[PATCH 1/2] arm64: dts: qcom: sm8250: describe HS signals properly

From: Dmitry Baryshkov
Date: Fri Mar 22 2024 - 07:58:50 EST


The OF graph should describe physical signals. There is no 'role switch'
signal between Type-C connector and the DWC3 USB controller. Instead
there is a HighSpeed signal lane between DWC3 controller and the USB-C
connector. Rename endpoints in accordance to that (this follows the
example lead by other plaforms, including QRB2210 RB1, QRB4210 RB2 and
all PMIC GLINK platforms).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 8 ++++----
arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 8 ++++----
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
3 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index cd0db4f31d4a..44239d1e57e9 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -1356,8 +1356,8 @@ &usb_1_dwc3 {
usb-role-switch;
};

-&usb_1_role_switch_out {
- remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+ remote-endpoint = <&pm8150b_hs_in>;
};

&usb_1_hsphy {
@@ -1465,8 +1465,8 @@ ports {

port@0 {
reg = <0>;
- pm8150b_role_switch_in: endpoint {
- remote-endpoint = <&usb_1_role_switch_out>;
+ pm8150b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs_out>;
};
};

diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
index 6f54f50a70b0..99915a2b97e2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
@@ -652,8 +652,8 @@ ports {
port@0 {
reg = <0>;

- pm8150b_role_switch_in: endpoint {
- remote-endpoint = <&usb_1_role_switch_out>;
+ pm8150b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs_out>;
};
};
};
@@ -716,8 +716,8 @@ &usb_1_hsphy {
status = "okay";
};

-&usb_1_role_switch_out {
- remote-endpoint = <&pm8150b_role_switch_in>;
+&usb_1_dwc3_hs_out {
+ remote-endpoint = <&pm8150b_hs_in>;
};

&ufs_mem_hc {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 39bd8f0eba1e..d57039a4c3aa 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4196,7 +4196,7 @@ usb_1_dwc3: usb@a600000 {
phy-names = "usb2-phy", "usb3-phy";

port {
- usb_1_role_switch_out: endpoint {};
+ usb_1_dwc3_hs_out: endpoint {};
};
};
};

--
2.39.2