[PATCH net V1] net: lan743x: Add set RFE read fifo threshold for PCI1x1x chips

[Raju Lakkaraju]

PCI11x1x Rev B0 devices might drop packets when receiving back to back frames
at 2.5G link speed. Change the B0 Rev device's Receive filtering Engine FIFO
threshold parameter from its hardware default of 4 to 3 dwords to prevent the
problem. Rev C0 and later hardware already defaults to 3 dwords.

Fixes: bb4f6bffe33c ("net: lan743x: Add PCI11010 / PCI11414 device IDs")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@xxxxxxxxxxxxx>
---
Change List:
------------
V0 -> V1:
  - misc_ctl change from int to unsigned int
  - Use FIELD_PREP macro instead of logical shift operator
  - Change 0x3 to macro RFE_RD_FIFO_TH_3_DWORDS

 drivers/net/ethernet/microchip/lan743x_main.c | 20 +++++++++++++++++++
 drivers/net/ethernet/microchip/lan743x_main.h |  4 ++++
 2 files changed, 24 insertions(+)

diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c
index bd8aa83b47e5..dca26a0734ec 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.c
+++ b/drivers/net/ethernet/microchip/lan743x_main.c
@@ -25,6 +25,8 @@
 #define PCS_POWER_STATE_DOWN	0x6
 #define PCS_POWER_STATE_UP	0x4
 
+#define RFE_RD_FIFO_TH_3_DWORDS	0x3
+
 static void pci11x1x_strap_get_status(struct lan743x_adapter *adapter)
 {
 	u32 chip_rev;
@@ -3272,6 +3274,23 @@ static void lan743x_full_cleanup(struct lan743x_adapter *adapter)
 	lan743x_pci_cleanup(adapter);
 }
 
+static int pci11x1x_set_rfe_rd_fifo_threshold(struct lan743x_adapter *adapter)
+{
+	u16 rev = adapter->csr.id_rev & ID_REV_CHIP_REV_MASK_;
+
+	if (rev == ID_REV_CHIP_REV_PCI11X1X_B0_) {
+		u32 misc_ctl;
+
+		misc_ctl = lan743x_csr_read(adapter, MISC_CTL_0);
+		misc_ctl &= ~MISC_CTL_0_RFE_READ_FIFO_MASK_;
+		misc_ctl |= FIELD_PREP(MISC_CTL_0_RFE_READ_FIFO_MASK_,
+				       RFE_RD_FIFO_TH_3_DWORDS);
+		lan743x_csr_write(adapter, MISC_CTL_0, misc_ctl);
+	}
+
+	return 0;
+}
+
 static int lan743x_hardware_init(struct lan743x_adapter *adapter,
 				 struct pci_dev *pdev)
 {
@@ -3287,6 +3306,7 @@ static int lan743x_hardware_init(struct lan743x_adapter *adapter,
 		pci11x1x_strap_get_status(adapter);
 		spin_lock_init(&adapter->eth_syslock_spinlock);
 		mutex_init(&adapter->sgmii_rw_lock);
+		pci11x1x_set_rfe_rd_fifo_threshold(adapter);
 	} else {
 		adapter->max_tx_channels = LAN743X_MAX_TX_CHANNELS;
 		adapter->used_tx_channels = LAN743X_USED_TX_CHANNELS;
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h
index be79cb0ae5af..645bc048e52e 100644
--- a/drivers/net/ethernet/microchip/lan743x_main.h
+++ b/drivers/net/ethernet/microchip/lan743x_main.h
@@ -26,6 +26,7 @@
 #define ID_REV_CHIP_REV_MASK_		(0x0000FFFF)
 #define ID_REV_CHIP_REV_A0_		(0x00000000)
 #define ID_REV_CHIP_REV_B0_		(0x00000010)
+#define ID_REV_CHIP_REV_PCI11X1X_B0_	(0x000000B0)
 
 #define FPGA_REV			(0x04)
 #define FPGA_REV_GET_MINOR_(fpga_rev)	(((fpga_rev) >> 8) & 0x000000FF)
@@ -311,6 +312,9 @@
 #define SGMII_CTL_LINK_STATUS_SOURCE_	BIT(8)
 #define SGMII_CTL_SGMII_POWER_DN_	BIT(1)
 
+#define MISC_CTL_0			(0x920)
+#define MISC_CTL_0_RFE_READ_FIFO_MASK_	GENMASK(6, 4)
+
 /* Vendor Specific SGMII MMD details */
 #define SR_VSMMD_PCS_ID1		0x0004
 #define SR_VSMMD_PCS_ID2		0x0005
-- 
2.34.1