Re: [PATCH 3/6] arm64: dts: qcom: ipq5332: Add MDIO device tree

[Krzysztof Kozlowski]

On 10/01/2024 12:20, Luo Jie wrote:
> Add the MDIO device tree of ipq5332.

Subject: drop "device tree", it is obvious. Commit msg: say something
more instead of copying the subject. Or better squash the entire patch.
> 
> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/ipq5332.dtsi | 44 +++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> index bc89480820cb..e6c780e69d6e 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
> @@ -214,6 +214,38 @@ serial_0_pins: serial0-state {
>  				drive-strength = <8>;
>  				bias-pull-up;
>  			};
> +
> +			mdio0_pins: mdio0-state {
> +				mux_0 {

This wasn't tested...

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).


Best regards,
Krzysztof