Re: [PATCH] ARM: dts: qcom: Add LPG LED device description

From: Dmitry Baryshkov
Date: Wed Nov 08 2023 - 01:59:26 EST


On Wed, 8 Nov 2023 at 08:05, Hui Liu via B4 Relay
<devnull+quic_huliu.quicinc.com@xxxxxxxxxx> wrote:
>
> From: Hui Liu <quic_huliu@xxxxxxxxxxx>
>
> Add LPG LED device description.

No. You are not adding "LPG LED device description". You are adding
definition for three LEDs.

>
> Signed-off-by: Hui Liu <quic_huliu@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/pm8350c.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/pm8350c.dtsi b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> index f28e71487d5c..11b9f384d99c 100644
> --- a/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pm8350c.dtsi
> @@ -4,6 +4,7 @@
> */
>
> #include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/leds/common.h>
> #include <dt-bindings/spmi/spmi.h>
>
> &spmi_bus {
> @@ -34,6 +35,27 @@ pm8350c_pwm: pwm {
> compatible = "qcom,pm8350c-pwm";
> #pwm-cells = <2>;
> status = "disabled";
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led@1 {
> + reg = <1>;
> + color = <LED_COLOR_ID_RED>;
> + label = "red";
> + };
> +
> + led@2 {
> + reg = <2>;
> + color = <LED_COLOR_ID_GREEN>;
> + label = "green";
> + };
> +
> + led@3 {
> + reg = <3>;
> + color = <LED_COLOR_ID_BLUE>;
> + label = "blue";

... and these particular LEDs are board-specific. Please fill them in
the board file instead.

> + };
> };
> };
> };
>
> ---
> base-commit: b9604be241587fb29c0f40450e53d0a37dc611b5
> change-id: 20231108-qcom_leds-c3b0b7029008
>
> Best regards,
> --
> Hui Liu <quic_huliu@xxxxxxxxxxx>
>
>


--
With best wishes
Dmitry