[PATCH] staging: rtl8192u: Align descendant arguments
From: Gilbert Adikankwu
Date: Sun Oct 15 2023 - 03:55:01 EST
Adhere to Linux kernel coding style.
"...A very commonly used style is to align descendants to a function
open parenthesis" - (Excerpted from Linux kernel coding style (#2))
Reported by checkpatch:
CHECK: Alignment should match open parenthesis
Signed-off-by: Gilbert Adikankwu <gilbertadikankwu@xxxxxxxxx>
---
drivers/staging/rtl8192u/r8180_93cx6.c | 4 ++--
drivers/staging/rtl8192u/r8190_rtl8256.c | 16 +++++++--------
drivers/staging/rtl8192u/r8192U_core.c | 20 +++++++++---------
drivers/staging/rtl8192u/r8192U_dm.c | 24 +++++++++++-----------
drivers/staging/rtl8192u/r819xU_firmware.c | 4 ++--
drivers/staging/rtl8192u/r819xU_phy.c | 2 +-
6 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c
index 2527cea60e3e..1453a0307eb4 100644
--- a/drivers/staging/rtl8192u/r8180_93cx6.c
+++ b/drivers/staging/rtl8192u/r8180_93cx6.c
@@ -114,7 +114,7 @@ int eprom_read(struct net_device *dev, u32 addr)
ret = 0;
/* enable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
+ (EPROM_CMD_PROGRAM << EPROM_CMD_OPERATING_MODE_SHIFT));
force_pci_posting(dev);
udelay(EPROM_DELAY);
@@ -165,6 +165,6 @@ int eprom_read(struct net_device *dev, u32 addr)
/* disable EPROM programming */
write_nic_byte_E(dev, EPROM_CMD,
- (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
+ (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
return ret;
}
diff --git a/drivers/staging/rtl8192u/r8190_rtl8256.c b/drivers/staging/rtl8192u/r8190_rtl8256.c
index 54747fda552f..a81e88894e01 100644
--- a/drivers/staging/rtl8192u/r8190_rtl8256.c
+++ b/drivers/staging/rtl8192u/r8190_rtl8256.c
@@ -46,17 +46,17 @@ void phy_set_rf8256_bandwidth(struct net_device *dev, enum ht_channel_width Band
priv->card_8192_version == VERSION_819XU_B) {
/* 8256 D-cut, E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
+ (enum rf90_radio_path_e)eRFPath,
+ 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x2c, bMask12Bits, 0x3d7);
+ (enum rf90_radio_path_e)eRFPath,
+ 0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x0e, bMask12Bits, 0x021);
+ (enum rf90_radio_path_e)eRFPath,
+ 0x0e, bMask12Bits, 0x021);
rtl8192_phy_SetRFReg(dev,
- (enum rf90_radio_path_e)eRFPath,
- 0x14, bMask12Bits, 0x5ab);
+ (enum rf90_radio_path_e)eRFPath,
+ 0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR, "%s(): unknown hardware version\n", __func__);
}
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index 0a60ef20107c..2985c4f05bc8 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -2236,7 +2236,7 @@ static int rtl8192_read_eeprom_info(struct net_device *dev)
*((u16 *)(&priv->EEPROMTxPowerLevelCCK_V1[1])) = tmpValue;
if (bLoad_From_EEPOM)
tmpValue = eprom_read(dev,
- EEPROM_TX_PW_INDEX_OFDM_24G_V1 >> 1);
+ EEPROM_TX_PW_INDEX_OFDM_24G_V1 >> 1);
else
tmpValue = 0x1010;
*((u16 *)(&priv->EEPROMTxPowerLevelOFDM24G[0])) = tmpValue;
@@ -2536,16 +2536,16 @@ static bool rtl8192_adapter_start(struct net_device *dev)
/* Initialize Number of Reserved Pages in Firmware Queue */
write_nic_dword(dev, RQPN1,
- NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_VO << RSVD_FW_QUEUE_PAGE_VO_SHIFT);
+ NUM_OF_PAGE_IN_FW_QUEUE_BK << RSVD_FW_QUEUE_PAGE_BK_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_BE << RSVD_FW_QUEUE_PAGE_BE_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VI << RSVD_FW_QUEUE_PAGE_VI_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_VO << RSVD_FW_QUEUE_PAGE_VO_SHIFT);
write_nic_dword(dev, RQPN2,
- NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
- NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
+ NUM_OF_PAGE_IN_FW_QUEUE_MGNT << RSVD_FW_QUEUE_PAGE_MGNT_SHIFT |
+ NUM_OF_PAGE_IN_FW_QUEUE_CMD << RSVD_FW_QUEUE_PAGE_CMD_SHIFT);
write_nic_dword(dev, RQPN3,
- APPLIED_RESERVED_QUEUE_IN_FW |
- NUM_OF_PAGE_IN_FW_QUEUE_BCN << RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
+ APPLIED_RESERVED_QUEUE_IN_FW |
+ NUM_OF_PAGE_IN_FW_QUEUE_BCN << RSVD_FW_QUEUE_PAGE_BCN_SHIFT);
write_nic_dword(dev, RATR0 + 4 * 7, (RATE_ALL_OFDM_AG | RATE_ALL_CCK));
/* Set AckTimeout */
@@ -3019,7 +3019,7 @@ static void rtl819x_ifsilentreset(struct net_device *dev)
}
static void rtl819x_update_rxcounts(struct r8192_priv *priv, u32 *TotalRxBcnNum,
- u32 *TotalRxDataNum)
+ u32 *TotalRxDataNum)
{
u16 SlotIndex;
u16 i;
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index cbae852478ea..84c2ad89f02c 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -331,7 +331,7 @@ static void dm_check_rate_adaptive(struct net_device *dev)
if (pra->ping_rssi_enable) {
if (priv->undecorated_smoothed_pwdb < (long)(pra->ping_rssi_thresh_for_ra+5)) {
if ((priv->undecorated_smoothed_pwdb < (long)pra->ping_rssi_thresh_for_ra) ||
- ping_rssi_state) {
+ ping_rssi_state) {
pra->ratr_state = DM_RATR_STA_LOW;
targetRATR = pra->ping_rssi_ratr;
ping_rssi_state = 1;
@@ -612,7 +612,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
if (tmpRegA == OFDMSwingTable[i]) {
priv->OFDM_index = (u8)i;
RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, OFDM_index=0x%x\n",
- rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index);
+ rOFDM0_XATxIQImbalance, tmpRegA, priv->OFDM_index);
}
}
@@ -622,7 +622,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
if (TempCCk == (u32)CCKSwingTable_Ch1_Ch13[i][0]) {
priv->CCK_index = (u8) i;
RT_TRACE(COMP_POWER_TRACKING, "Initial reg0x%x = 0x%x, CCK_index=0x%x\n",
- rCCK0_TxFilter1, TempCCk, priv->CCK_index);
+ rCCK0_TxFilter1, TempCCk, priv->CCK_index);
break;
}
}
@@ -695,7 +695,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev)
priv->OFDM_index = tmpOFDMindex;
rtl8192_setBBreg(dev, rOFDM0_XATxIQImbalance, bMaskDWord, OFDMSwingTable[priv->OFDM_index]);
RT_TRACE(COMP_POWER_TRACKING, "Update OFDMSwing[%d] = 0x%x\n",
- priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
+ priv->OFDM_index, OFDMSwingTable[priv->OFDM_index]);
}
priv->txpower_count = 0;
}
@@ -1352,7 +1352,7 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][1]<<8);
rtl8192_setBBreg(dev, rCCK0_TxFilter1, bMaskHWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
- rCCK0_TxFilter1, TempVal);
+ rCCK0_TxFilter1, TempVal);
/* Write 0xa24 ~ 0xa27 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][2] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][3]<<8) +
@@ -1360,14 +1360,14 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCH
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][5]<<24);
rtl8192_setBBreg(dev, rCCK0_TxFilter2, bMaskDWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
- rCCK0_TxFilter2, TempVal);
+ rCCK0_TxFilter2, TempVal);
/* Write 0xa28 0xa29 */
TempVal = CCKSwingTable_Ch1_Ch13[priv->CCK_index][6] +
(CCKSwingTable_Ch1_Ch13[priv->CCK_index][7]<<8);
rtl8192_setBBreg(dev, rCCK0_DebugPort, bMaskLWord, TempVal);
RT_TRACE(COMP_POWER_TRACKING, "CCK not chnl 14, reg 0x%x = 0x%x\n",
- rCCK0_DebugPort, TempVal);
+ rCCK0_DebugPort, TempVal);
} else {
/* Write 0xa22 0xa23 */
TempVal = CCKSwingTable_Ch14[priv->CCK_index][0] +
@@ -1764,7 +1764,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
/* For smooth, we can not change high power DIG state in the range. */
if ((priv->undecorated_smoothed_pwdb > dm_digtable.rssi_high_power_lowthresh) &&
- (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
+ (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_highthresh))
return;
/* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if
@@ -1790,7 +1790,7 @@ static void dm_ctrl_initgain_byrssi_highpwr(
dm_digtable.dig_highpwr_state = DM_STA_DIG_OFF;
if (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_power_lowthresh &&
- priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
+ priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) {
/* 3.2 Recover PD_TH for OFDM for normal power region. */
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
write_nic_byte(dev, (rOFDM0_XATxAFE+3), 0x20);
@@ -1881,7 +1881,7 @@ static void dm_pd_th(
else if (dm_digtable.rssi_val <= dm_digtable.rssi_low_thresh)
dm_digtable.curpd_thstate = DIG_PD_AT_LOW_POWER;
else if ((dm_digtable.rssi_val >= dm_digtable.rssi_high_thresh) &&
- (dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
+ (dm_digtable.rssi_val < dm_digtable.rssi_high_power_lowthresh))
dm_digtable.curpd_thstate = DIG_PD_AT_NORMAL_POWER;
else
dm_digtable.curpd_thstate = dm_digtable.prepd_thstate;
@@ -2620,7 +2620,7 @@ void dm_check_fsync(struct net_device *dev)
RT_TRACE(COMP_HALDM, "RateBitmap 0x%x FirstDiffRateThreshold %d SecondDiffRateThreshold %d\n", priv->ieee80211->fsync_rate_bitmap, priv->ieee80211->fsync_firstdiff_ratethreshold, priv->ieee80211->fsync_seconddiff_ratethreshold);
if (priv->ieee80211->state == IEEE80211_LINKED &&
- (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC)) {
+ (priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_CDD_FSYNC)) {
if (priv->ieee80211->bfsync_enable == 0) {
switch (priv->ieee80211->fsync_state) {
case Default_Fsync:
@@ -2779,7 +2779,7 @@ static void dm_dynamic_txpower(struct net_device *dev)
}
if ((priv->bDynamicTxHighPower != priv->bLastDTPFlag_High) ||
- (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low)) {
+ (priv->bDynamicTxLowPower != priv->bLastDTPFlag_Low)) {
RT_TRACE(COMP_TXAGC, "SetTxPowerLevel8190() channel = %d\n", priv->ieee80211->current_network.channel);
#if defined(RTL8190P) || defined(RTL8192E)
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c
index 4f8629e47e82..c515b4773e37 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -88,8 +88,8 @@ static bool fw_download_code(struct net_device *dev, u8 *code_virtual_address,
index = tcb_desc->queue_index;
if (!priv->ieee80211->check_nic_enough_desc(dev, index) ||
- (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
- (priv->ieee80211->queue_stop)) {
+ (!skb_queue_empty(&priv->ieee80211->skb_waitQ[index])) ||
+ (priv->ieee80211->queue_stop)) {
RT_TRACE(COMP_FIRMWARE, "=====================================================> tx full!\n");
skb_queue_tail(&priv->ieee80211->skb_waitQ[tcb_desc->queue_index], skb);
} else {
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index e6836eacc7aa..c61a29976e9a 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -875,7 +875,7 @@ void rtl8192_phy_getTxPower(struct net_device *dev)
read_nic_byte(dev, rOFDM0_RxDetector2, &tmp);
priv->framesyncC34 = tmp;
RT_TRACE(COMP_INIT, "Default framesync (0x%x) = 0x%x\n",
- rOFDM0_RxDetector3, priv->framesync);
+ rOFDM0_RxDetector3, priv->framesync);
/* Read SIFS (save the value read fome MACPHY_REG.txt) */
read_nic_word(dev, SIFS, &priv->SifsTime);
--
2.34.1