Re: [PATCH v4 net-next 0/5] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY

[Heiner Kallweit]

On 08.01.2024 10:36, Dimitri Fedrau wrote:
> Changes in v2:
> 	- used defines MDIO_CTRL1_LPOWER and MDIO_PMA_CTRL1_SPEED1000
> 	  in mv88q222x_config_aneg_preinit
> 	- use genphy_c45_loopback
> 	- mv88q2xxx_read_status reads speed, master or slave state when
> 	  autonegotiation is enabled
> 	- added defines for magic values in mv88q222x_get_sqi
> 
> Changes in v3:
> 	- mv88q2xxx_read_status includes autonegotiation case
> 	- add support for 100BT1 and 1000BT1 linkmode advertisement
> 	- use mv88q2xxx_get_sqi and mv88q2xxx_get_sqi_max, remove
> 	  mv88q222x_get_sqi and mv88q222x_get_sqi_max
> 	- fix typo: rename mv88q2xxxx_get_sqi and mv88q2xxxx_get_sqi_max to
> 	  mv88q2xxx_get_sqi and mv88q2xxx_get_sqi
> 	- add define MDIO_MMD_PCS_MV_RX_STAT for magic value 0x8230, documented
> 	  in latest datasheets for both PHYs
> 
> Changes in V4:
> 	- clean up init sequence
> 	- separate patch for fixing typos in upstreamed code
> 
> Dimitri Fedrau (5):
>   net: phy: Add BaseT1 auto-negotiation constants
>   net: phy: Support 100/1000BT1 linkmode advertisements
>   net: phy: c45: detect 100/1000BASE-T1 linkmode advertisements
>   net: phy: marvell-88q2xxx: fix typos
>   net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
> 
>  drivers/net/phy/marvell-88q2xxx.c | 234 +++++++++++++++++++++++++++---
>  drivers/net/phy/phy-c45.c         |   3 +-
>  include/linux/marvell_phy.h       |   1 +
>  include/linux/mdio.h              |   8 +
>  include/uapi/linux/mdio.h         |   2 +
>  5 files changed, 230 insertions(+), 18 deletions(-)
> 
net-next is closed. Let's see whether the maintainers still accept your series.
Otherwise you may have to resubmit once net-next opens again.