Re: [PATCH 1/3] arm64: dts: qcom: qdu1000: Add USB3 and PHY support

[Komal Bajaj]

On 3/11/2024 10:02 PM, Krzysztof Kozlowski wrote:
> On 11/03/2024 13:08, Komal Bajaj wrote:
> > @@ -6,6 +6,7 @@
> >   #include <dt-bindings/clock/qcom,qdu1000-gcc.h>
> >   #include <dt-bindings/clock/qcom,rpmh.h>
> >   #include <dt-bindings/dma/qcom-gpi.h>
> > +#include <dt-bindings/interconnect/qcom,icc.h>
> >   #include <dt-bindings/interconnect/qcom,qdu1000-rpmh.h>
> >   #include <dt-bindings/interrupt-controller/arm-gic.h>
> >   #include <dt-bindings/power/qcom-rpmpd.h>
> > @@ -913,6 +914,124 @@ opp-384000000 {
> >   			};
> >   		};
> >
> > +		usb_1_hsphy: phy@88e3000 {
> > +			compatible = "qcom,qdu1000-usb-hs-phy",
> > +				     "qcom,usb-snps-hs-7nm-phy";
> > +			reg = <0x0 0x088e3000 0x0 0x120>;
> > +			#phy-cells = <0>;
> > +
> > +			clocks =<&gcc GCC_USB2_CLKREF_EN>;
> > +			clock-names = "ref";
> > +
> > +			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
> > +
> > +			status = "disabled";
> > +		};
> > +
> > +		usb_1_qmpphy: phy-wrapper@88e5000 {
>
> That's a phy, isn't it? So node name "phy".

My mistake, will correct it.

Thanks
Komal

> Best regards,
> Krzysztof