + },
> + {
> + .tx_buf = NULL,
> + .rx_buf = rx_buf,
> + .len = sizeof(rx_buf),
> + .tx_nbits = SPI_NBITS_SINGLE,
> + .cs_change = 1,
> + },
> + {.tx_buf = NULL,
> + .rx_buf = rx_buf,
> + .len = sizeof(rx_buf),
> + .tx_nbits = SPI_NBITS_SINGLE },
> + };
So this looks like a simple normal register write followed by a dummy read (as still looking
at previous channel) then the real one?
That's not particularly nice. You could break it into a regmap_write() followed by
separate handling of the reads. On the plus side this scheme does allow for efficient
capture of lots of channels when you add that.

The second case rather shows this isn't really a device where the regmap
abstraction fully covers it...


> +
> + if (chan > AIN_MAX)
> + return -EINVAL;
> +
> + mutex_lock(&data->lock);
> +
> + /* Configure read manual mode for single read of channel value */
> + if (*current_mode != MAN) {
> + dev_dbg(&spi_dev->dev, "Set manual mode for reading data.\n");
> + ret = ads7038_set_mode_manual(spi_dev, data);
> + if (ret != 0)
> + goto out;
> +
> + *current_mode = MAN;
> + }
> +
> + ret = spi_sync_transfer(spi_dev, xfer, ARRAY_SIZE(xfer));
> +
> + if (ret != 0)
> + goto out;
> +
> + if (!!data->faverage) {
In gneeral !! does nothing here, but make it a a bool and that will be more obvious.

> + res->raw = be16_to_cpup((__be16 *)&rx_buf[0]);
> + res->faverage = 1;
> + if (!!data->fstatus) {
> + res->status = (be16_to_cpup((__be16 *)&rx_buf[1]) & GENMASK(15, 11)) >> 11;

Make rx_buf an array of __be16 so that you don't have to cast here plus correctly
represent the type.#

FIELD_GET() with appropriate defines might work well here.


> + res->fstatus = 1;
> + }
> + } else {
> + res->raw = be16_to_cpup((__be16 *)&rx_buf[0]);
> + res->raw >>= 4;
> + if (!!data->fstatus) {
> + res->status = (be16_to_cpup((__be16 *)&rx_buf[0]) & GENMASK(3, 0));
> + res->fstatus = 1;
> + }
> + }
> +
> +out:
> + mutex_unlock(&data->lock);
> + return ret;
> +}
> +
> +static struct regmap_bus ads7038_regmap_bus = {
> + .reg_write = ads7038_regmap_spi_write,
> + .reg_read = ads7038_regmap_spi_read,
> + .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
> + .val_format_endian_default = REGMAP_ENDIAN_LITTLE,
> +};
> +
> +static const struct ads7038_info ads7038_info = {
> + .read_reg = ads7038_read_reg,
> + .write_reg = ads7038_write_reg,
> + .read_channel = ads7038_read_channel,
> +};
> +
> +static int ads7038_spi_probe(struct spi_device *spi)
> +{
> + const struct spi_device_id *id = spi_get_device_id(spi);
> + struct regmap *regmap;
> + const struct regmap_config *regmap_config = &ads7038_regmap_config;

Just use this inline instead of adding local variable.


> + int ret;
> + struct regulator *reg;
> +
> + ret = spi_setup(spi);
> + if (ret < 0) {
> + dev_dbg(&spi->dev, "Spi_setup failed!\n");
> + goto error_spi;
> + }
> +
> + regmap = devm_regmap_init(&spi->dev, &ads7038_regmap_bus, &spi->dev,
> + regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_dbg(&spi->dev, "Failed to allocate register map\n");
> + ret = PTR_ERR(regmap);
> + goto error_spi;
> + }
> +
> + reg = devm_regulator_get(&spi->dev, "vref");
Get the regulator inside the common probe - it's not SPI specific and you
have the dev available to retrieve it.

> + if (IS_ERR(reg)) {
> + dev_dbg(&spi->dev, "Failed to get regulator \"vref\"\n");
> + ret = PTR_ERR(reg);
> + goto error_spi;
> + }
> +
> + ret = regulator_enable(reg);
> + if (ret) {
> + dev_dbg(&spi->dev, "Failed to enable regulator \"vref\"\n");
> + goto error_spi;
> + }
> +
> + return ads7038_common_probe(&spi->dev, &ads7038_info, regmap,
> + reg, id->name, spi->irq);
> +
> +error_spi:
> + dev_err(&spi->dev, "Probe failed\n");
> + return ret;
> +}
> +
> +static void ads7038_spi_remove(struct spi_device *spi)
> +{
> + int ret;
> +
> + ret = ads7038_common_remove(&spi->dev);

Seems likely you can easily make everything in common_probe() devm managed
so no need to call common_remove() in here and hence nothing to do.

> + if (ret != 0)
> + dev_err(&spi->dev, "Error while removing general driver\n.");

Report any errors in the common code or you will have to duplicate this which
doesn't add anything.

> +}
> +
> +static const struct of_device_id ads7038_of_spi_match[] = {
> + {.compatible = "ti,ads7038" },
> + { },

No need for comma on a terminating entry as we will never add anything after it!

> +};
> +
> +MODULE_DEVICE_TABLE(of, ads7038_of_spi_match);
> +
> +const struct spi_device_id ads7038_spi_id[] = {
> + {.name = "ads7038" },
> + { },
> +};
> +
> +MODULE_DEVICE_TABLE(spi, ads7038_spi_id);
> +
> +static struct spi_driver ads7038_spi_driver = {
> + .driver = {
> + .name = "ads7038-spi",
> + .of_match_table = ads7038_of_spi_match,
> + },
Indent should be
},
> + .id_table = ads7038_spi_id,
> + .probe = ads7038_spi_probe,
> + .remove = ads7038_spi_remove,
> +};
> +
> +module_spi_driver(ads7038_spi_driver);
> +
> +MODULE_AUTHOR("Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("ADS7038 SPI bus driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/iio/adc/ti-ads7038.h b/drivers/iio/adc/ti-ads7038.h
> new file mode 100644
> index 000000000000..7df41425d7d3
> --- /dev/null
> +++ b/drivers/iio/adc/ti-ads7038.h
> @@ -0,0 +1,551 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/*
> + * This driver supports TI 12Bit ADC devices
> + *
> + * - ADS7038 with SPI interface
> + * - ADS7138 with I2C interface (future)

Add this comment when it does support the I2C part...

> + *
> + * Copyright (C) 2023 SYS TEC electronic AG
> + * Author: Andre Werner <andre.werner@xxxxxxxxxxxxxxxxxxxxx>
> + */
> +#include <linux/bitops.h>
> +#include <linux/mutex.h>
> +#include <linux/types.h>
> +
> +#ifndef IIO_TI_ADS7038_H_
> +#define IIO_TI_ADS7038_H_
> +
> +#define ADS7038_REGISTER_SIZE 8 /* bits */
Name it so that's obviously

ADS7038_REGISTER_NUM_BITS 8

> +
> +/* Opcodes for commands */
> +#define ADS7038_OP_NOOP 0x00
> +#define ADS7038_OP_REG_READ 0x10
> +#define ADS7038_OP_REG_WRITE 0x08
> +#define ADS7038_OP_SET_BIT 0x18
> +#define ADS7038_OP_CLEAR_BIT 0x20
> +
> +/* ADS7038 System Status Register */
Naming makes that obvious, so drop the comment.
Same for other obvious ones...

> +#define ADS7038_SYSTEM_STATUS_REG 0x00
> +#define ADS7038_SYSTEM_STATUS_BOR BIT(0)
> +#define ADS7038_SYSTEM_STATUS_CRC_ERROR_IN BIT(1)
> +#define ADS7038_SYSTEM_STATUS_CRC_ERROR_FUSE BIT(2)
> +#define ADS7038_SYSTEM_STATUS_OSR_DONE BIT(3)
> +#define ADS7038_SYSTEM_STATUS_OSR_SEQ_STATUS BIT(6)
> +
> +/* ADS7038 General Configuration Register */
> +#define ADS7038_GENERAL_CFG_REG 0x01
> +#define ADS7038_GENERAL_CFG_RST BIT(0)
> +#define ADS7038_GENERAL_CFG_CAL BIT(1)
> +#define ADS7038_GENERAL_CFG_CH_RST BIT(2)
> +#define ADS7038_GENERAL_CFG_DWC_EN BIT(4)
> +#define ADS7038_GENERAL_CFG_STATS_EN BIT(5)
> +#define ADS7038_GENERAL_CFG_CRC_EN BIT(6)
> +
> +/* ADS7038 Data Configuration Register */
> +#define ADS7038_DATA_CFG_REG 0x02
> +#define ADS7038_DATA_CFG_CPOL_CPHA GENMASK(1, 0)
> +#define ADS7038_DATA_CFG_CPOL_CPHA_SPI00 0x00 /* solely ADS7038 */
> +#define ADS7038_DATA_CFG_CPOL_CPHA_SPI01 0x01 /* solely ADS7038 */
> +#define ADS7038_DATA_CFG_CPOL_CPHA_SPI10 0x02 /* solely ADS7038 */
> +#define ADS7038_DATA_CFG_CPOL_CPHA_SPI11 0x03 /* solely ADS7038 */
> +#define ADS7038_DATA_CFG_APPEND_STATUS GENMASK(5, 4)
> +#define ADS7038_DATA_CFG_APPEND_STATUS_NO 0x00
> +#define ADS7038_DATA_CFG_APPEND_STATUS_CHID BIT(4)
> +#define ADS7038_DATA_CFG_APPEND_STATUS_STATUS BIT(5)
> +#define ADS7038_DATA_CFG_FIX_PAT BIT(7)
> +
> +/* ADS7038 Oversampling Configuration Register */
> +#define ADS7038_OSR_CFG_REG 0x03
> +#define ADS7038_OSR_CFG_OSR GENMASK(2, 0)
> +#define ADS7038_OSR_CFG_OSR_NO 0x00
> +#define ADS7038_OSR_CFG_OSR_2 0x01
> +#define ADS7038_OSR_CFG_OSR_4 0x02
> +#define ADS7038_OSR_CFG_OSR_8 0x03
> +#define ADS7038_OSR_CFG_OSR_16 0x04
> +#define ADS7038_OSR_CFG_OSR_32 0x05
> +#define ADS7038_OSR_CFG_OSR_64 0x06
> +#define ADS7038_OSR_CFG_OSR_128 0x07
> +
> +/* ADS7038 Operation Mode Configuration Register */
> +#define ADS7038_OPMODE_CFG_REG 0x04
> +#define ADS7038_OPMODE_CFG_CLK_DIV GENMASK(3, 0)
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_1US0 0x00
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_1US5 0x01
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_2US0 0x02
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_3US0 0x03
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_4US0 0x04
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_6US0 0x05
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_8US0 0x06
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_12US0 0x07
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_16US0 0x08
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_24US0 0x09
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_32US0 0x0A
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_48US0 0x0B
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_64US0 0x0C
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_96US0 0x0D
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_128US0 0x0E
> +#define ADS7038_OPMODE_CFG_CLK_DIV_FTIME_192US0 0x0F
> +#define ADS7038_OPMODE_CFG_OSC_SEL BIT(4)
> +#define ADS7038_OPMODE_CFG_OSC_SEL_HIGHSPEED 0x00
> +#define ADS7038_OPMODE_CFG_OSC_SEL_LOWSPEED 0x01
> +#define ADS7038_OPMODE_CFG_CONV_MODE GENMASK(6, 5)
> +#define ADS7038_OPMODE_CFG_CONV_MODE_MANUAL 0x00
> +#define ADS7038_OPMODE_CFG_CONV_MODE_AUTONOMOUS BIT(5)
> +#define ADS7038_OPMODE_CFG_CONV_ON_ERR BIT(7)
> +#define ADS7038_OPMODE_CFG_CONV_ON_ERR_CONTINUE 0x00
> +#define ADS7038_OPMODE_CFG_CONV_ON_ERR_PAUSE BIT(7)
> +
> +/* ADS7038 Pin Mode Configuration Register */
> +#define ADS7038_PIN_CFG_REG 0x05
> +#define ADS7038_PIN_CFG_ALL_AIN 0x00
> +#define ADS7038_PIN_CFG_ALL_GPIO GENMASK(7, 0)
> +
> +/* ADS7038 GPIO Mode Configuration Register */
> +#define ADS7038_GPIO_CFG_REG 0x07
> +#define ADS7038_GPIO_CFG_ALL_IN 0x00
> +#define ADS7038_GPIO_CFG_ALL_OUT GENMASK(7, 0)
> +
> +/* ADS7038 GPO Drive Strengh Configuration Register */
> +#define ADS7038_GPO_DRIVE_CFG_REG 0x09
> +#define ADS7038_GPO_DRIVE_CFG_ALL_OPEN_DRAIN 0x00
> +#define ADS7038_GPO_DRIVE_CFG_ALL_PP GENMASK(7, 0)
> +
> +/* ADS7038 GPO Value Register */
> +#define ADS7038_GPO_VALUE_REG 0x0B
> +#define ADS7038_GPO_VALUE_ALL_LOW 0x00
> +#define ADS7038_GPO_VALUE_ALL_HIGH GENMASK(7, 0)
> +
> +/* ADS7038 GPI Value Register */
> +#define ADS7038_GPI_VALUE_REG 0x0D
> +
> +/* ADS7038 Sequence Configuration Register */
> +#define ADS7038_SEQUENCE_CFG_REG 0x10
> +#define ADS7038_SEQUENCE_CFG_SEQ_MODE GENMASK(1, 0)
> +#define ADS7038_SEQUENCE_CFG_SEQ_MODE_MANUAL 0x00
> +#define ADS7038_SEQUENCE_CFG_SEQ_MODE_AUTO_SEQ 0x01
> +#define ADS7038_SEQUENCE_CFG_SEQ_MODE_ON_THE_FLY 0x02 /* solely ADS7038 */
> +#define ADS7038_SEQUENCE_CFG_SEQ_START BIT(4)
> +
> +/* ADS7038 Channel Selection Register */
> +#define ADS7038_CHANNEL_SEL_REG 0x11
> +#define ADS7038_CHANNEL_SEL_MCHILDID GENMASK(3, 0)
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN0 0x00
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN1 0x01
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN2 0x02
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN3 0x03
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN4 0x04
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN5 0x05
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN6 0x06
> +#define ADS7038_CHANNEL_SEL_MCHILDID_AIN7 0x07
> +
> +/* ADS7038 Auto Sequence Channel Selection Register */
> +#define ADS7038_AUTO_SEQ_CH_SEL_REG 0x12
> +#define ADS7038_AUTO_SEQ_CH_SEL_ALL GENMASK(7, 0)
> +
> +/* ADS7038 Alert Channel Selection Register */
> +#define ADS7038_ALERT_CH_SEL_REG 0x14
> +#define ADS7038_ALERT_CH_SEL_ALL GENMASK(7, 0)
> +
> +/* ADS7038 Alert Map Register */
> +#define ADS7038_ALERT_MAP_REG 0x16
> +#define ADS7038_ALERT_MAP_ALERT_CRCIN BIT(0)
> +
> +/* ADS7038 Alert Pin Configuration Register */
> +#define ADS7038_ALERT_PIN_CFG_REG 0x17
> +#define ADS7038_ALERT_PIN_CFG_ALERT_LOGIC GENMASK(1, 0)
> +#define ADS7038_ALERT_PIN_CFG_ALERT_LOGIC_ACTIVE_LOW 0x00
> +#define ADS7038_ALERT_PIN_CFG_ALERT_LOGIC_ACTIVE_HIGH BIT(0)
> +#define ADS7038_ALERT_PIN_CFG_ALERT_LOGIC_PULSED_LOW BIT(1)
> +#define ADS7038_ALERT_PIN_CFG_ALERT_LOGIC_PULSED_HIGH GENMASK(1, 0)
> +#define ADS7138_ALERT_PIN_CFG_ALERT_DRIVE BIT(2) /* solely ADS7138 */
> +#define ADS7038_ALERT_PIN_CFG_ALERT_PIN 0xF0 /* solely ADS7038 */
> +
> +/* ADS7038 Event Flag Register */
> +#define ADS7038_EVENT_FLAG_REG 0x18
> +
> +/* ADS7038 Event High Flag Register */
> +#define ADS7038_EVENT_HIGH_FLAG_REG 0x1A
> +
> +/* ADS7038 Event Low Flag Register */
> +#define ADS7038_EVENT_LOW_FLAG_REG 0x1C
> +
> +/* ADS7038 Event Region Register */
> +#define ADS7038_EVENT_RGN_REG 0x1E
> +
> +/* ADS7038 HYSTERESIS CH0 Register */
> +#define ADS7038_HYSTERESIS_CH0_REG 0x20
> +#define ADS7038_HYSTERESIS_CH0_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH0_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH0 Register */
> +#define ADS7038_HIGH_TH_CH0_REG 0x21
> +
> +/* ADS7038 Event Count CH0 Register */
> +#define ADS7038_EVENT_CNT_CH0_REG 0x22
> +#define ADS7038_EVENT_CNT_CH0_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH0_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH0 Register */
> +#define ADS7038_LOW_TH_CH0_REG 0x23
> +
> +/* ADS7038 HYSTERESIS CH1 Register */
> +#define ADS7038_HYSTERESIS_CH1_REG 0x24
> +#define ADS7038_HYSTERESIS_CH1_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH1_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH1 Register */
> +#define ADS7038_HIGH_TH_CH1_REG 0x25
> +
> +/* ADS7038 Event Count CH1 Register */
> +#define ADS7038_EVENT_CNT_CH1_REG 0x26
> +#define ADS7038_EVENT_CNT_CH1_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH1_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH1 Register */
> +#define ADS7038_LOW_TH_CH1_REG 0x27
> +
> +/* ADS7038 HYSTERESIS CH2 Register */
> +#define ADS7038_HYSTERESIS_CH2_REG 0x28
> +#define ADS7038_HYSTERESIS_CH2_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH2_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH2 Register */
> +#define ADS7038_HIGH_TH_CH2_REG 0x29
> +
> +/* ADS7038 Event Count CH2 Register */
> +#define ADS7038_EVENT_CNT_CH2_REG 0x2A
> +#define ADS7038_EVENT_CNT_CH2_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH2_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH2 Register */
> +#define ADS7038_LOW_TH_CH2_REG 0x2B
> +
> +/* ADS7038 HYSTERESIS CH3 Register */
> +#define ADS7038_HYSTERESIS_CH3_REG 0x2C
> +#define ADS7038_HYSTERESIS_CH3_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH3_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH3 Register */
> +#define ADS7038_HIGH_TH_CH3_REG 0x2D
> +
> +/* ADS7038 Event Count CH3 Register */
> +#define ADS7038_EVENT_CNT_CH3_REG 0x2E
> +#define ADS7038_EVENT_CNT_CH3_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH3_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH3 Register */
> +#define ADS7038_LOW_TH_CH3_REG 0x2F
> +
> +/* ADS7038 HYSTERESIS CH4 Register */
> +#define ADS7038_HYSTERESIS_CH4_REG 0x30
> +#define ADS7038_HYSTERESIS_CH4_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH4_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH4 Register */
> +#define ADS7038_HIGH_TH_CH4_REG 0x31
> +
> +/* ADS7038 Event Count CH4 Register */
> +#define ADS7038_EVENT_CNT_CH4_REG 0x32
> +#define ADS7038_EVENT_CNT_CH4_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH4_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH4 Register */
> +#define ADS7038_LOW_TH_CH4_REG 0x33
> +
> +/* ADS7038 HYSTERESIS CH5 Register */
> +#define ADS7038_HYSTERESIS_CH5_REG 0x34
> +#define ADS7038_HYSTERESIS_CH5_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH5_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH5 Register */
> +#define ADS7038_HIGH_TH_CH5_REG 0x35
> +
> +/* ADS7038 Event Count CH5 Register */
> +#define ADS7038_EVENT_CNT_CH5_REG 0x36
> +#define ADS7038_EVENT_CNT_CH5_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH5_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH5 Register */
> +#define ADS7038_LOW_TH_CH5_REG 0x37
> +
> +/* ADS7038 HYSTERESIS CH6 Register */
> +#define ADS7038_HYSTERESIS_CH6_REG 0x38
> +#define ADS7038_HYSTERESIS_CH6_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH6_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH6 Register */
> +#define ADS7038_HIGH_TH_CH6_REG 0x39
> +
> +/* ADS7038 Event Count CH6 Register */
> +#define ADS7038_EVENT_CNT_CH6_REG 0x3A
> +#define ADS7038_EVENT_CNT_CH6_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH6_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH6 Register */
> +#define ADS7038_LOW_TH_CH6_REG 0x3B
> +
> +/* ADS7038 HYSTERESIS CH7 Register */
> +#define ADS7038_HYSTERESIS_CH7_REG 0x3C
> +#define ADS7038_HYSTERESIS_CH7_HYSTERESIS_CH0 GENMASK(3, 0)
> +#define ADS7038_HYSTERESIS_CH7_HIGH_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH7 Register */
> +#define ADS7038_HIGH_TH_CH7_REG 0x3D
> +
> +/* ADS7038 Event Count CH7 Register */
> +#define ADS7038_EVENT_CNT_CH7_REG 0x3E
> +#define ADS7038_EVENT_CNT_CH7_EVENT_CNT_CH0 GENMASK(3, 0)
> +#define ADS7038_EVENT_CNT_CH7_LOW_THRESHOLD_CH0_LSB GENMASK(7, 4)
> +
> +/* ADS7038 High Threshold CH7 Register */
> +#define ADS7038_LOW_TH_CH7_REG 0x3F
> +
> +/* ADS7038 MAX CH0 LSB Register */
> +#define ADS7038_MAX_CH0_LSB_REG 0x60
The define provides the same information as the comment (which is
good btw) Comments that add no value, should not be there. Hence
delete all these register descriptions unless they add some additional
significant information.

...

> +/* Channel IDs to use for manual mode */
> +enum MANUAL_CHID {
> + AIN0 = ADS7038_CHANNEL_SEL_MCHILDID_AIN0,
> + AIN1 = ADS7038_CHANNEL_SEL_MCHILDID_AIN1,
> + AIN2 = ADS7038_CHANNEL_SEL_MCHILDID_AIN2,
> + AIN3 = ADS7038_CHANNEL_SEL_MCHILDID_AIN3,
> + AIN4 = ADS7038_CHANNEL_SEL_MCHILDID_AIN4,
> + AIN5 = ADS7038_CHANNEL_SEL_MCHILDID_AIN5,
> + AIN6 = ADS7038_CHANNEL_SEL_MCHILDID_AIN6,
> + AIN7 = ADS7038_CHANNEL_SEL_MCHILDID_AIN7,
> + AIN_MAX,
> +};
> +
> +/* Functional Modes */
> +enum FUNC_MODE {
> + MAN = 0,
> + ON_THE_FLY,
> + AUTO_SEQ,
> + AUTO,
> +};
> +
> +struct ads7038_ch_meas_result {
> + unsigned int raw;
> + unsigned int status;
> + u8 faverage; /* Flag indicates average result */
> + u8 fstatus; /* Flag indicated if status is appended */
bool for flags and name them so the comments aren't needed. Given status is
above and my guess for the meaning of faverage.

bool status_valid;
bool raw_is_an_average;


> +};
> +
> +struct device;
> +struct iio_dev;
> +struct regmap;
> +struct regulator;
> +
> +/* Functions to address registers and */
> +struct ads7038_info {

Using regmap and still needing callbacks for read_reg etc seems decidely
odd.. Those should be handled via the regmap configuration.

At the moment you have abstraction in here to support the i2c device
but I'd like to either see that code added as part of this patch series,
or the abstraction removed for now so we get one clean driver.
The complexity can then be brought in as a precursor patch for the
i2c driver.


> + /* Address configuration registers of IC */
> + int (*read_reg)(struct device *dev, const unsigned int reg,
> + unsigned int *val);
> + int (*write_reg)(struct device *dev, const unsigned int reg,
> + unsigned int val);
> + /* Perform a single read of a channel */
> + int (*read_channel)(struct iio_dev *indio_dev,
> + const enum MANUAL_CHID chan,
> + struct ads7038_ch_meas_result *const res);
> +};
> +
> +struct ads7038_data {
> + struct device *dev;
> + const struct ads7038_info *info;
> + struct regmap *regmap;
> +
> + enum FUNC_MODE func_mode; /* actual measure mode */
> + u8 faverage; /* flag indicates averaging enabled */
> + u8 fstatus; /* flag indicates status appended */
> +
> + struct mutex lock; /* Mutex for single communication resource */
> +
> + struct regulator *reg; /* Regulator that controls ADC reference voltage */
> +};
> +
> +/* Regmap configurations */

Obvious so drop comment.

> +extern const struct regmap_config ads7038_regmap_config;
> +
> +/* Probe called from different transports */
This is fairly obvious, so I'd drop the comment.
> +int ads7038_common_probe(struct device *parent, const struct ads7038_info *info,
> + struct regmap *const regmap,
> + struct regulator *const ref_voltage_reg,
> + const char *name, const int irq);
> +
> +int ads7038_common_remove(struct device *parent);
> +
> +#endif