[PATCH 1/3] ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
From: Luca Weiss
Date: Sun Mar 10 2024 - 07:42:33 EST
In preparation for adding the Sony Xperia Z3 smartphone, split the
common parts into shinano-common.dtsi.
No functional change intended.
Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---
.../qcom-msm8974pro-sony-xperia-shinano-castor.dts | 853 ++++-----------------
...com-msm8974pro-sony-xperia-shinano-common.dtsi} | 155 +---
2 files changed, 169 insertions(+), 839 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
dissimilarity index 74%
index 20f98a9e49ea..727ad5c53e7f 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
@@ -1,686 +1,167 @@
-// SPDX-License-Identifier: GPL-2.0
-#include "qcom-msm8974pro.dtsi"
-#include "pm8841.dtsi"
-#include "pm8941.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-
-/ {
- model = "Sony Xperia Z2 Tablet";
- compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
- chassis-type = "tablet";
-
- aliases {
- mmc0 = &sdhc_1;
- mmc1 = &sdhc_2;
- serial0 = &blsp1_uart2;
- serial1 = &blsp2_uart1;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&gpio_keys_pin_a>;
- pinctrl-names = "default";
-
- key-volume-down {
- label = "volume_down";
- gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEDOWN>;
- debounce-interval = <15>;
- };
-
- key-volume-up {
- label = "volume_up";
- gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_VOLUMEUP>;
- debounce-interval = <15>;
- };
- };
-
- vreg_bl_vddio: lcd-backlight-vddio {
- compatible = "regulator-fixed";
- regulator-name = "vreg_bl_vddio";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- gpio = <&tlmm 69 0>;
- enable-active-high;
-
- vin-supply = <&pm8941_s3>;
- startup-delay-us = <70000>;
-
- pinctrl-0 = <&lcd_backlight_en_pin_a>;
- pinctrl-names = "default";
- };
-
- vreg_vsp: lcd-dcdc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vreg_vsp";
- regulator-min-microvolt = <5600000>;
- regulator-max-microvolt = <5600000>;
-
- gpio = <&pm8941_gpios 20 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&lcd_dcdc_en_pin_a>;
- pinctrl-names = "default";
- };
-
- vreg_boost: vreg-boost {
- compatible = "regulator-fixed";
-
- regulator-name = "vreg-boost";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- regulator-always-on;
- regulator-boot-on;
-
- gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-names = "default";
- pinctrl-0 = <&boost_bypass_n_pin>;
- };
-
- vreg_vph_pwr: vreg-vph-pwr {
- compatible = "regulator-fixed";
- regulator-name = "vph-pwr";
-
- regulator-min-microvolt = <3600000>;
- regulator-max-microvolt = <3600000>;
-
- regulator-always-on;
- };
-
- vreg_wlan: wlan-regulator {
- compatible = "regulator-fixed";
-
- regulator-name = "wl-reg";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- gpio = <&pm8941_gpios 18 GPIO_ACTIVE_HIGH>;
- enable-active-high;
-
- pinctrl-0 = <&wlan_regulator_pin>;
- pinctrl-names = "default";
- };
-};
-
-&blsp1_uart2 {
- status = "okay";
-};
-
-&blsp2_i2c2 {
- clock-frequency = <355000>;
-
- status = "okay";
-
- synaptics@2c {
- compatible = "syna,rmi4-i2c";
- reg = <0x2c>;
-
- interrupt-parent = <&tlmm>;
- interrupts = <86 IRQ_TYPE_EDGE_FALLING>;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
-
- pinctrl-0 = <&ts_int_pin>;
- pinctrl-names = "default";
-
- syna,startup-delay-ms = <100>;
-
- rmi4-f01@1 {
- reg = <0x1>;
- syna,nosleep-mode = <1>;
- };
-
- rmi4-f11@11 {
- reg = <0x11>;
- syna,sensor-type = <1>;
- touchscreen-inverted-x;
- };
- };
-};
-
-&blsp2_i2c5 {
- clock-frequency = <355000>;
-
- status = "okay";
-
- lp8566_wled: backlight@2c {
- compatible = "ti,lp8556";
- reg = <0x2c>;
- power-supply = <&vreg_bl_vddio>;
-
- bl-name = "backlight";
- dev-ctrl = /bits/ 8 <0x05>;
- init-brt = /bits/ 8 <0x3f>;
-
- rom-a0h {
- rom-addr = /bits/ 8 <0xa0>;
- rom-val = /bits/ 8 <0xff>;
- };
- rom-a1h {
- rom-addr = /bits/ 8 <0xa1>;
- rom-val = /bits/ 8 <0x3f>;
- };
- rom-a2h {
- rom-addr = /bits/ 8 <0xa2>;
- rom-val = /bits/ 8 <0x20>;
- };
- rom-a3h {
- rom-addr = /bits/ 8 <0xa3>;
- rom-val = /bits/ 8 <0x5e>;
- };
- rom-a4h {
- rom-addr = /bits/ 8 <0xa4>;
- rom-val = /bits/ 8 <0x02>;
- };
- rom-a5h {
- rom-addr = /bits/ 8 <0xa5>;
- rom-val = /bits/ 8 <0x04>;
- };
- rom-a6h {
- rom-addr = /bits/ 8 <0xa6>;
- rom-val = /bits/ 8 <0x80>;
- };
- rom-a7h {
- rom-addr = /bits/ 8 <0xa7>;
- rom-val = /bits/ 8 <0xf7>;
- };
- rom-a9h {
- rom-addr = /bits/ 8 <0xa9>;
- rom-val = /bits/ 8 <0x80>;
- };
- rom-aah {
- rom-addr = /bits/ 8 <0xaa>;
- rom-val = /bits/ 8 <0x0f>;
- };
- rom-aeh {
- rom-addr = /bits/ 8 <0xae>;
- rom-val = /bits/ 8 <0x0f>;
- };
- };
-};
-
-&blsp2_uart1 {
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <3000000>;
-
- pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
- pinctrl-names = "default";
-
- host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&pm8941_coincell {
- qcom,rset-ohms = <2100>;
- qcom,vset-millivolts = <3000>;
-
- status = "okay";
-};
-
-&pm8941_gpios {
- gpio_keys_pin_a: gpio-keys-active-state {
- pins = "gpio2", "gpio5";
- function = "normal";
- bias-pull-up;
- power-source = <PM8941_GPIO_S3>;
- };
-
- bt_reg_on_pin: bt-reg-on-state {
- pins = "gpio16";
- function = "normal";
- output-low;
- power-source = <PM8941_GPIO_S3>;
- };
-
- wlan_sleep_clk_pin: wl-sleep-clk-state {
- pins = "gpio17";
- function = "func2";
- output-high;
- power-source = <PM8941_GPIO_S3>;
- };
-
- wlan_regulator_pin: wl-reg-active-state {
- pins = "gpio18";
- function = "normal";
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- };
-
- lcd_dcdc_en_pin_a: lcd-dcdc-en-active-state {
- pins = "gpio20";
- function = "normal";
- bias-disable;
- power-source = <PM8941_GPIO_S3>;
- input-disable;
- output-low;
- };
-};
-
-&pm8941_lpg {
- qcom,power-source = <1>;
-
- status = "okay";
-
- multi-led {
- color = <LED_COLOR_ID_RGB>;
- function = LED_FUNCTION_STATUS;
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- led@5 {
- reg = <5>;
- color = <LED_COLOR_ID_BLUE>;
- };
-
- led@6 {
- reg = <6>;
- color = <LED_COLOR_ID_GREEN>;
- };
-
- led@7 {
- reg = <7>;
- color = <LED_COLOR_ID_RED>;
- };
- };
-};
-
-&remoteproc_adsp {
- cx-supply = <&pm8841_s2>;
- status = "okay";
-};
-
-&remoteproc_mss {
- cx-supply = <&pm8841_s2>;
- mss-supply = <&pm8841_s3>;
- mx-supply = <&pm8841_s1>;
- pll-supply = <&pm8941_l12>;
- status = "okay";
-};
-
-&rpm_requests {
- regulators-0 {
- compatible = "qcom,rpm-pm8841-regulators";
-
- pm8841_s1: s1 {
- regulator-min-microvolt = <675000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s2: s2 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s3: s3 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
-
- pm8841_s4: s4 {
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1050000>;
- };
- };
-
- regulators-1 {
- compatible = "qcom,rpm-pm8941-regulators";
-
- vdd_l1_l3-supply = <&pm8941_s1>;
- vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
- vdd_l4_l11-supply = <&pm8941_s1>;
- vdd_l5_l7-supply = <&pm8941_s2>;
- vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
- vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
- vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
- vdd_l21-supply = <&vreg_boost>;
-
- pm8941_s1: s1 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_s2: s2 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- regulator-boot-on;
- };
-
- pm8941_s3: s3 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-system-load = <154000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_s4: s4 {
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- pm8941_l1: l1 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_l2: l2 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8941_l3: l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- pm8941_l4: l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- pm8941_l5: l5 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l6: l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- pm8941_l7: l7 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- };
-
- pm8941_l8: l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l9: l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- };
-
- pm8941_l11: l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
- pm8941_l12: l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- pm8941_l13: l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- regulator-boot-on;
- };
-
- pm8941_l14: l14 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- pm8941_l15: l15 {
- regulator-min-microvolt = <2050000>;
- regulator-max-microvolt = <2050000>;
- };
-
- pm8941_l16: l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pm8941_l17: l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- };
-
- pm8941_l18: l18 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pm8941_l19: l19 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
- pm8941_l20: l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-system-load = <500000>;
- regulator-allow-set-load;
- regulator-boot-on;
- };
-
- pm8941_l21: l21 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-boot-on;
- };
-
- pm8941_l22: l22 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- pm8941_l23: l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- pm8941_l24: l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3075000>;
- regulator-boot-on;
- };
-
- pm8941_lvs3: lvs3 {};
- };
-};
-
-&sdhc_1 {
- vmmc-supply = <&pm8941_l20>;
- vqmmc-supply = <&pm8941_s3>;
-
- pinctrl-0 = <&sdc1_on>;
- pinctrl-1 = <&sdc1_off>;
- pinctrl-names = "default", "sleep";
-
- status = "okay";
-};
-
-&sdhc_2 {
- vmmc-supply = <&pm8941_l21>;
- vqmmc-supply = <&pm8941_l13>;
-
- cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
-
- pinctrl-0 = <&sdc2_on>;
- pinctrl-1 = <&sdc2_off>;
- pinctrl-names = "default", "sleep";
-
- status = "okay";
-};
-
-&sdhc_3 {
- max-frequency = <100000000>;
- vmmc-supply = <&vreg_wlan>;
- non-removable;
-
- pinctrl-0 = <&sdc3_on>;
- pinctrl-names = "default";
-
- status = "okay";
-
- wifi@1 {
- compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
- reg = <1>;
-
- brcm,drive-strength = <10>;
-
- pinctrl-0 = <&wlan_sleep_clk_pin>;
- pinctrl-names = "default";
- };
-};
-
-&smbb {
- qcom,fast-charge-safe-current = <1500000>;
- qcom,fast-charge-current-limit = <1500000>;
- qcom,dc-current-limit = <1800000>;
- usb-charge-current-limit = <1800000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
-
- status = "okay";
-};
-
-&tlmm {
- lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
- pins = "gpio69";
- function = "gpio";
- drive-strength = <10>;
- output-low;
- bias-disable;
- };
-
- sdc1_on: sdc1-on-state {
- clk-pins {
- pins = "sdc1_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc1_cmd", "sdc1_data";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- sdc2_on: sdc2-on-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <6>;
- bias-disable;
- };
-
- cmd-data-pins {
- pins = "sdc2_cmd", "sdc2_data";
- drive-strength = <6>;
- bias-pull-up;
- };
-
- cd-pins {
- pins = "gpio62";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- sdc3_on: sdc3-on-state {
- clk-pins {
- pins = "gpio40";
- function = "sdc3";
- drive-strength = <10>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "gpio39";
- function = "sdc3";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "gpio35", "gpio36", "gpio37", "gpio38";
- function = "sdc3";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- ts_int_pin: ts-int-pin-state {
- pins = "gpio86";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-
- bt_host_wake_pin: bt-host-wake-state {
- pins = "gpio95";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- bt_dev_wake_pin: bt-dev-wake-state {
- pins = "gpio96";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
-};
-
-&usb {
- phys = <&usb_hs1_phy>;
- phy-select = <&tcsr 0xb000 0>;
- extcon = <&smbb>, <&usb_id>;
- vbus-supply = <&chg_otg>;
-
- hnp-disable;
- srp-disable;
- adp-disable;
-
- status = "okay";
-};
-
-&usb_hs1_phy {
- v1p8-supply = <&pm8941_l6>;
- v3p3-supply = <&pm8941_l24>;
-
- extcon = <&smbb>;
- qcom,init-seq = /bits/ 8 <0x1 0x64>;
-
- status = "okay";
-};
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi"
+
+/ {
+ model = "Sony Xperia Z2 Tablet";
+ compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
+ chassis-type = "tablet";
+
+ vreg_bl_vddio: lcd-backlight-vddio {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_bl_vddio";
+ regulator-min-microvolt = <3150000>;
+ regulator-max-microvolt = <3150000>;
+
+ gpio = <&tlmm 69 0>;
+ enable-active-high;
+
+ vin-supply = <&pm8941_s3>;
+ startup-delay-us = <70000>;
+
+ pinctrl-0 = <&lcd_backlight_en_pin_a>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp2_i2c5 {
+ clock-frequency = <355000>;
+
+ status = "okay";
+
+ lp8566_wled: backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+ power-supply = <&vreg_bl_vddio>;
+
+ bl-name = "backlight";
+ dev-ctrl = /bits/ 8 <0x05>;
+ init-brt = /bits/ 8 <0x3f>;
+
+ rom-a0h {
+ rom-addr = /bits/ 8 <0xa0>;
+ rom-val = /bits/ 8 <0xff>;
+ };
+ rom-a1h {
+ rom-addr = /bits/ 8 <0xa1>;
+ rom-val = /bits/ 8 <0x3f>;
+ };
+ rom-a2h {
+ rom-addr = /bits/ 8 <0xa2>;
+ rom-val = /bits/ 8 <0x20>;
+ };
+ rom-a3h {
+ rom-addr = /bits/ 8 <0xa3>;
+ rom-val = /bits/ 8 <0x5e>;
+ };
+ rom-a4h {
+ rom-addr = /bits/ 8 <0xa4>;
+ rom-val = /bits/ 8 <0x02>;
+ };
+ rom-a5h {
+ rom-addr = /bits/ 8 <0xa5>;
+ rom-val = /bits/ 8 <0x04>;
+ };
+ rom-a6h {
+ rom-addr = /bits/ 8 <0xa6>;
+ rom-val = /bits/ 8 <0x80>;
+ };
+ rom-a7h {
+ rom-addr = /bits/ 8 <0xa7>;
+ rom-val = /bits/ 8 <0xf7>;
+ };
+ rom-a9h {
+ rom-addr = /bits/ 8 <0xa9>;
+ rom-val = /bits/ 8 <0x80>;
+ };
+ rom-aah {
+ rom-addr = /bits/ 8 <0xaa>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ rom-aeh {
+ rom-addr = /bits/ 8 <0xae>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ };
+};
+
+&blsp2_uart1 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ max-speed = <3000000>;
+
+ pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
+ pinctrl-names = "default";
+
+ host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+ device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&pm8941_gpios {
+ bt_reg_on_pin: bt-reg-on-state {
+ pins = "gpio16";
+ function = "normal";
+ output-low;
+ power-source = <PM8941_GPIO_S3>;
+ };
+};
+
+&rpm_requests {
+ regulators-1 {
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+ };
+};
+
+&smbb {
+ qcom,fast-charge-safe-current = <1500000>;
+ qcom,fast-charge-current-limit = <1500000>;
+ qcom,dc-current-limit = <1800000>;
+ usb-charge-current-limit = <1800000>;
+ qcom,fast-charge-safe-voltage = <4400000>;
+ qcom,fast-charge-high-threshold-voltage = <4350000>;
+ qcom,fast-charge-low-threshold-voltage = <3400000>;
+ qcom,auto-recharge-threshold-voltage = <4200000>;
+ qcom,minimum-input-voltage = <4300000>;
+
+ status = "okay";
+};
+
+&synaptics_touchscreen {
+ vio-supply = <&pm8941_lvs3>;
+};
+
+&tlmm {
+ bt_dev_wake_pin: bt-dev-wake-state {
+ pins = "gpio96";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ bt_host_wake_pin: bt-host-wake-state {
+ pins = "gpio95";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
+ pins = "gpio69";
+ function = "gpio";
+ drive-strength = <10>;
+ output-low;
+ bias-disable;
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
similarity index 75%
copy from arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
copy to arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
index 20f98a9e49ea..3a0c0035de09 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-castor.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi
@@ -7,10 +7,6 @@
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
- model = "Sony Xperia Z2 Tablet";
- compatible = "sony,xperia-castor", "qcom,msm8974pro", "qcom,msm8974";
- chassis-type = "tablet";
-
aliases {
mmc0 = &sdhc_1;
mmc1 = &sdhc_2;
@@ -43,22 +39,6 @@ key-volume-up {
};
};
- vreg_bl_vddio: lcd-backlight-vddio {
- compatible = "regulator-fixed";
- regulator-name = "vreg_bl_vddio";
- regulator-min-microvolt = <3150000>;
- regulator-max-microvolt = <3150000>;
-
- gpio = <&tlmm 69 0>;
- enable-active-high;
-
- vin-supply = <&pm8941_s3>;
- startup-delay-us = <70000>;
-
- pinctrl-0 = <&lcd_backlight_en_pin_a>;
- pinctrl-names = "default";
- };
-
vreg_vsp: lcd-dcdc-regulator {
compatible = "regulator-fixed";
regulator-name = "vreg_vsp";
@@ -123,7 +103,7 @@ &blsp2_i2c2 {
status = "okay";
- synaptics@2c {
+ synaptics_touchscreen: synaptics@2c {
compatible = "syna,rmi4-i2c";
reg = <0x2c>;
@@ -134,7 +114,7 @@ synaptics@2c {
#size-cells = <0>;
vdd-supply = <&pm8941_l22>;
- vio-supply = <&pm8941_lvs3>;
+ /* vio-supply is set in dts */
pinctrl-0 = <&ts_int_pin>;
pinctrl-names = "default";
@@ -154,83 +134,6 @@ rmi4-f11@11 {
};
};
-&blsp2_i2c5 {
- clock-frequency = <355000>;
-
- status = "okay";
-
- lp8566_wled: backlight@2c {
- compatible = "ti,lp8556";
- reg = <0x2c>;
- power-supply = <&vreg_bl_vddio>;
-
- bl-name = "backlight";
- dev-ctrl = /bits/ 8 <0x05>;
- init-brt = /bits/ 8 <0x3f>;
-
- rom-a0h {
- rom-addr = /bits/ 8 <0xa0>;
- rom-val = /bits/ 8 <0xff>;
- };
- rom-a1h {
- rom-addr = /bits/ 8 <0xa1>;
- rom-val = /bits/ 8 <0x3f>;
- };
- rom-a2h {
- rom-addr = /bits/ 8 <0xa2>;
- rom-val = /bits/ 8 <0x20>;
- };
- rom-a3h {
- rom-addr = /bits/ 8 <0xa3>;
- rom-val = /bits/ 8 <0x5e>;
- };
- rom-a4h {
- rom-addr = /bits/ 8 <0xa4>;
- rom-val = /bits/ 8 <0x02>;
- };
- rom-a5h {
- rom-addr = /bits/ 8 <0xa5>;
- rom-val = /bits/ 8 <0x04>;
- };
- rom-a6h {
- rom-addr = /bits/ 8 <0xa6>;
- rom-val = /bits/ 8 <0x80>;
- };
- rom-a7h {
- rom-addr = /bits/ 8 <0xa7>;
- rom-val = /bits/ 8 <0xf7>;
- };
- rom-a9h {
- rom-addr = /bits/ 8 <0xa9>;
- rom-val = /bits/ 8 <0x80>;
- };
- rom-aah {
- rom-addr = /bits/ 8 <0xaa>;
- rom-val = /bits/ 8 <0x0f>;
- };
- rom-aeh {
- rom-addr = /bits/ 8 <0xae>;
- rom-val = /bits/ 8 <0x0f>;
- };
- };
-};
-
-&blsp2_uart1 {
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- max-speed = <3000000>;
-
- pinctrl-0 = <&bt_host_wake_pin>, <&bt_dev_wake_pin>, <&bt_reg_on_pin>;
- pinctrl-names = "default";
-
- host-wakeup-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
- device-wakeup-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&pm8941_gpios 16 GPIO_ACTIVE_HIGH>;
- };
-};
-
&pm8941_coincell {
qcom,rset-ohms = <2100>;
qcom,vset-millivolts = <3000>;
@@ -246,13 +149,6 @@ gpio_keys_pin_a: gpio-keys-active-state {
power-source = <PM8941_GPIO_S3>;
};
- bt_reg_on_pin: bt-reg-on-state {
- pins = "gpio16";
- function = "normal";
- output-low;
- power-source = <PM8941_GPIO_S3>;
- };
-
wlan_sleep_clk_pin: wl-sleep-clk-state {
pins = "gpio17";
function = "func2";
@@ -431,11 +327,6 @@ pm8941_l9: l9 {
regulator-max-microvolt = <2950000>;
};
- pm8941_l11: l11 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1350000>;
- };
-
pm8941_l12: l12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -474,11 +365,6 @@ pm8941_l18: l18 {
regulator-max-microvolt = <2850000>;
};
- pm8941_l19: l19 {
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- };
-
pm8941_l20: l20 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
@@ -558,29 +444,7 @@ wifi@1 {
};
};
-&smbb {
- qcom,fast-charge-safe-current = <1500000>;
- qcom,fast-charge-current-limit = <1500000>;
- qcom,dc-current-limit = <1800000>;
- usb-charge-current-limit = <1800000>;
- qcom,fast-charge-safe-voltage = <4400000>;
- qcom,fast-charge-high-threshold-voltage = <4350000>;
- qcom,fast-charge-low-threshold-voltage = <3400000>;
- qcom,auto-recharge-threshold-voltage = <4200000>;
- qcom,minimum-input-voltage = <4300000>;
-
- status = "okay";
-};
-
&tlmm {
- lcd_backlight_en_pin_a: lcd-backlight-vddio-state {
- pins = "gpio69";
- function = "gpio";
- drive-strength = <10>;
- output-low;
- bias-disable;
- };
-
sdc1_on: sdc1-on-state {
clk-pins {
pins = "sdc1_clk";
@@ -645,21 +509,6 @@ ts_int_pin: ts-int-pin-state {
drive-strength = <2>;
bias-disable;
};
-
- bt_host_wake_pin: bt-host-wake-state {
- pins = "gpio95";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
-
- bt_dev_wake_pin: bt-dev-wake-state {
- pins = "gpio96";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- };
};
&usb {
--
2.44.0