Re: [PATCH] PCI: pciehp: Prevent child devices from doing RPM on PCIe Link Down
From: Lukas Wunner
Date: Thu Oct 19 2023 - 10:35:19 EST
On Thu, Oct 19, 2023 at 01:49:50AM +0000, Ricky WU wrote:
> [ 0.267813] pci 0000:00:1c.0: [8086:a33c] type 01 class 0x060400
Cannon Lake PCH Root Port
> [ 0.275241] pci 0000:01:00.0: [10ec:5261] type 00 class 0xff0000
> [ 0.275315] pci 0000:01:00.0: reg 0x10: [mem 0xa3b00000-0xa3b00fff]
> [ 0.275782] pci 0000:01:00.0: supports D1 D2
> [ 0.275784] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.276490] pci 0000:00:1c.0: PCI bridge to [bus 01]
Device below Root Port is initially a Realtek RTS5261 card reader.
> [ 0.395968] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
> [ 0.396009] pcieport 0000:00:1c.0: pciehp: Slot #8 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+
Root Port is hotplug-capable.
> [ 43.180701] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down
> [ 43.180709] pcieport 0000:00:1c.0: pciehp: Slot(8): Card not present
> [ 44.403768] pcieport 0000:00:1c.0: pciehp: Slot(8): Card present
> [ 44.403772] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Up
> [ 44.540631] pci 0000:01:00.0: [15b7:5007] type 00 class 0x010802
Card reader is unplugged and replaced by SanDisk SN530 NVMe SSD.
> [ 51.682628] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down
> [ 51.716800] nvme0n1: detected capacity change from 495050752 to 0
> [ 51.793382] pcieport 0000:00:1c.0: pciehp: Slot(8): Card present
> [ 51.793392] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Up
> [ 51.928633] pci 0000:01:00.0: [10ec:5261] type 00 class 0xff0000
NVMe SSD replaced by the card reader again.
> [ 54.872928] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down
> [ 56.146581] pcieport 0000:00:1c.0: pciehp: Slot(8): Card present
> [ 56.146584] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Up
> [ 56.284632] pci 0000:01:00.0: [15b7:5007] type 00 class 0x010802
Card reader replaced by NVMe SSD, second time.
> [ 60.635845] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down
> [ 60.676842] nvme0n1: detected capacity change from 495050752 to 0
> [ 60.748953] pcieport 0000:00:1c.0: pciehp: Slot(8): Card present
> [ 60.748958] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Up
> [ 60.884619] pci 0000:01:00.0: [10ec:5261] type 00 class 0xff0000
NVMe SSD replaced by the card reader, second time.
> [ 63.898861] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down
> [ 63.912118] BUG: unable to handle page fault for address: ffffb24d403e5010
Card reader replaced with NVMe SSD, third time.
So it took three tries to reproduce the page fault.
Thanks for the log, the issue is a little less murky now.
But it's still unclear what the root cause is and thus
what the proper solution is. I think this needs more
in-depth debugging, see my previous e-mail.
Hope that helps! Thanks,
Lukas