Re: [PATCH v2] cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window

[Dan Williams]

Robert Richter wrote:
> On 16.02.24 19:09:30, Robert Richter wrote:
> > On 16.02.24 10:02:51, Dan Williams wrote:
> > > Robert Richter wrote:
> > > > The Linux CXL subsystem is built on the assumption that HPA == SPA.
> > > > That is, the host physical address (HPA) the HDM decoder registers are
> > > > programmed with are system physical addresses (SPA).
> > > > 
> > > > During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1,
> > > > 8.1.3.8) are checked if the memory is enabled and the CXL range is in
> > > > a HPA window that is described in a CFMWS structure of the CXL host
> > > > bridge (cxl-3.1, 9.18.1.3).
> > > > 
> > > > Now, if the HPA is not an SPA, the CXL range does not match a CFMWS
> > > > window and the CXL memory range will be disabled then. The HDM decoder
> > > > stops working which causes system memory being disabled and further a
> > > > system hang during HDM decoder initialization, typically when a CXL
> > > > enabled kernel boots.
> > > > 
> > > > Prevent a system hang and do not disable the HDM decoder if the
> > > > decoder's CXL range is not found in a CFMWS window.
> > > > 
> > > > Note the change only fixes a hardware hang, but does not implement
> > > > HPA/SPA translation. Support for this can be added in a follow on
> > > > patch series.
> > > > 
> 
> Fixes: 9de321e93c3b ("cxl/pci: Refactor cxl_hdm_decode_init()")

This patch just moves the memory-disable call from one place to another.

> Fixes: 34e37b4c432c ("cxl/port: Enable HDM Capability after validating DVSEC Ranges")

This is the proper Fixes tag.

> Cc: stable@xxxxxxxxxxxxxxx

Added.