Re: [PATCH v6 00/13] Add support for NIST P521 to ecdsa

[Jarkko Sakkinen]

On Tue Mar 19, 2024 at 8:55 PM EET, Stefan Berger wrote:
>
>
> On 3/19/24 14:22, Jarkko Sakkinen wrote:
> > On Tue Mar 19, 2024 at 12:42 AM EET, Stefan Berger wrote:
> >>
> >>
> >> On 3/18/24 14:48, Lukas Wunner wrote:
> >>> On Tue, Mar 12, 2024 at 02:36:05PM -0400, Stefan Berger wrote:
> >>>> This series adds support for the NIST P521 curve to the ecdsa module
> >>>> to enable signature verification with it.
> >>>
> >>> v6 of this series is still
> >>>
> >>> Tested-by: Lukas Wunner <lukas@xxxxxxxxx>
> >>
> >> Thanks.
> > 
> > This has been discussed before in LKML but generally tested-by for
> > series does not have semantical meaning.
> > 
> > Please apply only for patches that were tested.
>
> Ok, I will remove the Tested-by tag.
>
> However, patch 4/13, that only changes a comment, can also be tested in 
> so far as to check whether the code is correct as-is for the tests that 
> 'I' ran and no further modifications are needed for NIST P521. In this 
> case it would mean that a single subtraction of 'n' from res.x seems 
> sufficient and existing code is good as described by the modified comment.

So, since all patches are required to test anything at all, I think that
putting tested-by to 13/13 would be the most appropriate, right?

I without enabling this x509 parser, there is nothing to test, I'd
presume.

It doesn't have to be more complicated than this.

BR, Jarkko